Journals / Türkiye Ormancılık Dergisi / 2001 / Sayı: 2

Wood composits

Odun kompozitleri

Pages
135–160
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In the forest product industry .although many different products made by joining small wooden particles, fibres or relatively larger pieces have various names , as a whole, during the last fifteen years, these materials have been described under the name of "wood composites " In this article description, classification, production and usage of wood composite materials were introduced.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The term of "composite" describes the products which are made of two or more materials by bonding them with various glues.
📊
Key Findings & Data:On the other hand the term of wood composite is relatively new and is used to describe any material which is produced by gluing or joining of wooden material with other wooden material or the materials other than wood.
💡
Conclusion & Impact:In the forest product industry .although many different products made by joining small wooden particles, fibres or relatively larger pieces have various names , as a whole, during the last fifteen years, these materials have been described under the name of "wood composites " In this article description, classification, production and usage of wood composite materials were introduced.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:kereste · orta sertlikte lif levha · OSB

Abstract

The term of "composite" describes the products which are made of two or more materials by bonding them with various glues. On the other hand the term of wood composite is relatively new and is used to describe any material which is produced by gluing or joining of wooden material with other wooden material or the materials other than wood. In the forest product industry .although many different products made by joining small wooden particles, fibres or relatively larger pieces have various names , as a whole, during the last fifteen years, these materials have been described under the name of "wood composites " In this article description, classification, production and usage of wood composite materials were introduced.

Özet

Kompozit terimi farklı iki ya da daha fazla materyalin değişik yapıştırıcılarla bir araya getirilmesiyle oluşturulan malzemeleri ifade eder. Odun kompozitleri terimi ise oldukça yeni bir terimdir ve odunsu materyalin odunsu bir materyal ya da başka bir materyal ile yapıştirılması ya da birleştirilmesiyle elde edilen malzemeleri ifade etmektedir. Orman Ürünleri Endüstrisi 'nde küçük partiküllerin , liflerin ya da daha geniş odun parçalarının bir araya getirilmesiyle geliştirilmiş olan pek çok malzeme değişik isimlerle anılmaktadır. Bu malzemeler son 10-15 yıldır odun kompozitleri adı altında ifade edilmektedir. Bu makalede odun kompozitlerinin tanımı, sınıflandırılması, üretimi ve kullanım alanları tanıtılmaya çalışılmıştır.

🔖

Cite This Article

GÜLLER, B. (2001). Wood composits. Türkiye Ormancılık Dergisi, Sayı: 2, 135–160. https://ajindex.com/articles/358550

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (23)

  1. MALONEY,T.M., Terminology and Products Definitions A Suggested Approch to Uniformity Worldwide. In Proceedings, 18 th International Union of Forest Research Organization World Congress, Yugoslavia, September 1986
  2. MALLICK,P.K., Composites Engineering Handbook, Marcel Dekker,Inc., Newyork USA, 1997
  3. Forest Products Laboratory, Wood Handbook, Madison,WI: U.S.Department of Agriculture, Forest Service, 1999 [www.fpl.fs.fed.us(2000)]
  4. MALONEY,T.M.,The Family of Wood Composite Materials, Forest Products Journal, Vol:46, No:2,1996
  5. BOZKURT, A.Y., GÖKER, Y., Tabakalı Ağaç Malzeme Teknolojisi, İ.Ü.Yayın No:3401, Orman Fak.Yayın No:378, İstanbul,1986
  6. GÖKER, Y., Kontrplak, Laminart Ağustos-Eylül 2000 7. FAO, Plywood and Other Wood –Based Panels, Volume I,II,III,IV,V, Rome,1965
  7. TS 46,Kontrplaklar,TSE,Ankara,1971
  8. HAYGREEN,J.G., BOWYER,J.L., Forest Products and Wood Science,Third Edition. Iowa State Üniversity Press,Ames,Iowa,USA,1996
  9. FRONZAC,F.J., LOEHNERTZ, S.P., Powered back-up roll: New Technology for Peeling Veneer,US.Dept.of Agri. Forest Service, Res. Pap.,FPL-428,1982
  10. MALONEY,T.M., Development of Wood Composite Materials, Res. Pap., Pulmann,Wash.Washington State Univ.Wood Mtl.Lab.1994
  11. YILDIZ MDF A.Ş. www.yildizmdf.com(2000
  12. KUBLER,H., Wood as a Building and Hobby Material, Wiley and sons, Inc.,Canada,1980
  13. TS 180, Yongalevhaları (Yatık yongalı,Genel amaçlar için),TSE,Ankara,1978
  14. TS 1617, Yongalevhaları (Yatık yongalı, yapıda kullanılan), TSE,Ankara,1974
  15. EN 309, Wood Particleboards-Definition and Classification, European Committee Standardisation, Brussell,1992
  16. ÖKTEM,E.,Ormangülü (Rhodendron ponticum L.)Odunundan Yongalevha Yapılması Üzerine Araştırmalar, Doktora Tezi, 1978
  17. NEMLİ,G.,KALAYCIOĞLU,H., Yongalevha Teknolojisi, Laminart, Sayı:7,Nisan-Mayıs 2000
  18. BOZKURT,Y., GÖKER,Y., Yongalevha Endüstrisi Ders Kitabı, İ.Ü.Yayın No:3311, Orman Fak.Yayın No:372, İstanbul,1985
  19. MALONEY,T.M., Modern Particleboard and Dry-Process Fibreboard Manufacturing, Miller Fremann Publ., Inc., California,USA.,1993
  20. ASAN,S., Türkiye’de Yapay Levha Sanayii,H.Ü. Mühendislik Fakültesi, MTYO Ağaç İşleri End.Müh.Böl.(Basılmamış Ders Notu),Ankara,1989
  21. GÖKER,Y., Değişik Yöntemlerle Üretilmiş Yongalevhaların Kullanım Yerleri,Laminart,Sayı:7, Nisan-Mayıs 2000
  22. AKBULUT,T., Yongalevha Endüstrisi,Laminart,Sayı:7, Nisan- Mayıs 2000
  23. AYLA,C., OSB Üretim Teknolojisi, Laminart, Sayı:12,Şubat-Mart 2001 25. KAL