Journals / Türk Tarım - Gıda Bilim ve Teknoloji dergisi / 2021 / Cilt: 9 - Sayı: 6

Monitoring of Heavy Metal Pollution in Water and Sediments at the Mid-Black Sea Region by Using Passive Sampling Method Diffusive Gradients in Thin Films

Pages
7076–7086
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to the results of the study, the heavy metal concentration in grab sampling for water samples in descending order Al> Fe> Zn> Pb> Ni> Cu; In the samples taken with DGT, they are listed as Al> Fe> Zn> Cu> Ni> Pb.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Determining the potential bioavailability of heavy metals, evaluating according to adapted regulations is essential to efficiently conserve our coastal and estuarine waters.
📊
Key Findings & Data:There were significant relationships between the total metal concentrations of sediment (Csed) and water (Csu) in grab sampling and metal concentrations sediment (Csed-DGT) and water (Csu-DGT) measured by DGT.
💡
Conclusion & Impact:According to the results of the study, the heavy metal concentration in grab sampling for water samples in descending order Al> Fe> Zn> Pb> Ni> Cu; In the samples taken with DGT, they are listed as Al> Fe> Zn> Cu> Ni> Pb.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

Determining the potential bioavailability of heavy metals, evaluating according to adapted regulations is essential to efficiently conserve our coastal and estuarine waters. In this study, it is aimed to determine the industrial pollution and various other pollution sources that the Black Sea Basin is exposed to by using DGT (Diffusive Gradients in Thin Films) method and grab (manuel) sampling method in water and sediment and to evaluate the existing pollution according to quality standards. In Samsun, seasonal samples were collected from five different sampling stations, namely Akkiraz Stream, Hıdırellez Stream, Organized Industrial Zone (OIZ) Channel, Şabanoğlu Stream and Selyeri Stream, which are selected from Tekkeköy region where industry is intensively active. In order to determine the heavy metal content in both water and sediment samples, the DGT method was chosen for passive sampling and the grab sampling method was used for active sampling, and the efficiency of the methods was evaluated. According to the results of the study, the heavy metal concentration in grab sampling for water samples in descending order Al> Fe> Zn> Pb> Ni> Cu; In the samples taken with DGT, they are listed as Al> Fe> Zn> Cu> Ni> Pb. There were significant relationships between the total metal concentrations of sediment (Csed) and water (Csu) in grab sampling and metal concentrations sediment (Csed-DGT) and water (Csu-DGT) measured by DGT. It was found that the sensitivity and performance of sampling with DGT was 2- 10 times higher compared to grab sampling. The high resolution in situ DGT technique for the assessment and management of the potential release risk of heavy metals at the water-sediment interface is a complementary method that contributes to the standard grab sampling method.

🔖

Cite This Article

ŞİMŞEK, A., SANCAK, Ş., BAKAN, G. (2021). Monitoring of Heavy Metal Pollution in Water and Sediments at the Mid-Black Sea Region by Using Passive Sampling Method Diffusive Gradients in Thin Films. Türk Tarım - Gıda Bilim ve Teknoloji dergisi, Cilt: 9 - Sayı: 6, 7076–7086. https://ajindex.com/articles/330816

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (6)

  1. Akbal F, Gürel L, Bahadır T, Güler B, Bakan G, Büyükgüngör H. 2011. Multivariate Statistical Techniques for the Assessment of Surface Water Quality at the Mid-Black Sea Coast of Turkey. Water Air Soil Pollution, 216: 21– 37. doi.org/10.1007/s11270-010-0511-0.
  2. Alkan N, Alkan A, Akbas U, Fisher A. 2015. Metal Pollution Assessment in Sediments of The Southeastern Black Sea Coast of Turkey. Soil Sediment Contamination: An International Journal, 24:3, 290-305.
  3. Allan IJ, Knutsson J, Guigues N, Mills GA, Fouillac AM, Greenwood R. 2008. Chemcatcher® and DGT Passive Sampling Devices for Regulatory Monitoring of Trace Metals in Surface Water. Journal Environmental Monitoring, 10:821–829. doi.org/ 10.1039/B802581A. Alpsarı Pond (Korgun-Çankırı). Turkish Journal of Fisheries and Aquatic Sciences, 17, 1231-1243
  4. Amato ED, Simpson SL, Remaili TM, Spadaro DA, Jarolimek CV, Jolley DF. 2016. Assessing the Effects of Bioturbation on Metal Bioavailability in Contaminated Sediments by Diffusive Gradients in Thin Films (DGT). Environmental Science Technology, 50: 3055–3064. Atıcı T. 2004. Sarıyar Barajı Planktonik Algleri Kısım: I – Cyanophyta. Süleyman Demirel Üniversitesi Eğirdir Su Ürünleri Fakültesi Dergisi, 2 (12): 94. Aydın H, Ustaoğlu F, Tepe Y, Soylu EN. 2021 Assessment of Water Quality of Streams in Northeast Turkey by Water Quality Index and Multiple Statistical Methods. Environmental Forensics, https://doi.org/10.1080/15275922. 2020.1836074. Bakan G, Büyükgüngör H. 2000. The Black Sea. Marine Pollution Bulletin, Vol. 41: No. 1-6, 24-43. Bakan G. 1995. The Study of the Sapanca Lake Ecosystem; Sediment Characterization and Water Quality Modelling, Ph. D. Degree. Institute of Natural and Applied Sciences, METU, Ankara, Turkey. Bakan G. 2000. Çevre Sedimantolojisi ve Sediman Kalite Kriter Çalışmaları. Çevre Bilim ve Teknoloji, 1:1, 14-23.
  5. Bat L, Sezgin M, Gökkurt BO, Üstün F, Şahin F. 2013. Determination of Heavy Metals in Some Commercial Fish from the Black Sea Coast of Turkey. Walailak Journal Science Technology, 10:6, 581-9.
  6. Belzile N, Chen YW, Gunn JM, Dixit SS. 2004. Sediment Trace Metal Profiles in Lakes of Killarney Park, Canada: From Regional to Continental İnfluence. Environmental Pollution, 130: 239–48. doi.org/10.1016/j.envpol.2003.12.003. Budasheva H, Kravos A, Korte D, Bratkič A, Gao Y, Franko M. 2019. Determination of Dissolved İron Redox Species in Freshwater Sediment Using DGT Technique Coupled to BDS. Acta Chimica Slovenica, 66(1), 239-246. doi:https://d