SavedAdd your journal

Journals / Journal of Marine and Engineering Technology / 2024 / Cilt: 4 Sayı: 2

Review of Phased Array Ultrasonic Testing of Weld Joints

Kaynaklı Birleştirmelerde phased array ultrasonik tekniğinin kullanımı Hakkında Derleme

Hüseyin Uzun(SAKARYA UYGULAMALI BİLİMLER ÜNİVERSİTESİ TEKNOLOJİ FAKÜLTESİ)0000-0003-0137-6141
Desi Gustiani(SAKARYA UYGULAMALI BİLİMLER ÜNİVERSİTESİ TEKNOLOJİ FAKÜLTESİ)0009-0001-5357-0475
Pages
77–92
Publication Date
2024-12-25
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result, it was concluded that phased array ultrasonic testing is a highly efficient technique compared to conventional ultrasonic methods for detecting welding defects.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Welding is a prevalent joining technique used on metals in industrial manufacturing.
📊
Key Findings & Data:Phased Array Ultrasonic Testing (PAUT) is a significant method within the category of ultrasonic non-destructive testing methods because ultrasonic phased arrays offer significant technical advantages over conventional ultrasonic methods such as improved sensitivity, accurate characterization and faster inspection.
💡
Conclusion & Impact:As a result, it was concluded that phased array ultrasonic testing is a highly efficient technique compared to conventional ultrasonic methods for detecting welding defects.
🔬Design:Review & Systematic Survey
📍Scope:Comprehensive Sample
⚙️Variables:Ultrasonik Muayene (UT) · Phased Array Ultrasonik Muayene (PAUT) · Kaynak Kusurlarının Değerlendirilmesi

Abstract

Welding is a prevalent joining technique used on metals in industrial manufacturing. It is very important to detect welding defects that may occur without damaging the welding constructions. The conventional ultrasonic inspection is the most widely used non-destructive test method for the detection of weld defects. Phased Array Ultrasonic Testing (PAUT) is a significant method within the category of ultrasonic non-destructive testing methods because ultrasonic phased arrays offer significant technical advantages over conventional ultrasonic methods such as improved sensitivity, accurate characterization and faster inspection. The aim of this article is to provide a comprehensive review on analysing defects in welded joints by utilizing PAUT. Different studies in the literature related to the non-destructive testing of weld joints by PAUT have been reviewed. Various examples of how the type, depth, and size of welding defects are detected in a highly effective manner have been provided. As a result, it was concluded that phased array ultrasonic testing is a highly efficient technique compared to conventional ultrasonic methods for detecting welding defects.

Özet

Endüstriyel imalatlarda metallerin birleştirilmesi amacıyla en yaygın kullanılan birleştirme tekniği, kaynaktır. Kaynaklı imalatların kaynak bölgelerinde oluşabilecek kaynak kusurlarının, önceden tespit edilmesi en önemli mühendislik süreçlerinden birisidir. Konstrüksiyona zarar vermeden kaynak kusurlarının tespit edilmesi amacıyla en yaygın kullanılan tahribatsız muayene yöntemi ise ultrasonik muayene tekniğidir (UT). Son yıllarda ultrasonik muayene teknikleri arasında hacimsel kaynak kusurlarının tespitinde en yaygın kullanılan tekniklerden birisi de phased array ultrasonik tekniğidir (PAUT). Bu tekniğin geleneksel ultrasonik muayeneye tekniklerine göre tercih edilmesinin başlıca sebepleri şunlardır: Daha ileri seviyede geliştirilmiş kusur tespit hassasiyeti, kusurların daha doğru ve net tespit edilebilmesi, çok daha geniş bir bölgenin daha hızlı bir şekilde muayene taramasının yapılabilmesi. Bu makalenin amacı kaynaklı konstrüksiyonlarda meydana gelebilecek hacimsel kaynak kusurlarının PAUT ile tespiti hakkında kapsamlı bir inceleme yapmaktır. Çeşitli literatür çalışmaları incelenerek, PAUT analizlerinin nasıl yapıldığı ile ilgili bilgi vermektir. Bu tekniğin geleneksel ultrasonik yöntemlere göre kaynak kusur türlerinin tespit edilmesinde, hataların boyutu, şekli ve derinliği ile ilgili bilgilerin elde edilmesinde ne kadar hassas, etkin ve verimli olduğunu göstermektir. Sonuç olarak, kaynak kusurlarının hacimsel tespitinde phased array ultrasonik muayenesinin, geleneksel ultrasonik tekniklere göre çok daha verimli, hızlı ve doğru analiz yapılabilmesi imkânını sağlayan bir teknik olduğu değerlendirilmiştir.

🔖

Cite This Article

Uzun, H., Gustiani, D. (2024). Review of Phased Array Ultrasonic Testing of Weld Joints. Journal of Marine and Engineering Technology, Cilt: 4 Sayı: 2, 77–92. https://doi.org/10.58771/joinmet.1525521

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (48)

  1. Ali, A. J., Jellani, A., Wadood, A., & Hussain, S. W. (2023). Challenges Associated to Uultrasonic Techniques in Characterization of Friction Stir Weld Defects in 27 mm Thick Al 6061-O Plates. Russian Journal of Nondestructive Testing, 59(1), 40–53. https://doi.org/10.1134/S1061830922600678
  2. Arandelovic, M., Sedmak, S., Jovicic, R., Kozak, D., & Dordevic, B. (2021). Numerical simulation of crack growth in a welded joint with defects. Procedia Structural Integrity, 33(C), 850–857. https://doi.org/10.1016/j.prostr.2021.10.095
  3. Arandjelovic, M., Djordjevic, B., Sedmak, S., Radu, D., Petrovic, A., Dikic, S., & Sedmak, A. (2024). Failure analysis of welded joint with multiple defects by extended Finite Element Method and Engineering Critical Analysis. Engineering Failure Analysis, 160. https://doi.org/10.1016/j.engfailanal.2024.108176
  4. Bouzenad, A. E., Yaacoubi, S., Montresor, S., & Bentahar, M. (2022). A model-based approach for in-situ automatic defect detection in welds using ultrasonic phased array. Expert Systems with Applications, 206. https://doi.org/10.1016/j.eswa.2022.117747
  5. Chabot, A., Laroche, N., Carcreff, E., Rauch, M., & Hascoët, J. Y. (2020). Towards defect monitoring for metallic additive manufacturing components using phased array ultrasonic testing. Journal of Intelligent Manufacturing, 31(5), 1191–1201. https://doi.org/10.1007/s10845-019-01505-9
  6. Deepak, J. R., Bupesh Raja, V. K., Srikanth, D., Surendran, H., & Nickolas, M. M. (2021). Non-destructive testing (NDT) techniques for low carbon steel welded joints: A review and experimental study. Materials Today: Proceedings, 44, 3732–3737. https://doi.org/10.1016/j.matpr.2020.11.578
  7. Deepesh, V., Purushothaman, A. V., Muthukumaran, S., & Sastikumar, D. (2019). Application of advanced volumetric non-destructive evaluation methods for the analysis of friction welded tube-to-tube plates using an external tool. Materials Today: Proceedings, 27, 2218–2224. https://doi.org/10.1016/j.matpr.2019.09.100
  8. Drinkwater, B. W., & Wilcox, P. D. (2006). Ultrasonic arrays for non-destructive evaluation: A review. In NDT and E International (Vol. 39, Issue 7, pp. 525–541). https://doi.org/10.1016/j.ndteint.2006.03.006
  9. Duernberger, E., MacLeod, C., Lines, D., Loukas, C., & Vasilev, M. (2022). Adaptive optimisation of multi-aperture ultrasonic phased array imaging for increased inspection speeds of wind turbine blade composite panels. NDT and E International, 132. https://doi.org/10.1016/j.ndteint.2022.102725
  10. Feng, L., & Qian, X. (2020). Enhanced sizing for surface cracks in welded tubular joints using ultrasonic phased array and image processing. NDT and E International, 116. https://doi.org/10.1016/j.ndteint.2020.102334
  11. Fu, Y., Wu, J., Liu, Z., Wang, R., Jiang, B., & Wen, W. (2019). Phased array ultrasonic test of vertical defect on butt-joint weld of CFETR vacuum vessel port stub. Fusion Engineering and Design, 141, 1–8. https://doi.org/10.1016/j.fusengdes.2019.02.010
  12. Gao, C. X., Zhu, W. F., Xiang, Y. X., Zhang, H. Y., Fan, G. P., & Zhang, H. (2024). Ultrasonic Phased Array Imaging for Defects in Angle Blind Spots Based on the Solid Directivity Function. Journal of Nondestructive Evaluation, 43(1). https://doi.org/10.1007/s10921-023-01040-x
  13. Hampson, R., Zhang, D., Gachagan, A., & Dobie, G. (2022). Modelling and characterisation ultrasonic phased array transducers for pipe inspections. International Journal of Pressure Vessels and Piping, 200. https://doi.org/10.1016/j.ijpvp.2022.104808
  14. Haque, S. R. (2023). Investigation on welding defects of alloys using TIG and MIG welding. Hybrid Advances, 3, 100066. https://doi.org/10.1016/j.hybadv.2023.100066
  15. Harara, W., & Altahan, A. (2018). Attempt Towards the Replacement of Radiography with Phased Array Ultrasonic Testing of Steel Plate Welded Joints Performed on Bridges and Other Applications. Russian Journal of Nondestructive Testing, 54(5), 335–344. https://doi.org/10.1134/S1061830918050054
  16. Hu, D., Wang, Q., Xiao, K., & Ma, Y. (2012). Ultrasonic phased array for the circumferential welds safety inspection of urea reactor. Procedia Engineering, 43, 459–463. https://doi.org/10.1016/j.proeng.2012.08.079
  17. Huggett, D. J., Dewan, M. W., Wahab, M. A., Okeil, A., & Liao, T. W. (2017). Phased Array Ultrasonic Testing for Post-Weld and OnLine Detection of Friction Stir Welding Defects. Research in Nondestructive Evaluation, 28(4), 187–210. https://doi.org/10.1080/09349847.2016.1157660
  18. Inês Silva, M., Malitckii, E., Santos, T. G., & Vilaça, P. (2023). Review of conventional and advanced non-destructive testing techniques for detection and characterization of small-scale defects. In Progress in Materials Science (Vol. 138). Elsevier Ltd. https://doi.org/10.1016/j.pmatsci.2023.101155
  19. Javadi, Y., Sweeney, N. E., Mohseni, E., MacLeod, C. N., Lines, D., Vasilev, M., Qiu, Z., Vithanage, R. K. W., Mineo, C., Stratoudaki, T., Pierce, S. G., & Gachagan, A. (2020). In-process calibration of a non-destructive testing system used for in-process inspection of multi-pass welding. Materials and Design, 195. https://doi.org/10.1016/j.matdes.2020.108981
  20. Jayasudha, J. C., & Lalithakumari, S. (2022). Weld defect segmentation and feature extraction from the acquired phased array scan images. Multimedia Tools and Applications, 81(21), 31061–31074. https://doi.org/10.1007/s11042-022-13030-8
  21. Jodhani, J., Handa, A., Gautam, A., Ashwni, & Rana, R. (2023). Ultrasonic non-destructive evaluation of composites: A review. Materials Today: Proceedings, 78, 627–632. https://doi.org/10.1016/j.matpr.2022.12.055
  22. Kumar, S., Menaka, M., Venkatraman, B. (2022). Dual Matrix Array Probe Based Phased Array Ultrasonic Testing for Inspection of Trimetallic Weld Joints.Transactions of the Indian Institute of Metals. Volume 75, pages 1573–1582, (2022)
  23. Kim, Y. H., & Lee, J. R. (2024). Automated data evaluation in phased-array ultrasonic testing based on A-scan and feature training. NDT and E International, 141. https://doi.org/10.1016/j.ndteint.2023.102974
  24. Kong, Y., Bennett, C. J., & Hyde, C. J. (2020). A review of non-destructive testing techniques for the in-situ investigation of fretting fatigue cracks. In Materials and Design (Vol. 196). Elsevier Ltd. https://doi.org/10.1016/j.matdes.2020.109093
  25. Li, W., Zhang, W., Yang, G., & Chen, G. (2024). Application research on ultrasonic phased array detection algorithm for austenitic stainless steel with V-groove weld. Measurement: Journal of the International Measurement Confederation, 226. https://doi.org/10.1016/j.measurement.2024.114169
  26. Li, W., Zhou, Z., & Li, Y. (2019). Inspection of butt welds for complex surface parts using ultrasonic phased array. Ultrasonics, 96, 75–82. https://doi.org/10.1016/j.ultras.2019.02.011
  27. Mandache, C., Levesque, D., Dubourg, L., & Gougeon, P. (2012). Non-destructive detection of lack of penetration defects in friction stir welds. Science and Technology of Welding and Joining, 17(4), 295–303. https://doi.org/10.1179/1362171812Y.0000000007
  28. Ménard, C., Robert, S., Miorelli, R., & Lesselier, D. (2020). Optimization algorithms for ultrasonic array imaging in homogeneous anisotropic steel components with unknown properties. NDT and E International, 116. https://doi.org/10.1016/j.ndteint.2020.102327
  29. Mirmahdi, E., Afshari, D., & Karimi Ivanaki, M. (2023). A Review of Ultrasonic Testing Applications in Spot Welding: Defect Evaluation in Experimental and Simulation Results. In Transactions of the Indian Institute of Metals (Vol. 76, Issue 6, pp. 1381–1392). https://doi.org/10.1007/s12666-022-02738-8
  30. Mirmahdi, E., Khamedi, R., Afshari, D., & Khosravi, M. (2023). Investigating the Effects of Defects and the Effect of Geometric Anisotropy in Stainless Steel Pipes: Phased Array Ultrasonic Test, SH-wave. Journal of Pipeline Science and Engineering, 3(4). https://doi.org/10.1016/j.jpse.2023.100140
  31. Mohseni, E., Javadi, Y., Sweeney, N. E., Lines, D., MacLeod, C. N., Vithanage, R. K. W., Qiu, Z., Vasilev, M., Mineo, C., Lukacs, P., Foster, E., Pierce, S. G., & Gachagan, A. (2021). Model-assisted ultrasonic calibration using intentionally embedded defects for in-process weld inspection. Materials and Design, 198. https://doi.org/10.1016/j.matdes.2020.109330
  32. Nilsson, M., Huttunen-Saarivirta, E., Bohner, E., & Ferreira, M. (2023). Non-destructive evaluation of corrosion in steel liner plates embedded in concrete using nonlinear ultrasonics. Construction and Building Materials, 408. https://doi.org/10.1016/j.conbuildmat.2023.133691
  33. Payão Filho, J. da C., Maia, V. P., Passos, E. K. D., Gonzaga, R. S., & Juliano, D. R. (2022). Probability of detection of discontinuities by ultrasonic phased array inspection of 9% Ni steel joints welded with alloy 625 as the filler metal. Ultrasonics, 119. https://doi.org/10.1016/j.ultras.2021.106582
  34. Provencal, E., & Laperrière, L. (2022). WeldNet: From 3D phased-array ultrasound scans to 3D geometrical models of welds and defects. CIRP Annals, 71(1), 445–448. https://doi.org/10.1016/j.cirp.2022.04.033
  35. Schork, B., Kucharczyk, P., Madia, M., Zerbst, U., Hensel, J., Bernhard, J., Tchuindjang, D., Kaffenberger, M., & Oechsner, M. (2018). The effect of the local and global weld geometry as well as material defects on crack initiation and fatigue strength. Engineering Fracture Mechanics, 198, 103–122. https://doi.org/10.1016/j.engfracmech.2017.07.001
  36. Segovia Ramírez, I., García Márquez, F. P., & Papaelias, M. (2023). Review on additive manufacturing and non-destructive testing. In Journal of Manufacturing Systems (Vol. 66, pp. 260–286). Elsevier B.V. https://doi.org/10.1016/j.jmsy.2022.12.005
  37. Selim, H., Delgado-Prieto, M., Trull, J., Picó, R., Romeral, L., & Cojocaru, C. (2020). Defect reconstruction by non-destructive testing with laser induced ultrasonic detection. Ultrasonics, 101. https://doi.org/10.1016/j.ultras.2019.106000
  38. Singh, J., Mulholland, A. J., Tant, K. M. M., Stratoudaki, T., Curtis, A., Ijomah, W., & Windmill, J. F. C. (2020). Component shape optimisation for enhanced non-destructive testing. Materials and Design, 195. https://doi.org/10.1016/j.matdes.2020.109041
  39. Sumana, & Kumar, A. (2020). Phased array ultrasonic imaging using angle beam virtual source full matrix capture-total focusing method. NDT and E International, 116. https://doi.org/10.1016/j.ndteint.2020.102324
  40. Sweeney, N. E., Parke, S., Lines, D., Loukas, C., Vasilev, M., Pierce, S. G., & MacLeod, C. N. (2023). In-process phased array ultrasonic weld pool monitoring. NDT and E International, 137. https://doi.org/10.1016/j.ndteint.2023.102850
  41. Szávai, S., Bézi, Z., Dudra, J., & Méhész, I. (2016). Modelling of Phased Array Ultrasonic Inspection of a Steam Generator Dissimilar Metal Weld. Procedia Structural Integrity, 2, 1015–1022. https://doi.org/10.1016/j.prostr.2016.06.130
  42. Upadhyay, A., Sherpa, B. B., Kumar, S., Kumar, P. D., Srivastava, N., & Agarwal, A. (2019). Phased Array-Based Ultrasonic Testing of Explosively Welded Aluminium and Stainless Steel Plates. Transactions of the Indian Institute of Metals, 72(6), 1521–1525. https://doi.org/10.1007/s12666-019-01603-5
  43. Xu, N., & Zhou, Z. (2014). Numerical simulation and experiment for inspection of corner-shaped components using ultrasonic phased array. NDT and E International, 63, 28–34. https://doi.org/10.1016/j.ndteint.2014.01.005
  44. Zeng, W., Cai, F. ming, Wang, F., Miao, L., You, F., & Yao, F. (2020). Finite element simulation of laser-generated ultrasonic waves for quantitative detection of internal defects in welds. Optik, 221. https://doi.org/10.1016/j.ijleo.2020.165361
  45. Zhang, B., Wang, X., Cui, J., Wu, J., Wang, X., Li, Y., Li, J., Tan, Y., Chen, X., Wu, W., & Yu, X. (2023). Welding defects classification by weakly supervised semantic segmentation. NDT and E International, 138. https://doi.org/10.1016/j.ndteint.2023.102899
  46. Zhao, Z. (2021). Review of non-destructive testing methods for defect detection of ceramics. In Ceramics International (Vol. 47, Issue 4, pp. 4389–4397). Elsevier Ltd. https://doi.org/10.1016/j.ceramint.2020.10.065
  47. Zhou, H., Han, Z., Du, D., & Chen, Y. (2018). A combined marching and minimizing ray-tracing algorithm developed for ultrasonic array imaging of austenitic welds. NDT and E International, 95, 45–56. https://doi.org/10.1016/j.ndteint.2018.01.008
  48. Zhou, Y. L., Qian, X., Birnie, A., & Zhao, X. L. (2018). A reference free ultrasonic phased array to identify surface cracks in welded steel pipes based on transmissibility. International Journal of Pressure Vessels and Piping, 168, 66–78. https://doi.org/10.1016/j.ijpvp.2018.09.006