SavedAdd your journal

Journals / Ekin Journal of Crop Breeding and Genetics / 2026 / Volume: 12 Issue: 2

Factors Influencing Plant Height in Lentil (Lens culinaris M.) for Mechanical Harvesting

Abdulkadir Aydoğan(Field Crops Central Research Institute, Republic of Türkiye Ministry of Agriculture and Forestry)
Selin Gündüz(Field Crops Central Research Institute, Republic of Türkiye Ministry of Agriculture and Forestry)
Elif Atasayar(Field Crops Central Research Institute, Republic of Türkiye Ministry of Agriculture and Forestry)
Havva Vildan Kilinç(Field Crops Central Research Institute, Republic of Türkiye Ministry of Agriculture and Forestry)
Ersin Kavlak(Field Crops Central Research Institute, Republic of Türkiye Ministry of Agriculture and Forestry)
Yusuf Aydoğan(Ecoseed Seed Industry and Trade Co. Ltd)
Pages
—
Publication Date
2026-08-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Furthermore, plant height was correlated with days to 50% flowering, days to maturity, yield, and first pod height.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The primary goal of agricultural activities is profitability as in every sector.
📊
Key Findings & Data:Profitable crop production is associated with yield and production costs.
💡
Conclusion & Impact:Furthermore, plant height was correlated with days to 50% flowering, days to maturity, yield, and first pod height.
🔬Design:Research Article
📍Scope:2020 Verileri
⚙️Variables:Lentil · plant height · variety

Abstract

The primary goal of agricultural activities is profitability as in every sector. A product that is economically unviable is not adopted by farmers. Profitable crop production is associated with yield and production costs. In legumes, the harvesting method plays a role in determining costs. Morphologically, lentil is relatively short and does not grow upright compared to other plants, especially cereals. This affects the harvesting method and can lead to additional and significant costs. Therefore, the suitability of the lentil plant for mechanical harvesting is more important than for other plants. When varieties unsuitable for mechanical harvesting due to their short height are grown, profitability decreases, and farmers abandon production. The experimental trials were conducted at the İkizce Research and Application Station, affiliated with the Field Crops Research Institute, during the 2020/21 and 2021/22 growing seasons. Seven different varieties were used in the trials during each growing season. Experimental materials were planted as summer and autumn sowings in both years. This study aimed to determine the characteristic(s) that most affect the suitability of the lentil plant for mechanical harvesting and its height in terms of growing season. In the combined analysis, statistically significant differences in plant height were found between year, variety, growing season, year*growing season, and growing season*variety. Furthermore, plant height was correlated with days to 50% flowering, days to maturity, yield, and first pod height.

🔖

Cite This Article

Aydoğan, A., Gündüz, S., Atasayar, E., Kilinç, H. V., Kavlak, E., Aydoğan, Y. (2026). Factors Influencing Plant Height in Lentil (Lens culinaris M.) for Mechanical Harvesting. Ekin Journal of Crop Breeding and Genetics, Volume: 12 Issue: 2. https://ajindex.com/articles/1477715

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (37)

  1. Ahmad, N. S., Moradi, N., Rafaat, J. G., and Mohammed, D. J. (2021). Genetic variability and heritability estimates of agronomic traits in lentil (Lens culinaris Medik.). Romanian Agricultural Research, 38, 1-12.
  2. Andrews, C. J. (1987). Low-temperature stress in field and forage crop production - An overview. Canadian Journal of Plant Science, 67(4), 1121- 1133. https://doi.org/10.4141/cjps87-152
  3. Aydogan, A., Ates, D., Karagul, V., Keçeli, A., Sanal, T., Kaplan Evlice, A., Cinkaya, N., and Yuce, M. (2020). Grain yield, grain weight and protein, Fe, Zn, Se and phytic acid concentrations of lentil under dryland conditions. International Journal of Agriculture and Biological Sciences, 4(6), 8-25.
  4. Aydoğan, A., Karagül, V., and Bozdemir, Ç. (2002). Orta Anadolu Bölgesi kışlık mercimek (Lens culinaris Medik.) ıslah çalışmaları (In Turkish). Tarla Bitkileri Merkez Araştırma Enstitüsü Dergisi, 11(1-2), 1-8. https://izlik.org/JA23LF33UP
  5. Bueckert, R., Zakeri, H., Pritchard, J., and Lafond, G. (2020). First versus last born: Flowers, pods, and yield formation in no-tillage lentil. Crop Science, 60(3), 1634-1647. https://doi.org/10.1002/ csc2.20141
  6. Erskine, W., Rihawi, S., and Capper, B. S. (1990). Variation in lentil straw quality. Animal Feed Science and Technology, 28(1-2), 61-69. https:// doi.org/10.1016/0377-8401(90)90068-J FAO (Food and Agriculture Organization). (2025). World Pulses Day. https://www.fao.org/worldpulses-day/en/ (Accessed: October 3, 2025).
  7. Ghimire, B., Dhakal, S. C., Marahatta, S., and Bastakoti, R. C. (2024). Are lentil (Lens culinaris) farms productive, profitable, and efficient in resource allocation? A cross-sectional study from Nepal. Legume Science, 6(1), e217. https://doi. org/10.1002/leg3.217
  8. Gustafson, D. I. (2017). Greenhouse gas emissions and irrigation water use in the production of pulse crops in the United States. Cogent Food & Agriculture, 3(1), 1334750. https://doi.org/1 0.1080/23311932.2017.1334750
  9. Hakkoymaz, O., and Önder, M. (2021). Kışlık kırmızı mercimek (Lens culinaris Medic.) genotiplerinin fenolojik ve morfolojik özellikleri üzerine ekim zamanlarının etkisi (In Turkish). Journal of Bahri Dagdas Crop Research, 10(2), 155-160. https:// dergipark.org.tr/tr/pub/bdbad
  10. Jawad, M., Malik, S. R., Sarwar, M. A., Asadullah, M., Hussain, I., and Khalid, R. (2019). Genetic analysis of lentil (Lens culinaris) exotic germplasm to identify genotypes suitable for mechanical harvesting. Pakistan Journal of Agricultural Research, 32(1), 152-158. https:// doi.org/10.17582/journal.pjar/2019/32.1.152.158 JMP11. (2014). JSL syntax reference. SAS Institute.
  11. Kang, B. K., Kim, H. T., Choi, M. S., Koo, S. C., Seo, J. H., Kim, H. S., et al. (2017). Genetic and environmental variation of first pod height in soybean [Glycine max (L.) Merr.]. Plant Breeding and Biotechnology, 5(1), 36-44. https://doi. org/10.9787/PBB.2017.5.1.36
  12. Karadaş, K., Bakçı, C., and Kadirhanoğulları, İ. H. (2018). Tarım işletmelerinde mercimek üretim maliyetinin hesaplanması (In Turkish). Journal of Agricultural Faculty of Atatürk University, 49(2), 118-123. https://doi.org/10.17097/ ataunizfd.384604
  13. Irmak, M., and Sözen, Ö. (2024). Kırşehir ekolojik koşullarında bazı yeşil mercimek genotiplerinin tarımsal özelliklerinin belirlenmesi (In Turkish). In V. Saruhan and B. Bayhan (Eds.), Tarımda Güncel Araştırma Konuları II (1st ed., pp. 50). Iksad Publishing House.
  14. Karadavut, U., and Sözen, Ö. (2019). Yerel mercimek genotiplerinin verime etki eden bazı karakterleri için genotipik ve çevresel etkilerin belirlenmesi (In Turkish). Türk Tarım ve Doğa Bilimleri Dergisi, 6(4), 870-877. https://doi.org/10.30910/ turkjans.633623
  15. Khayrallah, W. A. (1979). Mechanization of lentil harvesting. In C. Webb & G. Hawtin (Eds.), Lentils (pp. 131-141). Commonwealth Agricultural Bureaux.
  16. Koç, A., and Akdeniz, H. (2019). Bazı kırmızı mercimek (Lens culinaris Medik.) genotiplerinin, Beyazkule-Ceylanpınar sulu koşullarında verim ve teknolojik özelliklerinin belirlenmesi (In Turkish). Erciyes Tarım ve Hayvan Bilimleri Dergisi, 2(2), 15-20. https://izlik.org/ JA99PY38CX
  17. Kuzbakova, M., Khassanova, G., Oshergina, I., Ten, E., Jatayev, S., Yerzhebayeva, R., Bulatova, K., Khalbayeva, S., Schramm, C., Anderson, P., Sweetman, C., Jenkins, C. L. D., Soole, K. L., and Shavrukov, Y. (2022). Height to first pod: A review of genetic and breeding approaches to improve combine harvesting in legume crops. Frontiers in Plant Science, 13, Article 948099. https://doi.org/10.3389/fpls.2022.948099
  18. Erbaş Köse, Ö. D., Bozoğlu, H., and Mut, Z. (2017). Yozgat koşullarında yetiştirilen yeşil mercimek genotiplerinin verimine ekim sıklığının etkisi (In Turkish). KSÜ Doğa Bilimleri Dergisi, 20(Özel Sayı), 351-355. https://doi.org/10.18016/ ksudobil.349244
  19. MGM (Meteoroloji Genel Müdürlüğü). (2023). Meteoroloji Genel Müdürlüğü. https://mgm.gov. tr/ (Accessed: December 10, 2023).
  20. Malhotra, R. S., Singh, K. B., and Singh, J. K. (1974). Genetic variability and genotype-environmental interaction studies in lentil. Journal of Research, Punjab Agricultural University, 10(1), 17-21. Metcalfe, D. S., Elkins, D. M., and Hughes, H. D. (1980). Crop production: Principles and practices (4th ed.). Macmillan.
  21. Mennad, T., Taklit, A., Houari, A., Khelili, S., and Bedjaoui, A. (2017). Harvesting loss: Solutions for the challenges faced in the production and harvesting of lentil (Lens culinaris) in Algeria. American-Eurasian Journal of Sustainable Agriculture, 11(2), 36-42.
  22. Nannish, N. (2000). Lentil and chickpea production in Jordan. National Centre of Agricultural Research and Technology Transfer (NCARTT). Pannell, D. J., Marshall, G. R., Barr, N., Curtis,
  23. A., Vanclay, F., and Wilkinson, R. (2006). Understanding and promoting adoption of conservation practices by rural landholders. Australian Journal of Experimental Agriculture, 46(11), 1407-1424. https://doi.org/10.1071/ EA05037
  24. Parihar, A. K., Dixit, G. P., Bohra, A., Gupta, D. S., Singh, A. K., Kumar, N., et al. (2020). Genetic advancement in dry pea (Pisum sativum L.): Retrospect and prospect. In S. S. Gosal and S. H. Wani (Eds.), Accelerated plant breeding, volume 3: Food legumes (pp. 283-341). Springer, Cham. https://doi.org/10.1007/978-3-030-47306-8_10
  25. Pratap, A., Das, A., Kumar, S., and Gupta, S. (2021). Current perspectives on introgression breeding in food legumes. Frontiers in Plant Science, 11, Article 589189. https://doi.org/10.3389/ fpls.2020.589189
  26. Sakar, D., Durutan, N., and Meyveci, K. (1988). Factors which limit the productivity of cool season food legumes in Turkey. In R. J. Summerfield (Ed.), World crops: Cool season food legumes (pp. 137- 145). Kluwer Academic Publishers. https://doi. org/10.1007/978-94-009-2764-3_14
  27. Saxena, M. C. (2009). Plant morphology, anatomy and growth habit. In W. Erskine, F. J. Muehlbauer, A. Sarker, & B. Sharma (Eds.), The lentil: Botany, production and uses (pp. 34-46). CABI.
  28. Sáenz-Reyes, J. T., Muñoz-Flores, H. J., Ruíz-Rivas, M., Rueda-Sánchez, A., Castillo-Quiroz, D., and Castillo-Reyes, F. (2022). Diagnosis of lentil cultivation in family production units in Michoacán. Revista Mexicana de Ciencias Agrícolas, 13(27), 23-35. https://doi. org/10.29312/remexca.v13i27.3160
  29. Sidahmed, M. M., and Jaber, N. S. (2004). The design and testing of a cutter and feeder mechanism for the mechanical harvesting of lentils. Biosystems Engineering, 88(3), 295-304. https://doi. org/10.1016/j.biosystemseng.2004.04.002
  30. Silim, S. N., Saxena, M. C., and Erskine, W. (1989). Effect of cutting height on the yield and straw quality of lentil and on a succeeding wheat crop. Field Crops Research, 21(1), 49-58. https://doi. org/10.1016/0378-4290(89)90040-3
  31. Sözen, Ö., and Karadavut, U. (2017). Bazı yeşil mercimek genotiplerinde dane verimi ve verim komponentleri arasındaki ilişkilerin belirlenmesi (In Turkish). Tarla Bitkileri Merkez Araştırma Enstitüsü Dergisi, 26(1), 104-110. https://doi. org/10.21566/tarbitderg.323605
  32. Sözen, Ö., and Karadavut, U. (2017). Determination of the relationship between yield and yield components of winter red lentil genotypes under the conditions of Amik Plain. Türk Tarım ve Doğa Bilimleri Dergisi, 4(4), 468-476. Summerfield, R. J., Roberts, E. H., Erskine, W., and
  33. Ellis, R. H. (1985). Effects of temperature and photoperiod on flowering in lentils (Lens culinaris Medic.). Annals of Botany, 56(5), 659- 671. https://doi.org/10.1093/oxfordjournals.aob. a087055
  34. Tabti, D., Laouar, M., Rajendran, K., Kumar, S., and Abdelguerfi, A. (2018). Analysis of gamma rays induced variability in lentil (Lens culinaris Medik.). Agronomy Research, 16(5), 2169-2178. https://doi.org/10.15159/AR.18.202
  35. Tey, Y. S., and Brindal, M. (2012). Factors influencing the adoption of precision agricultural technologies: A review for policy implications. Precision Agriculture, 13(6), 713-730. https:// doi.org/10.1007/s11119-012-9273-6
  36. Togay, N. (2000). Van koşullarında sıra aralığı ve serpme ekimin mercimek (Lens culinaris Medic) çeşitlerinde verim ve verim öğelerine etkisi (In Turkish). Journal of Agricultural Sciences, 6(4), 125-130. https://doi.org/10.1501/ Tarimbil_0000000989
  37. Tullu, A., Kusmenoglu, I., McPhee, K. E., and Muehlbauer, F. J. (2001). Characterization of core collection of lentil germplasm for phenology, morphology, seed and straw yields. Genetic Resources and Crop Evolution, 48(2), 143–152. https://doi.org/10.1023/A:1011254629628