AI Summary & Key Takeaways
AI InsightIn the second experimental group, which considered different slab and beam connection locations for the 11Ø8 anchors, it was concluded that anchor location significantly contributes to energy dissipation capacity, stiffness, and energy load-bearing capacity.
📌 3 Key Takeaways
Abstract
This study aims to determine supplementary details to the existing standards specified in TBDY-2018 (Turkish Building Earthquake Code-2018) regarding anchor diameter and anchor location based on concrete strength for building retrofitting, as well as to propose cost-effective retrofitting standards in terms of cost, labor, time, and material usage. For this purpose, four two-dimensional reinforced concrete frames at a 1/2 scale (150 cm x 150 cm) were prepared and subjected to horizontal and vertical loads. In compliance with TBDY-2018, two of these frames were retrofitted with shear walls using 6Ø12 anchors, while the other two were retrofitted using 11Ø8 anchors. After reaching the collapse level, a total of four experiments were conducted on these frames by applying loads up to 0.95 Pmax. For the first experimental group, despite a 19% reduction in anchor area for the 11Ø8 anchors compared to the 6Ø12 anchors, an increase in energy dissipation capacity and maximum energy load-bearing capacity was observed. In the second experimental group, which considered different slab and beam connection locations for the 11Ø8 anchors, it was concluded that anchor location significantly contributes to energy dissipation capacity, stiffness, and energy load-bearing capacity.
Özet
Bu çalışmada, Türkiye Bina Deprem Yönetmeliği-2018 (TBDY-2018)’e uygun olarak binaların güçlendirilmesine ilişkin kriterlerden beton dayanımına bağlı ankraj çapı ve ankraj lokasyonu konusunda belirtilen standartlara ilave edilebilecek detayların belirlenmesi, güçlendirmenin maliyet, iş gücü, zaman ve malzeme kullanımı açısından ekonomiklik sağlayacak standartlar ortaya koyulması amaçlanmıştır. Yatay ve düşey yüklerin etkisine maruz bırakılmak üzere 1/2 ölçekli, 150 cm x 150 cm ebatlarında iki boyutlu toplam dört adet betonarme çerçeve deney için hazırlanmıştır. TBDY-2018’e uygun olarak bu çerçevelerin iki tanesine 6Ø12 diğer iki tanesine ise 11Ø8 ankraj uygulaması ile perde ilavesi yapılmıştır. Bu dört çerçeve için göçme seviyesine ulaştıktan sonra 0,95 Pmax’a kadar yapılan yüklemeler ile toplam dört adet deney yapılmıştır. İlk deney grubu için 11Ø8 ile yapılan ankrajların 6Ø12 ile yapılan ankraj alanına göre %19 azalmasına rağmen göre enerji tüketim kapasitesi ve maksimum enerji taşıma kapasitesinde artış olduğu görülmüştür. 11Ø8 ile yapılan ankrajların farklı döşeme ve kiriş bağlantı lokasyonları dikkate alınarak tamamlanan diğer deney grubunda ise ankraj lokasyonunun, ankrajların enerji tüketim kapasitesine, rijitliğe ve enerji taşıma kapasitesine katkı sağladığı sonucuna ulaşılmıştır.