SavedAdd your journal

Journals / Türkiye Ormancılık Dergisi / 2004 / Sayı: 2

Base-catalyzed organic degnification systems

Alkali katalizatörlü organik degnifikasyon sistemleri

H. Turgut ŞAHİN
Birol ÜNER
Pages
141–159
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In this study, base-catalyzed organic solvents that have been using for pulping of biomass such as; methanol enforced kraft, organocell and IDE organic solvet pulping processes were studied.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Alkaline kraft pulping is most common chemical pulping process in the world at the present time.
📊
Key Findings & Data:But it has some problems that are related to air and water pollution with the very high investment and operational costs.
💡
Conclusion & Impact:In this study, base-catalyzed organic solvents that have been using for pulping of biomass such as; methanol enforced kraft, organocell and IDE organic solvet pulping processes were studied.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:delignifikasyon · lignin · işleme

Abstract

Alkaline kraft pulping is most common chemical pulping process in the world at the present time. But it has some problems that are related to air and water pollution with the very high investment and operational costs. The problems related to kraft pulping may be partly solved by using various techniques. Many new pulping process have been developed in labaratory studies that indicates' new features and advantages. In this study, base-catalyzed organic solvents that have been using for pulping of biomass such as; methanol enforced kraft, organocell and IDE organic solvet pulping processes were studied.

Özet

Alkali kraft metodu, günümüzde dünya genelinde en çok kullanılan kimyasal kağıt hamuru üretimi prosesidir. Fakat bu metodun bir çok dezavantajı bulunmaktadır. Özellikle havayı, suyu ve çevreyi kirletme özelliğindeki kimyasal maddeler kullanılmakta, oldukça yüksek yatırım ve işletme maliyetini gerektirmektedir. Hernekadar bu problemlerin tamamı elimine edilemese bile bir kısmının çözülmesi mümkündür. Labaratuvar ortamında geliştirilen yeni delignifıkasyon sistemlerinin birçok avantajı olduğuna inanılmaktadır. Bu çalışmada da, biyokütlenin deklignifıkasyonunda kullanılmak üzere, alkalilerin organik çözeltilere eklenmesiyle geliştirilen metanolle güçlendirilmiş kraft, organocell ve IDE prosesleri incelenecektir.

🔖

Cite This Article

ŞAHİN, H. T., ÜNER, B. (2004). Base-catalyzed organic degnification systems. Türkiye Ormancılık Dergisi, Sayı: 2, 141–159. https://ajindex.com/articles/358495

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (20)

  1. Aziz, S., Goyal, G. C. 1993. Kinetics of Delignification from Mechanistic and Process Control Point of View in Solvent Pulping Processes. In Tappi Pulping Conf, Atlanta, GA,, 917-920.
  2. Backman, M., Lonnberg, B., Ebeling, K., Henricson, K., Laxe*n, T. 1994. Impregnation-Depolymerization-Extraction. Paperi ja Puu vol. 76, no. 10, 644-648.
  3. Baumeister, M., Edel, E. 1980. Athanol-Wasser-Aufschluss. Das Papier 34(10A):V9-V18. Biermann, C. J. 1993. Essentials of Pulping and Papermaking. Academic Press Inc, San Diego CA. Daima, H., Hosoya, S., Nakano, J., Ishizu, A. 1978. Studies on Alkali-Methanol Cooking (IV) -Model Experiments for the Behaviors of Lignin and Carbohydrate during Cooking. Japan Tappi J 33(6): 54-58.
  4. Feckl, J., Edel, E. 1987. Organosolv pulping with addition of alkali - procedure and products. Fourth Int. Sym. on Wood and Pulping Chemistry Proc, Paris, France, 1:369-372.
  5. Fengel, D., Wegener, G. 1984.
  6. Wood, Chemistry, Ultrastructure, Reactions. Walter de Gruyter Public, Berlin, Germany. Fernandez E. O., Young, R. A. 1996. Properties of Cellulose Pulps from Acidic and Basic Processes. Cellulose 3:21-44.
  7. Gierer, J. 1982. The Chemistry of Delignification. Holzforschung 36(1):43—51. Hergert, H. 1998. Developments in Organosolv Pulping-an Overview. In Environmentally Friendly Tech. for Pulp and Paper Industry, R. Young and M. Akthar (Eds.), John Wiley Sons. Inc., 5-68.
  8. Hultholm, T., Westin, C, Lonnberg, B. 1999. The Novel IDE-Pulping Process. 13th International Papermaking Conference-Progress '99, Cracow, Poland, 22-24 Sept. 1999.
  9. Johanson, A., Aaltonen, O., Ylinen, P. 1987. Organosolv Pulping-Methods and Pulp Properties, Biomass 13,45-65
  10. Kocurek, M. J. 1989.
  11. Alkaline Pulping, Vol 5 Joint Texbook Committee of the Paper Industry, Tappi Press,
  12. Atlanta, GA. Marton, R., Granzow, S. 1982.
  13. Ethanol-Alkali Pulping, Tappi J. 65 (6): 103-106.
  14. McDonough, T. J. 1993. The Chemistry of Organosolv Delignification. Tappi J 76(8):186-193.
  15. Nakano, J., Takatsuka, C, Daima, H. 1976. Studies on Alkali-Methanol Cooking, (part 1), Behavior of Dissolution of Lignin and Carbohydrate. Japan Tappi 30(12): 33-38.
  16. Nimz, H. H., Casten, R. 1985.
  17. Organosolv Pulping with Acetic Acid, Procs. International Symposium on Wood and Pulping Chemistry, Vancouver, B.C, Canada, 265-266.
  18. Norman, E., Olm, L., Teder, A. 1992.
  19. Methanol-Reinforced Kraft Pulping, Solvent Pulping Symposium, Boston, MA, 51-60.
  20. Paszner, L., Cho, P.H. 1987. Review of Catalysed Organosolv Pulping, Solvent Pulping- Promises