SavedAdd your journal

Journals / Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi / 2001 / Cilt: 16 - Sayı: 1

THE EFFECT OF THERMOMECHANICAL PROCESSING ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF A LOW CARBON STEEL WELD

Düşük Karbonlu Bir Çeliğin Kaynağında Termomekanik İşlemin Mikroyapı Ve Mekanik Özelliklere Etkisi

Kubilay KARACİF
Burhanettin İNEM
Pages
1–8
Publication Date
2013-03-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Impact resistance of specimensincreased in heat affected zone whereas that of weld metal decreased slightly.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The microstructural refinement of weld zone in a low carbon steel bythermomechanical processing have been studied.
📊
Key Findings & Data:The thermomechanicalprocessing resulted in a significant grain refinement in both weld metal and heataffected zone.
💡
Conclusion & Impact:Impact resistance of specimensincreased in heat affected zone whereas that of weld metal decreased slightly.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Termomekanik işlem · tane inceltme · kaynak

Abstract

The microstructural refinement of weld zone in a low carbon steel bythermomechanical processing have been studied. The steel specimens were weldedusing MAG (Metal Active Gas) tecnique. With the heat of weld zone hot plasticdeformation was applied on weld metal by rolling. The thermomechanicalprocessing resulted in a significant grain refinement in both weld metal and heataffected zone. The hardness of weld metal increased. Impact resistance of specimensincreased in heat affected zone whereas that of weld metal decreased slightly.

Özet

Bu çalışmada düşük karbonlu bir çelik sacın kaynak bölgesi özelliklerinin geliştirilmesi, kaynak dikişine uygulanan termomekanik işlem yoluyla denenmiştir. Kaynak işleminin devamında, yüksek sıcaklıklardaki kaynak dikişi haddelemeişlemine tabi tutularak sıcak plastik deformasyon sağlanmıştır. Deneysel çalışmalar ile numunelerde, mikroyapı, sertlik ve darbe direnci özellikleri incelenmiştir. Bu incelemeler sonucunda; mikroyapıda tane boyutunda küçülme, kaynak metali sertliğinde artış tespit edilmiştir. Darbe direnci, kaynak metalinde azalırken, ısı tesiri altındaki bölgede artmıştır.

🔖

Cite This Article

KARACİF, K., İNEM, B. (2013). THE EFFECT OF THERMOMECHANICAL PROCESSING ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF A LOW CARBON STEEL WELD. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, Cilt: 16 - Sayı: 1, 1–8. https://ajindex.com/articles/21392

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Cerjak, H. ve Easterling K.E., Mathematical Modelling of Weld Phenomena, The Institute of Materials, Londra, 1992.
  2. Yükler, İ., Kaynak Metali, Marmara Üniversitesi Yayını, İstanbul, 1986.
  3. Petersen, W.A., “Fine Grained Weld Structures”, Welding Journal, Cilt 52, -79, 1973.
  4. Kou, Y. ve Le, Y., “Grain Structure and Solidification Cracking in Oscillated Arc Welds of 5052 Aluminium Alloy”, Metallurgical Transactions A, 16 A, -1352, 1985.
  5. Garland, J.G., “Weld Pool Solidification Control”, Metal Construction and British Welding Journal, 121-127, Nisan 1974.
  6. Tseng, C.F. ve Savage, W.F., “Effect of Arc Oscilation”, Welding Journal, Cilt 50, 777-786, 1971.
  7. Sharir, Y., Pelleg, J. ve Grill, A., “Effect of Arc Vibration and Current Pulses on Microstructure and Mechanical Properties of TIG Tantalum Welds”, Metals Technology, 190-196, Haziran 1978.
  8. Tewari, S.P. ve Shanker, A., “Microstructural Changes Associated with Vibratory Prepared Weldments”, Journal of Materials Science Letters, Cilt, 1335-1336, 1993.
  9. Pearce, B.P. ve Kerr, H.W., “Grain Refinement in Magnetically Stirred GTA Welds of Aluminum Alloys”, Metallurgical Transactions B, Cilt 12 B, 479-, 1981.
  10. Karacif, K., Kaynak Bölgesi Özelliklerinin Termomekanik İşlem İle Geliştirilmesi (Modifikasyon), Yüksek Lisans Tezi, G.Ü.F.B.E., Ankara, 1998.
  11. Askeland, D.R., The Science and Engineering of Materials, Second Edition, - Heine, R.,W., Loper, C.,R. ve Rosenthal, P.,C., Principles of Metal Casting, McGraw-Hill Publishing Company Ltd., New Delhi, 1979.