Journals / Gülhane Tıp Dergisi / 2016 / Cilt: 58 - Sayı: 4

Rapid debonding of ceramic orthodontic brackets with a Nd:YAG laser

Seramik ortodontik braketlerin Nd:YAG lazer ile hızlı sökümü

Pages
348–352
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The current findings indicate that it is possible to benefit from Nd:YAG laser with appropriate parameters for debonding ceramic orthodontic brackets

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Rapid debonding of ceramic orthodontic brackets with a Nd:YAG laser The purpose of this study was to develop an effective method for debonding ceramic orthodontic brackets with two different power Nd:YAG laser.
📊
Key Findings & Data:In this study 30 freshly extracted upper first premolar human teeth were used and randomly divided into three groups of 10.
💡
Conclusion & Impact:The current findings indicate that it is possible to benefit from Nd:YAG laser with appropriate parameters for debonding ceramic orthodontic brackets
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Rapid debonding of ceramic orthodontic brackets with a Nd:YAG laser The purpose of this study was to develop an effective method for debonding ceramic orthodontic brackets with two different power Nd:YAG laser. In this study 30 freshly extracted upper first premolar human teeth were used and randomly divided into three groups of 10. Group I was the control group, with no laser application performed; Group II, Nd:YAG laser with 2W for 5 seconds with the scanning method; Group III, Nd:YAG laser with 3W for 5 seconds with the scanning method. The teeth were embedded in self cure acrylic in a vertical position so that the crowns were exposed. Polycrystalline ceramic brackets were bonded to all teeth with a standard procedure and the teeth in group II and III were scanned with an Nd:YAG laser and then subjected to shear bond strength (SBS) test. The adhesive remnant index (ARI) was then evaluated for each specimen. Statistical analysis was performed using one-way analysis of variance and the post hoc Tukey tests, with the significance level set at 0.05. Mean shear bond values for each group were as follows: I, 13.30 ±1.05; II, 8.25 ±0.69; III, 5.97 ±0.77. While group I (control group) showed the highest SBS values, group III (Nd:YAG laser with 3W group) showed the lowest SBS values and a statistically significant difference was observed between groups. The evaluation of ARI scores demonstrated more adhesive was left on the enamel surface with Group I. The current findings indicate that it is possible to benefit from Nd:YAG laser with appropriate parameters for debonding ceramic orthodontic brackets

Özet

Bu çalışmanın amacı seramik ortodontik braketlerin iki farklı güçte Nd:YAG lazer ile sökümü için etkili bir yöntem geliştirmektir. Bu çalışmada 30 yeni çekilmiş insan daimi üstçene 1.küçük azı dişleri kullanıldı ve 10'luk rastgele üç gruba ayrıldı. I. grup kontrol grubu olup, lazer uygulaması yapılmadı. II. grup 2W gücündeki Nd:YAG lazer tarama metoduyla 5 saniye uygulandı, III: 3W gücündeki Nd:YAG lazer tarama metoduyla 5 saniye uygulandı. Dişler sonra kuronları açığa çıkacak şekilde dikey bir pozisyonda self cure akriliğe gömüldü. Polikristalin seramik raketler standart bir işlemle tüm dişlere yapıştırıldı ve grup II,III örnekleri bir Nd:YAG lazer ile tarandı. Tüm dişler makaslama bağlanma dayanımı (SBS) testine tabii tutuldu. Her bir örnek için artık adeziv indeksi (ARI) incelendi. İstatistikel analiz tek yönlü varyans analizi ve Tukey karşılaştırma testleri ile anlamlılık seviyesi 0.05 olacak şekilde yapıldı. Her bir grup için ortalama makaslama test sonuçları şöyledir: I, 13.30 ±1.05; II, 8.25 ±0.69; III, 5.97 ±0.77. I. grup (kontrol grubu) en yüksek SBS değerlerini gösterirken, III. grup (3W'lı Nd:YAG lazer grubu) en düşük SBS değerlerini gösterdi ve grupları arasında istatistiksel olarak anlamlı bir farklılık gözlendi. Her bir örnek için ARI skorları değerlendirildi İstatiksel analizler anlamlılık seviyesi 0.05 ile tek yönlü varyans analizi ve Tukey testi kullanıldı. Mevcut Bulgular seramik ortodontik braketlerin sökümü için uygun özelliklerdeki Nd:YAG lazerden faydalanmanın mümkün olduğunu göstermektedir

🔖

Cite This Article

SABUNCUOĞLU, F. A., ERŞAHAN, Ş. (2016). Rapid debonding of ceramic orthodontic brackets with a Nd:YAG laser. Gülhane Tıp Dergisi, Cilt: 58 - Sayı: 4, 348–352. https://ajindex.com/articles/198367

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (16)

  1. Bishara SE, Trulove TS. Comparisons of different de￾bonding techniques for ceramic brackets: an in-vitro study. Part 1. Background and methods. Am J Orthod Dentofacial Orthop 1990;98:145-153
  2. Tocchio RM, Williams PT, Mayer FS, Standing KG. La￾ser debonding of ceramic orthodontic brackets. Am J Orthod Dentofacial Orthop 1993;103:155-162
  3. Swartz ML. Ceramic brackets. J Clin Orthod 1988;22:82- 8
  4. Jerioudi MJ. Enamel fracture caused by ceramic brackets. Am J Orthod Dentofacial Orthop 1991;99:97- 99
  5. Bishara SE, Fehr DE, Jakobsen JR. A comparative study of the debonding strengths of different ceramic brackets, enamel conditioners, and adhesives. Am J Orthod Dentofacial Orthop 1993;104:170-179
  6. Wool AL. A better debonding procedure. AmJ Orthod Dentofacial Orthop 1992;102:84-86
  7. Bishara SE, Trulove TS. Comparisons of different de￾bonding techniques for ceramic brackets: an in-vitro study. Part II. Findings and clinical implications. Am J Orthod Dentofacial Orthop 1990;98:263-273
  8. Krell KV, Courey JM, Bishara SE. Orthodontic bracket removal using conventional and ultrasonic debonding techniques, enamel loss, and time requirements. Am J Orthod Dentofacial Orthop 1993;103:258-266
  9. Strobl K, Bahns TL,Willham L, Bishara SE, Stwalley WC. Laser aided debonding of orthodontic ceramic brackets. Am J Orthod Dentofacial Orthop 1992;101:152-158
  10. Mimura H, Deguchi T, Obata A, Yamagishi T, Ito M. Com￾parison of different bonding materials for laser debon￾ding. Am J Orthod Dentofacial Orthop 1995;108:267- 273
  11. Obata A, Tsumura T, Niwa K, Ashizawa Y, Deguchi T, Ito M. Super pulse CO2 laser for bracket bonding and debonding. Eur J Orthod 1999;21:193-198
  12. Ma T, Marangoni RD, Flint W. In vitro comparison of debonding force and intrapulpal temperature chan￾ges during ceramic orthodontic bracket removal using carbon dioxide laser. Am J Orthod Dentofacial Orthop 1997;111:203-210
  13. Theodorakopoulou LP, Sadowsky PL, Jacobson A, La￾cefield W. Evaluation of the debonding characteristics of 2 ceramic brackets: An in vitro study. Am J Orthod Dentofacial Orthop 2004; 125:329-336
  14. Liu JK, Chung CH, Chang CY, Shieh DB. Bond strength and debonding characteristics of a new ceramic brac￾ket. Am J Orthod Dentofacial Orthop 2005; 128:761- 765
  15. Azzeh E, Feldon PJ. Laser debonding of ceramic brac￾kets: A comprehensive review. Am J Orthod Dentofacial Orthop 2003; 123:79-83
  16. Sheridan JJ, Brawley G, Hastings J. Electrothermal debracketing: part I, an