SavedAdd your journal

Journals / Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji / 2025 / Cilt: 13 Sayı: 4

Effect of ZrO₂ Reinforcement on Photon Transmittance in Functionally Graded Composite Materials

Fonksiyonel Derecelendirilmiş Kompozit Malzemelerde ZrO₂ Takviyesinin Foton Geçirgenliği Üzerindeki Etkisi

Yaprak Yavuz(GAZİ ÜNİVERSİTESİ)0009-0001-2941-6267
Merve Aydoğan(GAZİ ÜNİVERSİTESİ)0009-0003-6127-1779
Saliha Ceren Haktanıyan(GAZİ ÜNİVERSİTESİ)0009-0007-2337-5656
Berkay Çakır(GAZİ ÜNİVERSİTESİ)0009-0001-5500-9438
Seda Gürgen Avşar(GAZİ ÜNİVERSİTESİ)0009-0008-9991-7236
Zübeyde Özkan(GAZİ ÜNİVERSİTESİ)0000-0003-2901-7749
Uğur Gökmen(GAZİ ÜNİVERSİTESİ)0000-0002-6903-0297
Pages
1551–1558
Publication Date
2025-12-30
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was observed that photons were better absorbed in higher-density ZrO2 layers.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Lead is frequently used as a radiation shielding material; however, it is a toxic material and prolonged exposure can cause serious health problems, including neurological and psychiatric disorders.
📊
Key Findings & Data:In this study, the linear attenuation coefficient (LAC), mass attenuation coefficient (MAC), half value layer (HVL), tenth value layer (TVL), and mean free path (MFP) parameters of the Al 2024 matrix ZrO2 ceramic-reinforced functionally graded composite material (FGCM) were investigated using the Phy-x/PSD program.
💡
Conclusion & Impact:It was observed that photons were better absorbed in higher-density ZrO2 layers.
🔬Design:Araştırma Makalesi
📍Scope:2024 Verileri
⚙️Variables:Al 2024 · ZrO2 · gama zırhlama

Abstract

Lead is frequently used as a radiation shielding material; however, it is a toxic material and prolonged exposure can cause serious health problems, including neurological and psychiatric disorders. Alternative radiation shielding materials to lead are currently being widely researched. In this study, the linear attenuation coefficient (LAC), mass attenuation coefficient (MAC), half value layer (HVL), tenth value layer (TVL), and mean free path (MFP) parameters of the Al 2024 matrix ZrO2 ceramic-reinforced functionally graded composite material (FGCM) were investigated using the Phy-x/PSD program. It was observed that photons were better absorbed in higher-density ZrO2 layers.

Özet

Kurşun, radyasyona karşı zırh malzemesi olarak sıklıkla kullanılmaktadır; ancak toksik bir malzemedir ve uzun süreli maruziyet durumunda nörolojik ve psikiyatrik bozukluklar da dâhil olmak üzere ciddi sağlık sorunlarına neden olabilir. Kurşuna alternatif radyasyon zırh malzemeleri günümüzde yaygın olarak çalışılmaktadır. Bu çalışmada, Al 2024 matrisli ZrO2 seramik takviyeli fonksiyonel derecelendirilmiş kompozit malzemenin (FDKM) doğrusal zayıflama katsayısı (LAC), kütle zayıflama katsayısı (MAC), yarı değer kalınlığı (HVL), onda bir değer kalınlığı (TVL) ve ortalama serbest yol (MFP) parametreleri Phy-x/PSD programı kullanılarak incelenmiştir. Fotonların daha yüksek yoğunluklu ZrO2 katmanlarında daha iyi emildiği gözlemlenmiştir.

🔖

Cite This Article

Yavuz, Y., Aydoğan, M., Haktanıyan, S. C., Çakır, B., Avşar, S. G., Özkan, Z., Gökmen, U. (2025). Effect of ZrO₂ Reinforcement on Photon Transmittance in Functionally Graded Composite Materials. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, Cilt: 13 Sayı: 4, 1551–1558. https://doi.org/10.29109/gujsc.1777281

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (24)

  1. Akinci, A., Akbulut. H., Yilmaz. F. The Effect of the Red Mud on Polymer Crystallization and the Interaction between the Polymer-Filler. Polymer-Plastics Technology and Engineering. 46(1). 31-36. https://doi.org/10.1080/03602550600916258
  2. Bawazeer, O., Makkawi. K., Aga. Z. B., Albakri. H., Assiri. N., Althagafy. K.,Ajlouni. A. W. A review on using nanocomposites as shielding materials against ionizing radiation. Journal of Umm Al-Qura University for Applied Sciences. 9(3). 325-340. https://doi.org/10.1007/s43994-023-00042-9
  3. Safari, A., Rafie. P., Taeb. S., Najafi. M., Mortazavi. S. M. J. Development of lead-free materials for radiation shielding in medical settings: A review. Journal of Biomedical Physics and Engineering. 14(3). 229–244. https://doi.org/10.31661/jbpe.v0i0.2404-1742
  4. Şakar, E., Özpolat. Ö.F., Alım. B., Sayyed. M.I., Kurudirek. M. Phy-X/PSD: development of a user friendly online software for calculation of parameters relevant to radiation shielding and dosimetry. Radiation Physics and Chemistry. 166. 108496. https://doi.org/10.1016/j.radphyschem.2019.108496
  5. Rao, J.B., Rao. D.V., Murthy. I.N.,Bhargava. N. Mechanical properties and corrosion behaviour of fly ash particles reinforced AA 2024 composites. Journal of Composite Materials. 46(12). 1393–1404. https://doi.org/10.1177/0021998311419876
  6. Dey, D., Bhowmik. A., Biswas. A. Wear behavior of stir casted aluminum-titanium diboride (Al2024-TiB₂) composite. Materials Today: Proceedings. 26. 1203–1206. https://doi.org/10.1016/j.matpr.2020.02.242
  7. Kenevisi, M. S., Lin. F. Selective electron beam melting of high strength Al2024 alloy: Microstructural characterization and mechanical properties. Journal of Alloys and Compounds. 843. 155866. https://doi.org/10.1016/j.jallcom.2020.15586
  8. Liu, F., Tu. Y., Wang. Q., Yang. W. Microstructure evolution and mechanical behavior of 2024 aluminum alloy under electric pulse treatment. Journal of Alloys and Compounds. 1010. 177237. https://doi.org/10.1016/j.jallcom.2024.177237
  9. Campbell Jr. F. C. (2011). Manufacturing technology for aerospace structural materials. Elsevier.
  10. George, E., Totten E., MacKenzie D.S. (2003). Handbook of aluminum: Vol. 1: Physical metallurgy and processes (1st ed.). CRC Press. https://doi.org/10.1201/9780203912591
  11. Saleh. B., Jiang. J., Fathi. R., Al-Hababi. T., Xu. Q., Wang. L., Song. D., Ma. A. 30 years of functionally graded materials: An overview of manufacturing methods. applications and future challenges. Composites Part B: Engineering. 201. 108376. https://doi.org/10.1016/j.compositesb.2020.108376
  12. Koizumi, M. The Concept of FGM. Ceram Trans Func Grad Mater. Cilt 34. No 3– 10.1993.
  13. Abenojar J., Velasco. F., Martínez. M. A. Optimization of processing parameters for the Al + 10% B₄C system obtained by mechanical alloying. Journal of Materials Processing Technology. 184(1–3). 441–446. https://doi.org/10.1016/j.jmatprotec.2006.11.122
  14. Fenny, A.S.D., Anand T., & Mayekar N.B. Manufacturing and characterization of mechanical characteristics of stir casting method produced aluminium based metal matrix composite AA6061/ ZrO₂/SiC. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2024.04.002
  15. Youness, R. A., Taha. M.A. Study of mechanical properties and wear behavior of nano-ZrO₂-hardened Al2024 matrix composites prepared by stir cast method. Egyptian Journal of Chemistry. 65(2). 307–313. https://doi.org/10.21608/EJCHEM.2021.85000.4154
  16. Gökmen, U. Fabrication and Characterization of Hot Extruded Hybrid Composites Al 2024 Matrix Reinforced With B4C/Al2O3. Journal of Polytechnic. 2016; 19 (4): 445-453. (DOI): 10.2339/2016.19.4
  17. Wang, H. Shu. J. Huang. H. Zhang. Q. Zhu. T. Laing. X. Sang. S. Li. Y. BN nanosheets and coherent grain boundaries synergistically enhance themechanical and service properties of BN-SiC-ZrO2 composites. Journal of the European Ceramic Society 45 (2025) 117722. https://doi.org/10.1016/j.jeurceramsoc.2025.117722
  18. Erkoyuncu, İ., Maroc, F.Z., Yılmaz, M., Torun, T.R., Özdemir, H.G., Oğul, H., Akman, F. A study on radiation shielding properties, secondary radiation and radiation damage for composites containing glass fiber/PEEK/ gadolinium oxide. Radiation Physics and Chemistry 239 (2026) 113248. https://doi.org/10.1016/j.radphyschem.2025.113248
  19. Nasrabadi, M., Anbaran, H. K., Ebrahimibasabi, E. Experimental study of radiation shielding and mechanical properties of polymer nanocomposite reinforced with CeO2 NPs. Materials Today Communications 48 (2025) 113369. https://doi.org/10.1016/j.mtcomm.2025.113369
  20. Nabil, I.M., Elhameed, S.A., Allam, E.A., Mahmoud, K.A., Shaaban, S.M., Elsad, R.A., Fathy, I.N. Superiority of clay composite materials of bentonite intercalated with the bimetallic MOFs-Pb/Cu, and nano magnetite to enhance the gamma and neutron radiation shielding. Annals of Nuclear Energy 225 (2026) 111762. https://doi.org/10.1016/j.anucene.2025.111762
  21. Dedeepya, G., Mahamuda, Sk., Balaji, V., Echeweozo, E.O., Rao, A.S., Al-Buriahi, M.S., Sm3+ ions doped titanium borate glasses: A study on structural, optical & radiation shielding properties. Nuclear Instruments and Methods in Physics Research B 566 (2025) 165792. https://doi.org/10.1016/j.nimb.2025.165792
  22. Wongwan, W., Yasaka, P., Mutuwong, C., Yonphan, S., Chaiphaksa, W., Cheewasukhanont, W., Sareein, T., Intachai, N., Kothan, S., Kaewkhao, J. Green alternatives of radiation shielding glass using rice husk ash: Dose estimation in human organs. Annals of Nuclear Energy 225 (2026) 111797. https://doi.org/10.1016/j.anucene.2025.111797
  23. Gökmen, U. Fabrication and Characterization of Hot Extruded Hybrid Composites Al 2024 Matrix Reinforced With B4C/Al2O3. Journal of Polytechnic. 2016; 19 (4): 445-453. (DOI): 10.2339/2016.19.4
  24. Wang, H. Shu. J. Huang. H. Zhang. Q. Zhu. T. Laing. X. Sang. S. Li. Y. BN nanosheets and coherent grain boundaries synergistically enhance themechanical and service properties of BN-SiC-ZrO2 composites. Journal of the European Ceramic Society 45 (2025) 117722. https://doi.org/10.1016/j.jeurceramsoc.2025.117722