EFFECT OF SURFACE SEALING ON STAIN RESISTANCE OF A NANO-HYBRID RESIN COMPOSITE

For 7 daysevaluation period, the difference between G3 and G4group was statistically significant while G4 exhibitedstatistically significant differences (p<0.05 andp<0.0001 respectively) compared to control (G1) in14 day whereas no significant difference was foundbetween GI and GII in 28-day evaluation period.However, ΔE values of sealed specimens (GIII, GIV)differed significantly from non-sealed (GI) specimensafter 28 days of immersion in coffee solution (p<0.05and p<0.0001 respectively).Conclusion: It may be concluded that using abonding agent as a surface sealant does not increasestain resistance of resin composites of the sealantsevaluated.

📌 3 Key Takeaways

🎯

Objective & Hypothesis:Purpose: This study investigated the influence ofsealant application on stain resistance of a nanohybridresin composite compared to the efficacy of abonding agent used as a surface sealant on prolongingcolor stability of the resin composite.Materials and Methods: 28 disc-shaped materialswere prepared from a nano-hybrid resin compositeFiltek Z550 and assigned to four groups: G1K: nonsealed;G2:Adper Single Bond; G3: Fortify ; G4:Biscover LV.

📊

Key Findings & Data:After 24 h storage in distilled water at37˚C, all specimens were subjected to thermocyclingand immersed into coffee solution.

💡

Conclusion & Impact:For 7 daysevaluation period, the difference between G3 and G4group was statistically significant while G4 exhibitedstatistically significant differences (p<0.05 andp<0.0001 respectively) compared to control (G1) in14 day whereas no significant difference was foundbetween GI and GII in 28-day evaluation period.However, ΔE values of sealed specimens (GIII, GIV)differed significantly from non-sealed (GI) specimensafter 28 days of immersion in coffee solution (p<0.05and p<0.0001 respectively).Conclusion: It may be concluded that using abonding agent as a surface sealant does not increasestain resistance of resin composites of the sealantsevaluated.

🔬Design:Research Article

📍Scope:Comprehensive Sample

⚙️Variables:Renk · yüzey örtücü · renkleşme

Abstract

Purpose: This study investigated the influence ofsealant application on stain resistance of a nanohybridresin composite compared to the efficacy of abonding agent used as a surface sealant on prolongingcolor stability of the resin composite.Materials and Methods: 28 disc-shaped materialswere prepared from a nano-hybrid resin compositeFiltek Z550 and assigned to four groups: G1K: nonsealed;G2:Adper Single Bond; G3: Fortify ; G4:Biscover LV. After 24 h storage in distilled water at37˚C, all specimens were subjected to thermocyclingand immersed into coffee solution. Color measurementswere performed using spectrophotometer (VITAEasyshade; Vident) according to CIEL*a*b* system.Results: Color change values were significantlydifferent among the groups in each evaluation periodexcept for after thermocycling (p<0.05). For 7 daysevaluation period, the difference between G3 and G4group was statistically significant while G4 exhibitedstatistically significant differences (p<0.05 andp<0.0001 respectively) compared to control (G1) in14 day whereas no significant difference was foundbetween GI and GII in 28-day evaluation period.However, ΔE values of sealed specimens (GIII, GIV)differed significantly from non-sealed (GI) specimensafter 28 days of immersion in coffee solution (p<0.05and p<0.0001 respectively).Conclusion: It may be concluded that using abonding agent as a surface sealant does not increasestain resistance of resin composites of the sealantsevaluated. Biscover LV showed the highest efficacyto prolong color stability of the resin composite.

Özet

Amaç: Bu çalışmada nanohibrit yapıda bir reçine kompozit yüzeyine uygulanan yüzey örtücülerin ve dentin bağlayıcı ajan uygulanmasının; kompozitin (Filtek Z550) renkleşmeye karşı direnci üzerine etkisinin araştırılması amaçlanmıştır.Gereç ve Yöntem: Çalışmada 28 adet Filtek Z550 nano hibrit kompozitten hazırlanan disk biçimindeki örnekler 4 gruba ayrılmıştır: G1K: yüzey örtücü uygulanmamış; G2:Adper Single Bond, G3:Fortify, G4: Biscover LV. 24 saat 37˚C de distile suda bekletilip termosiklus uygulanan örnekler daha sonra günde 3 kere olmak üzere toplam 28 gün kahve solüsyonunda bekletilmişlerdir.Bulgular: Başlangıç değerleri dışında, gruplar arası renk değişim değerleri, tüm zaman aralıklarında istatistiksel olarak anlamlı derecede farklı bulunmuştur (p < 0.05). 7 günün sonunda, gruplar karşılaştırıldığında G3 ve G4 grupları arasında istatistiksel olarak anlamlı derecede fark bulunmuştur. G4 grubu 14 günün sonunda kontrol grubuna göre istatistiksel olarak anlamlı derecede farklılık göstermiştir. Ancak 28 günlük deney sonucunda, GIII (p < 0.05) ve GIV (p < 0.0001) gruplarına ait ∆E değerleri istatistiksel olarak kontrol grubuna göre anlamlı bulunmuştur.Sonuç: Bağlayıcı ajanın yüzey örtücü olarak kullanılmasının kompozitin renkleşmeye karşı direncini yeterli düzeyde arttırmadığı, Biscover LV yüzey örtücünün kompozitin renk stabilitesinin uzun dönem sağlanmasında en yüksek değerleri verdiği sonucuna varılmıştır

Keywords

Renk yüzey örtücü renkleşme kompozit kahve Color surface sealant discoloration composite coffee

🔖

Cite This Article

SAYGI, G., KARAKOÇ, P., SERBES, İ., ÖZEL, S., ERDEMİR, U., YÜCEL, T. (2015). EFFECT OF SURFACE SEALING ON STAIN RESISTANCE OF A NANO-HYBRID RESIN COMPOSITE. European Oral Research, Cilt: 49 - Sayı: 2, 23–30. https://ajindex.com/articles/243243

📄 Full Text PDF Viewer

Open in New Tab ↗

↗New Tab

📄

PDF görüntüleyici hazırlanıyor...

References (15)

Kang A, Son SA, Hur B, Kwon YH, Ro JH, Park JK. The color stability of silorane- and methacrylate-based resin composites. Dent Mater J 2012;31(5):879-884.
Vichi A, Ferrari M, Davidson CL. Color and opacity variations in three different resin-based composite products after water aging. Dent Mater 2004;20(6):530-534.
Malekipour MR, Sharafi A, Kazemi S, Khazaei S, Shirani F. Comparison of color stability of a composite resin in different color media. Dent Res J (Isfahan) 2012;9(4):441-446.
Aguilar FG, Roberti Garcia Lda F, Cruvinel DR, Sousa AB, de CarvalhoPanzeriPires-de-Souza F. Color and opacity of composites protected with surface sealants and submitted to artificial accelerated aging Eur J Dent. 2012;6(1):24-33.
Lepri CP, Palma-Dibb RG. Surface roughness and color change of a composite: influence of beverages and brushing. Dent Mater J 2012;31(4):689-696.
Topcu FT, Sahinkesen G, Yamanel K, Erdemir U, Oktay EA, Ersahan S. Influence of different drinks on the colour stability of dental resin composites Eur J Dent. 2009;3(1):50-56.
Park JK, Kim TH, Ko CC, García-Godoy F, Kim HI, Kwon YH. Effect of staining solutions on discoloration of resin nanocomposites. Am J Dent 2010;23(1):39-42.
Zimmerli B, Koch T, Flury S, Lussi A. The influence of toothbrushing and coffee staining on different composite surface coatings. Clin Oral Investig 2012;16(2):469-479.
Lu H, Powers JM. Color stability of resin cements after accelerated aging. Am J Dent 2004;17(5):354–358.
Ertaş E, Güler AU, Yücel AC, Köprülü H, Güler E. Color stability of resin composites after immersion in different drinks. Dent Mater J 2006;25(2):371-376.
Bansal K, Acharya SR, Saraswathi V. Effect of alcoholic and non-alcoholic beverages on color stability and surface roughness of resin composites: An in vitro study. J Conserv Dent 2012;15(3):283-288.
Catelan A, Briso AL, Sundfeld RH, Dos Santos PH. Effect of artificial aging on the roughness and microhardness of sealed composites. J Esthet Restor Dent 2010;22(5):324-330.
Lisante TA, McGuire JA, Williams KP. The staining potential of various currently marketed mouthrinses. J Clin Dent 2013;24(1):5-11.
Raptis CN, Powers JM, Fan PL, Yu R. Staining of composite resins by cigarette smoke J Oral Rehabil 1982;9(4):367-371.
Ramos RP, Chimello DT, Chinelatti MA, Dibb RG, Mondelli J. Effect of three surface sealants on marginal sealing of Class V composite resin restorations. Oper Dent 2000;25(5):448-453. Cilli R, de Mattos MC, Honorio HM, Rios D, de Araujo PA, Prak