Journals / Politeknik Dergisi / 2008 / Cilt: 11 - Sayı: 1

A DXF Based CAD/CAM System Designed For A CNC Wire EDM

CNC Tel Erozyon İçin Tasarlanan DXF Tabanlı Bir BDT/BDİ Sistemi

Pages
43–49
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Tool motion corresponding to the tool path can also be animated in the CAD environment

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this paper, a DXF based CAD/CAM system developed for CNC wire EDM is presented.
📊
Key Findings & Data:The CAD/CAM system includes both the automatic CNC code generating module and the simulation module which animates the tool path for 2D drawings designed in the CAD environment.
💡
Conclusion & Impact:Tool motion corresponding to the tool path can also be animated in the CAD environment
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:DXF · CAD/CAM · Simülasyon

Abstract

In this paper, a DXF based CAD/CAM system developed for CNC wire EDM is presented. The CAD/CAM system includes both the automatic CNC code generating module and the simulation module which animates the tool path for 2D drawings designed in the CAD environment. Visual BASIC and Visual LISP programming languages are used to develop the software in a computer. With the developed program, 2D drawings generated in a CAD environment are automatically converted into the DXF format and information belonging to the drawing is extracted by evaluating of the geometric entities represented in this format. This information is the types of curves (line, circle, arc, etc.), the coordinates of curves (start and end points, center points, etc.) and the special attributes of edge curves (radius, start and end angle of arc, etc.). Tool path for any 2D drawing designed by the user in a CAD environment can be generated using this information and the CNC codes corresponding to FANUC format can be obtained. Tool motion corresponding to the tool path can also be animated in the CAD environment

Özet

Bu makalede, CNC tel erozyon tezgahı için geliştirilen DXF tabanlı bir BDT/BDİ sistemi sunulmuştur. BDT/BDİ sistemi, BDT ortamında tasarlanan 2 boyutlu çizimler için hem bir otomatik CNC kod türetme modülünü, hem de takım yolunu canlandıran bir simülasyon modülünü içermektedir. Bilgisayarda yazılım geliştirmek için Visual BASIC ve Visual LISP programlama dilleri kullanılmıştır. Geliştirilen programla, BDT ortamında tasarlanan 2 boyutlu çizimler otomatik olarak DXF formatına dönüştürülmüş ve bu formatta temsil edilen geometrik unsurlar değerlendirilerek çizime ait bilgiler çıkarılmıştır. Bu bilgiler kenar eğrisi tipi (doğru, çember, yay, vs.), kenar eğrilerinin koordinatları (başlangıç ve bitiş noktaları, merkez noktaları, vs.) ve bazı kenar eğrisi nitelikleridir (yarıçap, yayın başlangıç ve bitiş açıları, vs.). Bu bilgiler kullanılarak BDT ortamında kullanıcı tarafından tasarlanan herhangi bir çizim için takım yolu oluşturulabilmekte ve FANUC formatına uygun CNC kodları türetilebilmektedir. Aynı zamanda, takım yoluna uygun olarak takım hareketi BDT ortamında canlandırılabilmektedir.

🔖

Cite This Article

ÇİÇEK, A. (2008). A DXF Based CAD/CAM System Designed For A CNC Wire EDM. Politeknik Dergisi, Cilt: 11 - Sayı: 1, 43–49. https://ajindex.com/articles/306737

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...