SavedAdd your journal

Journals / Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi / 2007 / Cilt: 22 - Sayı: 2

Katmanlı üretim teknolojisinde bilgi transferi

Data tranfer in layered manufacturing

DURMUŞ ALİ BİRCAN
A. Kadir EKŞİ
Pages
39–53
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In this context, the informational needs in RP and various data transfer instances were identified and the need for neutral formats was shown.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Introducing new products at ever increasing rates is important for remaining successful in a competitive global economy; decreasing product development cycle times and increasing product complexity require new ways to take in novel ideas.
📊
Key Findings & Data:During the last decades, a new concept called Layered Manufacturing (LM), has gained popularity in Turkey and worldwide especially in the area of product development, prototyping and tooling.
💡
Conclusion & Impact:In this context, the informational needs in RP and various data transfer instances were identified and the need for neutral formats was shown.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Introducing new products at ever increasing rates is important for remaining successful in a competitive global economy; decreasing product development cycle times and increasing product complexity require new ways to take in novel ideas. During the last decades, a new concept called Layered Manufacturing (LM), has gained popularity in Turkey and worldwide especially in the area of product development, prototyping and tooling. The goal of Rapid Prototyping is to be able to quickly fabricate complex-shaped, three-dimensional parts directly from Computer Aided Design (CAD) models. In this study, the data formats and data transfer in LM was considered. A summary of existing data formats was presented. In this context, the informational needs in RP and various data transfer instances were identified and the need for neutral formats was shown.

Özet

Teknolojideki ilerlemeye ve günümüz rekabet şartlarının artmasına paralel olarak, her geçen gün daha karmaşık parça, makine ve sistemlerin daha hızlı, kolay ve ucuz bir şekilde imalatına ihtiyaç duyulmaktadır. Bu durum çok farklı ve yeni imalat teknolojilerinin geliştirilmesine öncülük etmektedir. Yeni imalat teknolojilerinde varılan son noktalardan biri olan Katmanlı Üretim (KÜ) Teknolojisi son 10 yıldan günümüze kadar Dünya'da ve Türkiye’de hızla gelişme göstermiş, özellikle ürün geliştirme, prototip ve kalıp imalatı konularında önemli ilerlemelere sebep olmuştur. Katmanlı Üretim teknolojileri 3 boyutlu tasarım programı ile hazırlanmış modellerden fiziksel prototipler üretmeyi sağlar. Bu çalışmada, Katmanlı Üretim teknolojisinde kullanılan bilgi formatları ve farklı formatlar arasındaki bilgi transferleri incelenmiştir. Bu amaçla, KÜ teknolojisindeki bilgi gereksinmeleri ve hali hazırda kullanılan ve araştırılan bilgi transfer protokolleri incelenmiş ve yeni bir bilgi transfer formatı ihtiyacı belirlenmiştir.

🔖

Cite This Article

BİRCAN, D. A., EKŞİ, A. K. (2007). Katmanlı üretim teknolojisinde bilgi transferi. Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi, Cilt: 22 - Sayı: 2, 39–53. https://ajindex.com/articles/350409

References (17)

  1. Barequet,G. and Kaplan,Y., “A data front-end for layered manufacturing”, Computer-Aided Design, Vol. 30 No. 4, pp. 231-243, 1998
  2. Marsan,A.L., Kumar,V., Dutta,D., Pratt,M.J., “An assessment of data requirements and data transfer formats for layered manufacturing”, NISTIR 6216, 1998
  3. Furrens, K.K. “Standards for the rapid prototyping industry”, Rapid Prototyping Journal, Vol. 5, No. 4, pp. 169-178, 1999
  4. Kumar,V. and Dutta,D., "An assessment of data formats for layered manufacturing", Advances in Engineering Software, Vol. 28, pp. 151-164, 1997
  5. Jacobs,P.F., “Rapid Prototyping and Manufacturing”, Society of Manufacturing Engineers, 1992
  6. Swaelens,B. and Kruth,J.P., “Medical applications of rapid prototyping techniques”, Proceedings of the Fourth International Conference on Rapid Prototyping, pp. 107-120, 1993
  7. Burns,M., “Automated Fabrication”, Prentice Hall, NJ, 1992
  8. Marsan,A. and Dutta,D., “Construction of a Surface Model and Layered Manufacturing Data From 3D Homogenization Output”, Journal of Mechanical Design, Vol. 118, No. 3, pp. 412-418, 1996
  9. Bohn,J., “Automatic CAD-Model Repair”, Ph.D. thesis, RPI, Troy, Aug. 1993
  10. Fadel,Georges,M. and Kirschman,C., “Accuracy Issues in CAD to RP Translations”, Rapid Prototyping Journal, vol. 2, no. 2, pp. 4-17, 1996
  11. Leong,K.F., Chua,C.K. and Ng,Y.M., “A study of stereolithography file errors and repair, Part I. Generic solution”, International Journal of Advanced Manufacturing Technology, 12, pp. 407- 414, 1996
  12. Leong,K.F., Chua,C.K. and Ng,Y.M., “A study of stereolithography file errors and repair. Part 2. Special cases”, International Journal of Advanced Manufacturing Technology, 12, pp. 415- 422, 1996
  13. Jurrens,K.K., “An Assessment of the State of the Art in Rapid Prototyping Systems for Mechanical Parts”, National Institute of Standards and Technology December 1993
  14. Bohn,Jan,H. and Wozny,M.J., “Automatic CAD-model Repair: Shell-Closure”, Solid Free- form Fabrication Symposium 1992, H. L. Marcus et al., eds. University of Texas, Austin, pp. 86-94, August 1992
  15. Bohn,Jan,H., “Removing Zero-Volume Parts from CAD Models for Layered Manufacturing”, IEEE Computer Graphics and Applications, vol. 15, no. 6, pp. 27-34, November 1995
  16. Makela,I. and Dolenc,A., “Some Efficient Procedures for Correcting Triangulated Models”, Solid Freeform Fabrication Symposium University of Texas, Austin, pp. 126-134, August 1993
  17. Rock, Stephen,J. and Wozny, Michael,J., “Generating