Journals / International Advanced Researches and Engineering Journal / 2026 / Volume: 10 Issue: 1

Structural testing and finite element analysis of Y25 type bogie frame

Raif Çam(MANISA CELAL BAYAR UNIVERSITY)0009-0001-4352-7289
Saim Kural(MANISA CELAL BAYAR UNIVERSITY)0000-0003-1722-6252
Pages
—
Publication Date
2026-04-20
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

These results demonstrate the accuracy and reliability of the developed finite element model.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the structural behavior of the Y25 type bogie frame, commonly used in freight wagons, was comprehensively investigated using experimental tests and the finite element method (FEM).
📊
Key Findings & Data:The test loads applied to the bogie frame were determined according to the EN 13749 standard, which is valid in the railway industry.
💡
Conclusion & Impact:These results demonstrate the accuracy and reliability of the developed finite element model.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:FEA · Strain Gauge · Y25 Type Bogie

Abstract

In this study, the structural behavior of the Y25 type bogie frame, commonly used in freight wagons, was comprehensively investigated using experimental tests and the finite element method (FEM). The test loads applied to the bogie frame were determined according to the EN 13749 standard, which is valid in the railway industry. In the experimental studies, uniaxial and triaxial (rosette) strain gauges were placed on critical areas of the frame, allowing direct measurement of stress distributions under loading. To validate the experimental results, a detailed finite element model was created in ANSYS Workbench software, and stress-strain calculations were performed under the same loading conditions. Shell elements (SHELL181), which represent frame rigidity, were specifically preferred in the analyses, and boundary conditions were defined to be consistent with the experimental setup. A high degree of agreement was observed when comparing the stress values obtained from experimental measurements with the numerical results. These results demonstrate the accuracy and reliability of the developed finite element model. The study presents important findings regarding the safety and strength performance of the Y25 type bogie frame by combining both experimental and numerical approaches.

🔖

Cite This Article

Çam, R., Kural, S. (2026). Structural testing and finite element analysis of Y25 type bogie frame. International Advanced Researches and Engineering Journal, Volume: 10 Issue: 1. https://doi.org/10.35860/iarej.1793474

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (24)

  1. Baykara, C., The effect of adhesive strength on thin-walled metal surfaces coated with cataphoresis application according to adhesive thickness. 7th International Conference on Structural Adhesive Bonding, Proceedings in Engineering Mechanics. Springer, Cham, 2023: p. 27–39.
  2. Baykara, C., and Atik, E., The effect of surface roughness and carburized depth on wear resistance in 16MnCr5 case hardening steel. Industrial Lubrication and Tribology, 2025. 77(1): p. 81–92.
  3. Baykara, C., Teke, I. T., and Ertas, A. H., Effects of the single-lap joint on fatigue strength of metals with different surface coatings: A numerical simulation. E3S Web of Conferences, 2023. 402(2023), Article ID: 11011.
  4. Bettamin, D., Shabana, A. A., Bosso, N., and Zampieri, N., Frenet force analysis in performance evaluation of railroad vehicle systems. Acta Mechanica, 2021. 232(11): p. 4235–4259.
  5. Dimitriovova, Z., Two-layer model of the railway track: Analysis of the critical velocity and instability of two moving proximate masses. International Journal of Mechanical Sciences, 2022. 217(1), Article ID: 107042.
  6. Dizo, J., Blatnicky, M., Molnar, D., and Falendysh, A., Calculation of basic indicators of running safety on the example of a freight wagon with the Y25 bogie. Communications - Scientific Letters of the University of Zilina, 2022. 24(3): p. B259–266.
  7. Fomin, O., and Lovska, A., Determination of vertical dynamics for a standard Ukrainian boxcar with Y25 bogies. Scientific Bulletin of the National Mining University, 2021. 5: p. 67–72.
  8. Fomin, O., Lovska, A., Pistek, V., and Kucera, P., Determination of the vertical load on the carrying structure of a flat wagon with the 18-100 and Y25 bogies. Applied Sciences, 2021. 11(9), Article ID: 4130.
  9. Hannah, R., Which form of transport has the smallest carbon footprint? Our World in Data, [cited 2024 20 July]; Available from: https://ourworldindata.org/travel-carbon-footprint
  10. Matt, C., Green rail: Is rail better for the environment than trucks?, [cited 2025 10 August]; Available from: https://www.rsilogistics.com/blog/is-rail-better-for-the-environment-than-trucks/
  11. IMARC Group., Global railroad market statistics, outlook and regional analysis 2025–2033. [cited 2025 10 August]; Available from: https://www.imarcgroup.com/railroad-market-statistics
  12. Klimenda, F., Soukup, J., Skocilas, J., and Skocilasova, B., Vertical vibration of the vehicle when crossing over transverse speed bumps. Manufacturing Technology, 2020 20(1):p. 55–59.
  13. Lack, T., and Gerlici, J., Y25 freight car bogie models properties analysis by means of computer simulations. MATEC Web of Conferences, 2018. 157, Article ID: 03014.
  14. Lai, J., Xu, J., Wang, P., Yan, Z., Wang, S., Chen, R., and Sun, J., Numerical investigation of dynamic derailment behavior of railway vehicle when passing through a turnout. Engineering Failure Analysis, 2021. 121, Article ID: 105132.
  15. Pagaimo, J., Magalhaes, H., Costa, J. N., and Ambrosio, J., Derailment study of railway cargo vehicles using a response surface methodology. Vehicle System Dynamics, 2022. 60(1): p. 309–334.
  16. Shvets, A. O., Dynamic interaction of a freight car body and a three-piece bogie during axle load increase. Vehicle System Dynamics, 2021. 60(10): p. 3291–3313.
  17. Wu X, Zhang Z, Cai W, Yang N, Jin X, Wang P, Wen Z, Chi M, Liang S, Huang Y, A critical review of wheel/rail high frequency vibration-induced vibration fatigue of railway bogie in China. Railway Sciences, 2024. 3(2): p. 177–215.
  18. Xiang, Z. Y., Mo, J. L., Ouyang, H., Massi, F., Tang, B., and Zhou, Z. R., Contact behaviour and vibrational response of a high-speed train brake friction block. Tribology International, 2020. 152, Article ID: 106540.
  19. Ye, Y., Sun, Y., Dongfang, S., Shi, D., and Hecht, M., Optimizing wheel profiles and suspensions for railway vehicles operating on specific lines to reduce wheel wear: A case study. Multibody System Dynamics, 2021. 51(1): p. 91–122.
  20. Zhang, Z., Wu, X., Jin, X., Wang, Y., Zhou, J., Chi, M., Wen, Z., Ren, Y., Du, X., Liang, S., Modelling of high frequency vibration of railway bogies’ subcomponent based on structural dynamics: A case study for lifeguard of metro bogie. Engineering Failure Analysis, 2024. 166, Article ID: 108925.
  21. Gürbüz, O., Y 25 tipi Boji gövdesinin Sonlu Elemanlar Yöntemiyle Yapısal Analizleri. Yüksek Lisans Tezi, Sivas Cumhuriyet Üniversitesi Fen Bilimleri Enstitüsü, 2022.
  22. European Committee for Standardization, EN 13749: Railway applications — Wheelsets and bogies — Method of specifying the structural requirements of bogie frames. Brussels: CEN, 2021.
  23. Çetin, M. H., and Alvalı, G. T., Yük Vagonu Bojisi Tasariminda Çok Kriterli Karar Verme Teknikleri ile Malzeme Seçimi. Mühendislik Bilimleri ve Tasarım Dergisi, 2020. 8(1): p. 91-104.
  24. Marmatek, [cited 2024 20 July]; Available from: https://marmatek.com/2020/09/17/strain-gage-secim-kriterleri/