SavedAdd your journal

Journals / Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi / 2007 / Cilt: 22 - Sayı: 1

Joining of 5083-O, 5186-H111 and 5083-H111 aluminum alloys by friction stir welding

5083-O, 5186-H111 ve 5083-H111 alüminyum alaşımlarının sürtünme karıştırma kaynak yöntemiyle birleştirilmesi

Murat DİLEK
Durmuş Ali BİRCAN
Abdulkadir EKŞİ
Pages
255–268
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a metallurgical investigation, Optical Microscopy (OM) and Scanning Electron Microscopy (SEM) were used for both similar and dissimilar base and weld zones.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, 5083-O, 5186-H111 and 5083-H111 aluminum alloy plates were welded as similar and dissimilar joints using Friction Stir Welding (FSW) process.
📊
Key Findings & Data:In order to investigate the effect of welding speeds on properties; metallographic and mechanical tests were carried out on the welded areas of the parts.
💡
Conclusion & Impact:As a metallurgical investigation, Optical Microscopy (OM) and Scanning Electron Microscopy (SEM) were used for both similar and dissimilar base and weld zones.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, 5083-O, 5186-H111 and 5083-H111 aluminum alloy plates were welded as similar and dissimilar joints using Friction Stir Welding (FSW) process. In order to investigate the effect of welding speeds on properties; metallographic and mechanical tests were carried out on the welded areas of the parts. Hardness, tensile and fatigue tests of the joints experimentally assessed. As a metallurgical investigation, Optical Microscopy (OM) and Scanning Electron Microscopy (SEM) were used for both similar and dissimilar base and weld zones.

Özet

Bu çalışmada, 5083-O, 5186-H111 ve 5083-H111 alüminyum alaşımı levhalar Sürtünme Karıştırma Kaynak (SKK) yöntemiyle aynı ve farklı alaşım çifti oluşturacak şekilde kaynak edilmiştir. Kaynaklı birleştirmelerde metalografik ve mekanik testler yapılarak kaynak ilerleme hızının birleşme bölgesinin metalürjik ve mekanik özelliklerinde meydana getirdiği değişiklikler değerlendirilmiştir. SKK ile birleştirilmiş levhalardan incelenmek üzere numuneler alınarak çekme, sertlik ve yorulma testlerine tabi tutulmuş ve ölçümler alınmıştır. Kaynak bağlantılarının (kaynak bölgesi ve ana malzemeler) mikro yapısal özellikleri Optik Mikroskop (OM) ve Taramalı Elektron Mikroskop (TEM) görüntü analizleriyle incelenmiştir.

🔖

Cite This Article

DİLEK, M., BİRCAN, D. A., EKŞİ, A. (2007). Joining of 5083-O, 5186-H111 and 5083-H111 aluminum alloys by friction stir welding. Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi, Cilt: 22 - Sayı: 1, 255–268. https://ajindex.com/articles/350650

References (14)

  1. Külekci,M.K., “Mechanical Properties of Friction Stir-Welded Joints of AlCu4SiMg Aluminium Alloy”, Kovove Materialy, 41, 2, sayfa 97-105, 2003
  2. Thomas,W.M., Nicholas,E.D., Needham,J.C., Templesmith,P., Dawes,C.J and Murch,M.G., “Friction Stir Butt Welding”, Int Patent App PCT/GB92/02203 and GB Patent App 9125978.8, December 1991,US Patent No.5, 460, 317, 1995
  3. Shigematsu,I., Kwon,Y.J., Suzuki,K., Imai,T. and Saito,N., “Joining of 5083 and 6061 Aluminum Alloys by Friction Stir Welding”, Journal of Materials Science Letters, 22, sayfa.353– 356, 2003
  4. Kurt,A., Gazi Üniv. Müh. Mim. Fak. Der. Cilt 19, No 2, 191-197, 2004
  5. Smith,C.B., Hinrichs,J.F., Crusan,W.A. and Leverett,J., “FSW stirs up welding process competition”, Forming & Fabricating, 10, No.2, (February 2003)
  6. Çam,G., “Sürtünme Karıştırma Kaynağı (SKK): Al-Alaşımları İçin Geliştirilmiş Yeni Bir Kaynak Teknolojisi”, Mühendis ve Makine, Cilt 46, Sayı 541, S.30-39, Şubat 2005
  7. Sato,Y.S., Kokawa,H., Enomoto,M. and Jogan,S., “Microstructural Evolution of 6063 During Friction Stir Welding”, Metallurgical and Materials Transactions, 30A, sayfa.2429–2437, 1999
  8. Çam,G., “Sürtünme Karıştırma Kaynağındaki Gelişmeler”, Kaynak Teknolojisi IV. Ulusal Kongresi Bildiriler Kitabı, 47-64, Kocaeli, 24-25 Ekim
  9. Seidel,T.U and Reynolds,A.P., “Visualization of The Material Flow in AA2195 Friction-Stir Welds Using a Marker Insert Technique”, Metallurgical and Material Transactions A, cilt 32A, sayfa.2879-2884, 2001
  10. Dickerson,T., Shercliff,H.R. and Schmidt,H., “A Weld Marker Technique for Flow Visualization in Friction Stir Welding“, 4th International Symposium on Friction Stir Welding, Park City, Utah, USA, 14-16 May 2003
  11. USC Research and Health Sciences, www.sc.edu/research/pdf/FrictionStirWeld.pdf 12. Cabibbo,M., “TEM Analysis of a Friction Stir-Welded Butt Joint of Al–Si–Mg Alloys “, Materials Chemistry and Physics, 81, 289–292, 2003
  12. Chen,C.M., Kovacevic,R., “Joining of Al 6061 Alloy to AISI 1018 Steel by Combined Effects of Fusion and Solid State Welding”, International Journal of Machine Tools & Manufacture, Volume 44, Issue 11, Pages 1205-1214, September 2004
  13. Wert,J.A., “Microstructures of Friction Stir Weld Joints Between an Aluminium-Base Metal Matrix Composite and a Monolithic Aluminium Alloy”, Scripta Materialia 49 607–612, 2003
  14. Ekşi,A., Lipp,K., Sonsino,C.M., Veltl,G. and, Petzoldt,F., “Static and Fatigue Properties of The Cold and Warm Compacted Sintered Alumin