SavedAdd your journal

Journals / Türkiye Ormancılık Dergisi / 2009 / Sayı: 2

Some physical and mechanical properties of cement bonded fiberboard exposed to accellerated aging

Hızlı yaşlandırma testlerine maruz bırakılmış çimentolu lif levhaların bazı fiziksel ve mekanik özellikleri

Ergün GÜNTEKİN
Pages
92–103
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Results indicate that fiber cement boards with Calabrian pine fibers are suitable for outdoor exposure conditions.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, some mechanical and physical properties before and after accelerated aging tests of the cement bonded fiberboard made of using Calabrian pine fibers have been investigated.
📊
Key Findings & Data:Comprehensive sets of replicated physical and flexural test data were generated, and were analyzed statistically.
💡
Conclusion & Impact:Results indicate that fiber cement boards with Calabrian pine fibers are suitable for outdoor exposure conditions.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:mekanik özellikler · fiziksel özellikler · lif levha

Abstract

In this study, some mechanical and physical properties before and after accelerated aging tests of the cement bonded fiberboard made of using Calabrian pine fibers have been investigated. Effects of density, wood / cement ratio, and accelerator (%) used in manufacturing experimental boards have been also studied. Comprehensive sets of replicated physical and flexural test data were generated, and were analyzed statistically. The results obtained in this study were indicative of significant effects of accelerated aging on physical and flexural performance of cement bonded fiberboard. Increase of density and percent of accelerators used generally causes an increase in mechanical properties. Percent accelerator used also cause an increase in TS and WA. Increase of fiber / cement ratio resulted in an increase in MOR, TS, and WA while a significant decrease was observed for modulus of elasticity. Results indicate that fiber cement boards with Calabrian pine fibers are suitable for outdoor exposure conditions.

Özet

Bu çalışmada, kızılçam lifleri ve ticari çimento kullanılarak laboratuar şartlarında üretilmiş çimentolu lif levhaların hızlandırılmış yaşlandırma testleri öncesi ve sonrasında bazı fiziksel ve mekanik özellikleri araştırılmıştır. Levhalar üzerinde ayrıca yoğunluğun, lif/çimento oranının ve kullanılan kimyasal oranının etkisi de incelenmiştir. Çalışma sonuçlarına göre hızlandırılmış yaşlandırma testleri fiziksel ve mekanik özellikleri azaltıcı etki yapmaktadır. Yoğunluğun ve kullanılan bağlayıcı oranının artırılması mekanik özellikleri genellikle önemli düzeyde arttırmaktadır. Lif/çimento oranının artması eğilme direnci, kalınlığına şişme ve su alma değerlerini önemli oranda arttırırken elastikiyet modülünü önemli ölçüde düşürmüştür. Çalışma sonuçlarına göre kızılçam lifleri kullanılarak üretilen çimentolu lif levhalar dış ortamda kullanılmaya elverişlidir.

🔖

Cite This Article

GÜNTEKİN, E. (2009). Some physical and mechanical properties of cement bonded fiberboard exposed to accellerated aging. Türkiye Ormancılık Dergisi, Sayı: 2, 92–103. https://ajindex.com/articles/358719

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Aamr-Daya, E., Langlet, T., Benazzouk, A., ve Quéneudec, M. 2008. Feasibility study of lightweight cement composite containing flax by-product particles: Physico-mechanical properties. Cement & Concrete Composites, 30: 957–963.
  2. Aggarwal, L.K., Agrawal, S.P., Thapliyal, P.C., ve Karade, S.R. 2008. Cement-bonded composite boards with arhar stalks. Cement & Concrete Composites, 30: 44–51. ASTM. 1998. Standard test methods of evaluating properties of wood-based fiber and particle panel materials. Annual Book of ASTM Standards, vol. 04-09. Philadelphia: American Society for Testing and Materials, ASTM D 1037. Ayaji, B. 2006. Properties of maize-stalk-based cement-bonded composites. Forest Products Journal, 56(6):51-55. Bektas, İ, Alma, M.H., As, N., Gundogan, R. 2003. Relationship between site index and several mechanical properties of Turkish calabrian pine (Pinus brutia Ten.), Forest Products Journal, 53(2): 27-31.
  3. Bejo, L., Takats, P., and Vass, N. 2005. Development of Cement Bonded Composite Beams. Acta Silvatica & Lingaria Hungarica, 1: 111-119
  4. Bilba, K., Arsene, M.A., ve Ouensanga, A. 2003. Sugar cane bagasse fibre reinforced cement composites. Part 1. Influence of the botanical components of bagasse on the setting of bagasse/cement composite. Cement & Concrete Composites, 25: 91-96.
  5. Dinwoodie, J.M. ve Paxton, B.H. 1991. The long term performance of cement bonded wood particleboard, in Proceedings 2nd Inorganic Bonded Wood and Fiber Composites Symposium, ed A. A. Moslemi, Forest Products Research Society, pp. 45-54.
  6. Fan, M., Bonfield, P., ve Dinwoodie, J. 2006. Nature and behaviour of cement bonded particleboard: structure, physical property and movement. Journal of Material Science, 41:5666–5678.
  7. Frybort, S., Mauritz, R., Teischinger, A., ve Müller, U. 2008. Cement Bonded Composites: A Mechanical Review. BioResources, 3 (2): 602- 626. Fuwape, J.A. 1995. The effect of cement-wood ratio on the strength properties of cement-bonded particleboard from spruce. Journal of Tropical Forest Products, 1:49-58.
  8. Goodell, B., Daniel, G., Liu, J., Mott, L., ve Frank, R. 1997. Decay resistance and microscopic analysis of wood-cement composites. Forest Products Journal, 47(11/12): 75-80.
  9. Hachmi, M. ve Campbell, A.G. 1989. Wood-cement chemical relationships, in Proceedings 1st Inorganic Bonded Fiber Composites Symposium, ed A.A. Moslemi, Forest Products Research Society, pp. 43-47.
  10. Hosfstarnd, A.D., Moslemi. A.A. ve Garcia, J.F. 1984. Curing characteristics of wood partic