Journals / DSİ Teknik Bülteni / 2016 / Sayı: 122

DESİGN PRINCIPLES FOR EXCAVATION TUNNELS BY TUNNEL BORING MACHINE (TBM) AND CONVENTIONAL METHODS

TÜNEL DELME MAKİNESİ VE KONVANSİYONEL YÖNTEM İLE AÇILAN TÜNELLERDE KAPLAMA/SEGMENT TASARIMI

Pages
36–54
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to the results of cost comparison between the conventional method and TBM method, it is decided to tunneling method for Irrigation tunnels (of minimum 3 km length).

📌 3 Key Takeaways

🎯
Objective & Hypothesis:During the excavation of water, sewer and underground tunnels, the selection of the excavation method to prevent damage to environment and above-ground structure is extremely important.
📊
Key Findings & Data:According to the results of cost comparison between the conventional method and TBM method, it is decided to tunneling method for Irrigation tunnels (of minimum 3 km length).
💡
Conclusion & Impact:In this study, an assessment will be made on the basis of design principles for excavation tunnel by tunnel boring machines and conventional methods.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

During the excavation of water, sewer and underground tunnels, the selection of the excavation method to prevent damage to environment and above-ground structure is extremely important. With the technological advances, Tunnel Boring Machines (TBM) also has been used frequently for excavation tunnel besides the conventional (classical) tunneling techniques. According to the results of cost comparison between the conventional method and TBM method, it is decided to tunneling method for Irrigation tunnels (of minimum 3 km length). Although initial investment costs of TBM method are high, TBMs have been started to prefer today in terms of production speed and preventing undesirable problems. TBMs minimize environmental impact and ensure a safer working conditions. Design principles for excavation tunnel by tunnel boring machines and conventional methods are important. In this study, an assessment will be made on the basis of design principles for excavation tunnel by tunnel boring machines and conventional methods.

Özet

Su, kanalizasyon ve metro tünelleri gibi yapıların açılması sırasında, çevreye ve yer üstündeki yapılara zarar verilmemesi için kullanılacak kazı yönteminin seçimi son derece önemlidir. Teknolojik gelişmelerle birlikte konvansiyonel (klasik) tünel açma teknikleri yanında Tünel Delme Makineleri de (TDM) sıklıkla kullanılmaya başlanılmıştır. Sulama tünellerinde (3 km'yi geçen tünellerde) konvansiyonel yöntem ve TDM ile açılan yöntem arasında yapılan maliyet mukayesesi sonucuna göre tünel açma yöntemine karar verilmektedir. Her ne kadar ilk yatırım maliyeti yüksek olsa da TDM'leri, istenilmeyen sorunları engelleme açısından ve imalat hızı nedeniyle günümüzde tercih edilmeye başlanılmıştır. TDM'ler, çevresel etkileri minimuma indirmekte ve daha emniyetli çalışma şartları sağlamaktadır. Tünel delme makinesi ve konvansiyonel yöntem ile açılan tünellerde projelendirme farklılıkları önem arz etmektedir. Bu çalışmada, tünel delme makinesi ve konvansiyonel yöntem ile açılan tünellerde projelendirme esasları üzerine bir değerlendirme yapılacaktır.

🔖

Cite This Article

ALP, M. (2016). DESİGN PRINCIPLES FOR EXCAVATION TUNNELS BY TUNNEL BORING MACHINE (TBM) AND CONVENTIONAL METHODS. DSİ Teknik Bülteni, Sayı: 122, 36–54. https://ajindex.com/articles/152781

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (7)

  1. “Beggs Deformeter Stress Analysis of Single Barrel Conduits", US Deportmant of the Interior Bureau of Reclamation, 1986
  2. Yıldız, K., "Hidroelektrik Santraller Hesap Esasları ve Projelendirilmesi", Ankara, 1992. "DSİ Tünellerin Projelendirilmesi ve İnşası Semineri" Cilt I, Adana, 1986
  3. Doğan, E., "Sulama Tünellerinin Projelendirilmesi", Ankara, 1996
  4. Arıoğlu, E., 2011.
  5. Tünel Ders Notları, Yıldız Teknik Üniversitesi,
  6. İstanbul. "Babakaya Tüneli Segment Raporu", 2013 Terzaghi,K.,“Rock Defects and Loads on Tunnel Supports” "Seismic Design and Analysis of Underground Structures", International Tunnelling Association (ITA), 2001 "Seminer Notları", 2013
  7. Bhawani Singh, Rajnish K. Goel, John A. Hudson Freng, "Tunnelling in Weak Rocks", Elsevıer Geo-Engıneerıng Book Serıes Volume 5, 2006 http://www.herrenknecht.com http://www.selitunnel.com/