SavedAdd your journal

Journals / Hittite Journal of Science and Engineering / 2026 / Volume: 5 Issue: 1

Rotor Slot Distance Effects on Output Parameters in Single Phase Induction Motors

Merve Sen Kurt(Amasya University, Department of Electric and Electronic Engineering,Amasya, TURKEY)
Ahmet Fenercioğlu(Gaziosmanpaşa University, Department of Mechatronic Engineering,, Tokat, TURKEY)
Pages
—
Publication Date
2018-03-28
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Motor performance is improved as the slot distance decrease

📌 3 Key Takeaways

🎯
Objective & Hypothesis:I n this paper, single phase induction motor which has different rotor slot distances are analyzed with 2-D Finite Element Method FEM .
📊
Key Findings & Data:The single phase induction motor model has 2 poles, 96 W shaft power and run capacitor.
💡
Conclusion & Impact:Motor performance is improved as the slot distance decrease
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Efficiency · Design and optimization · Single phase induction motor

Abstract

I n this paper, single phase induction motor which has different rotor slot distances are analyzed with 2-D Finite Element Method FEM . The analyses are carried out using ANSYS/Maxwell program which solves equations with FEM. The model has same stator and rotor slot geometry. The variable parameter is slot distance which is between outer diameter of rotor core and top border of slot. The single phase induction motor model has 2 poles, 96 W shaft power and run capacitor. It is connected to 220 V, 50 Hz AC network under the full load. Slot distance is varied from 0.2 to 1 mm in 0.1 mm steps. Magnetic model is solved for each distance. Electrical performance characteristics which are speed, efficiency, current, torque and power factor PF are determined. Magnetical flux density B , flux lines and current density on bars are demostrated visually. Motor performance is improved as the slot distance decrease

🔖

Cite This Article

Kurt, M. S., Fenercioğlu, A. (2018). Rotor Slot Distance Effects on Output Parameters in Single Phase Induction Motors. Hittite Journal of Science and Engineering, Volume: 5 Issue: 1. https://doi.org/10.17350/HJSE19030000075

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (7)

  1. Şal S, İmeryüz M, Ergene L. Kafesli asenkron motorlarda maliyet kısıtı altında rotor çubuklarının analizi, EMO Bilimsel Dergi, 2(3), (2012) 23-28.
  2. Boldea I, Nasar SA. The Induction Machine Handbook, second ed. CRC Press, New York, 2002.
  3. Pyrhönen J, Jokinen T. Design of Rotating Electric Machines, second ed. Wiley Press, New Delhi, 2008.
  4. Gürdal O. Elektrik Makinalarının Tasarımı, first ed. Nobel Press, İstanbul, 2006.
  5. Chapman SJ. Elektrik Machinery Fundamentals, fourth ed. McGraw-Hill, New York, 2005.
  6. Fu F, Tang X. Induction Machine Design Handbook, China Machine Press, Beijing, 2001.
  7. Say MG. Performance and Design of AC Machines, third ed. Pitman Publishing, London, 1970. Lipo TA. Introduction to AC machine Design, third ed. Wiley- IEEE Press, Madison, 2004.