Journals / Textile and Apparel / 2026 / Volume: 21 Issue: 4

RESIN EMBEDDING MEDIA AND TECHNIQUES FOR INVESTIGATING 3D STRUCTURE OF WOVEN FABRICS

Banu Özgen Keleş(EGE ÜNİVERSİTESİ)
Pages
—
Publication Date
2011-12-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was observed that successfully microtomed slices of tight sett fabric samples were achieved withultra-low viscosity Epoxy resin.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Thin sectioning and microscopic investigation are widely applied methods in the structural analysis of textile materials.
📊
Key Findings & Data:In this study, several types of resin embedding media and methods were used in order to evaluate thin sectioning as means of determining the internal structure of a woven fabric.
💡
Conclusion & Impact:It was observed that successfully microtomed slices of tight sett fabric samples were achieved withultra-low viscosity Epoxy resin.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Thin sectioning · Resin embedding · Woven fabric structure

Abstract

Thin sectioning and microscopic investigation are widely applied methods in the structural analysis of textile materials. In this study, several types of resin embedding media and methods were used in order to evaluate thin sectioning as means of determining the internal structure of a woven fabric. However, various problems were encountered with these resin types, which resulted in distorted or incomplete sections when the sample blocks were microtomed. Several solutions were introduced in order to overcome these problems occurred during embedding and sectioning processes. It was observed that successfully microtomed slices of tight sett fabric samples were achieved withultra-low viscosity Epoxy resin.

🔖

Cite This Article

Keleş, B. Ö., Gong, H. (2011). RESIN EMBEDDING MEDIA AND TECHNIQUES FOR INVESTIGATING 3D STRUCTURE OF WOVEN FABRICS. Textile and Apparel, Volume: 21 Issue: 4. https://ajindex.com/articles/1640508

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. E.K. Boylston, 1999, ‘Microscopical Evaluation of Yarns’, Textile Chemist and Colorist, 31, 2, 20.
  2. J. D. Fitz Gerald, G. M. Pennock, and G. H. Taylor, 1991, ‘Domain Structure in MP (Mesophase Pitch)-based Fibres’, Carbon, 29, 2, 139.
  3. J. E. Trancik, J. T. Czernuszka, C. Merriman, and C. Viney, 2001, ‘A Simple Method for Orienting Silk and Other Flexible Fibres in Transmission Electron Microscopy Specimens’, Journal of Microscopy, 203, 3, 235.
  4. R. Maticleigh, D. A. Cauthen, 1994, ‘Determining Cotton Fiber Maturity by Image-analysis 1. Direct Measurement of Cotton Fiber Characteristics’, Textile Research Journal, 64, 9, 534.
  5. S. Moamen, 1994, ‘Effect of Weave Parameters on Fabric properties’, MSc Thesis, Textiles, UMIST.
  6. http://www.nyhandweavers.org/tools_sett.htm
  7. http://www.schachtspindle.com/help_common_yarns_sett_chart.htm
  8. M. J. Sherratt, 1992, 'The Pore Structure of Wet Fibre', M.Sc Thesis, UMIST.
  9. D.Chakrabarty, B. Das, S. Roy, 1998, ‘Epoxy Resin – Poly(ethyl methacrylate) Interpenetrating Polymer Networks: Morphology, Mechanical, and Thermal Properties’, Journal of Applied Polymer Science, Vol. 67, 1051.