Journals / Hacettepe Journal of Biology and Chemistry / 2017 / Cilt: 45 - Sayı: 3

Electrooxidation of Formic Acid Using Pt Nanoparticles Supported on Conducting Poly Vinylferrocene Polymer Support

Poli vinilferrosen İletken Polimer Destekli Pt Nanopartikülleri Kullanarak Formik Asitin Elektroyükseltgenmesi

Pages
351–358
Publication Date
2017-09-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

When compared with methanol electrooxidation at the identical conditions, better results are achieved for formic acid oxidation.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Methanol as a fuel has some disadvantages such as toxicity and low electrocatalytic oxidation rate, therefore, alternative liquid fuels are of interest for fuel cell applications.
📊
Key Findings & Data:Formic acid has been considered as an alternative which fulfilled the requirements such as ease of transportation and handling and high theoretical open circuit voltage.
💡
Conclusion & Impact:When compared with methanol electrooxidation at the identical conditions, better results are achieved for formic acid oxidation.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Poli vinilferrosen · Pt nanopartikülleri · formik asit

Abstract

Methanol as a fuel has some disadvantages such as toxicity and low electrocatalytic oxidation rate, therefore, alternative liquid fuels are of interest for fuel cell applications. Formic acid has been considered as an alternative which fulfilled the requirements such as ease of transportation and handling and high theoretical open circuit voltage. Platinum supported on poly vinylferrocenium Pt/PVF is a promising catalyst for use in direct formic acid fuel cells. This work deals with electrooxidation of formic acid on Pt/PVF catalyst system and comparison of methanol and formic acid. According to the scanning electron microscopy SEM images, Pt particles are well dispersed over the polymer support. The Pt/PVF catalyst displays enhanced catalytic activity towards formic acid oxidation. When compared with methanol electrooxidation at the identical conditions, better results are achieved for formic acid oxidation.

Özet

Y akıt olarak metanolün toksisite ve düşük elektrokatalitik yükseltgenme hızı gibi bazı dezavantajları olduğu için yakıt pili uygulamalarında alternatif yakıtlar ilgi çekmektedir. Diğer taraftan, taşıma ve kullanım kolaylığının yanı sıra yüksek teorik açık devre potansiyeli gibi özellikleriyle dikkat çeken formik asit metanole alternatif olarak ortaya çıkmaktadır. Poli vinilferrosen destekli platin Pt/PVF doğrudan formik asit yakıt hücrelerinde kullanım için gelecek vadeden bir katalizördür. Bu çalışmada Pt/PVF katalizör sistemiyle formik asitin elektroyükseltgenmesi ile metanol ve formik asitin karşılaştırılması yer almaktadır. Taramalı elektron mikroskobu görüntülerine göre, Pt tanecikleri polimer destek üzerinde düzgün dağılmıştır. Pt/PVF katalizörü formik asit yükseltgenmesi için yüksek katalitik aktivite göstermiştir. Aynı koşullarda metanolün elektroyükseltgenmesiyle karşılaştırıldığında, formik asit için daha iyi sonuçlar elde edilmiştir

🔖

Cite This Article

ÇELEBİ, M. S., PEKMEZ, K. (2017). Electrooxidation of Formic Acid Using Pt Nanoparticles Supported on Conducting Poly Vinylferrocene Polymer Support. Hacettepe Journal of Biology and Chemistry, Cilt: 45 - Sayı: 3, 351–358. https://ajindex.com/articles/255877

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. X. Yu, P.G. Pickup, Recent advances in direct formic acid fuel cells (DFAFC), J. Power Sources, 182 (2008) 124-132
  2. B. Liu, H.Y. Li, L. Die, XH. Zhang, Z. Fan, J.H. Chen, Carbon nanotubes supported PtPd hollow nanospheres for formic acid electrooxidation, J. Power Sources, 186 (2009) 62-66
  3. S. Wang, N. Kristian, S. Jiang, X. Wang, Controlled deposition of Pt on Au nanorods and their catalytic activity towards formic acid oxidation, Electrochem. Commun., 10 (2008) 961-964
  4. X. Wang, Y. Tang, Y. Gao, T. Lu, Carbon-supported Pd– Ir catalyst as anodic catalyst in direct formic acid fuel cell, J. Power Sources, 175 (2008) 784-788
  5. Y.N. Wu, S.J. Liao, Y.L. Su, J.H. Zeng, D. Dang, Enhancement of anodic oxidation of formic acid on palladium decorated Pt/C catalyst, J. Power Sources, 195 (2010) 6459-6462
  6. V. Selvaraj, M. Alagar, I. Hamerton, Nanocatalysts impregnated polythiophene electrodes for the electrooxidation of formic acid, Appl. Catal. B-Environ., 73 (2007) 172-179
  7. Z. Liu, L. Hong, M.P. Tham, T.H. Lim, H. Jiang, Nanostructured Pt/C and Pd/C catalysts for direct formic acid fuel cells, J. Power Sources, 161 (2006) 831-835
  8. W. Zhou, C. Wang, J. Xu, Y. Du, P. Yang, High efficient electrooxidation of formic acid at a novel Pt–indole composite catalyst prepared by electrochemical selfassembly, J. Power Sources, 196 (2011) 1118-1122
  9. J. Shi, Z.Y. Zhang, Y.Q. Hu, Y.X. Hua, Incorporation of 4-aminobenzene functionalized multi-walled carbon nanotubes in polyaniline for application in formic acid electrooxidation, J. Appl. Polym. Sci., 118 (2010) 1815-1820
  10. E. Antolini, Carbon supports for low-temperature fuel cell catalysts, Appl. Catal. B-Environ., 88 (2009) 1-24
  11. M. Sönmez Çelebi, K. Pekmez, H. Özyörük, A. Yıldız, Preparation and physical/electrochemical characterization of Pt/poly(vinylferrocenium) electrocatalyst for methanol oxidation, J. Power Sources, 183 (2008) 8-13
  12. M. Sönmez Çelebi, K. Pekmez, H. Özyörük, A. Yıldız, Electrochemical synthesis of Pd particles on poly(vinylferrocenium), Catal. Commun., 9 (2008) 2175-2178
  13. W. Zhou, J. Xu, Y. Du, P. Yang, Polycarbazole as an efficient promoter for electrocatalytic oxidation of formic acid on Pt and Pt–Ru nanoparticles, Int. J. Hydrogen Energy, 36 (2011) 1903-1912
  14. G. Zhang, B. Ding, L. Wu, L. He, B. Ni, J. Lu, Possible tuning fabrication of nanoplatinum particles with the conducting copolymer films and their behavior toward the electrooxidation of methanol, J. App