SavedAdd your journal

Journals / Gazi University Journal of Science Part A: Engineering and Innovation / 2026 / Volume: 11 Issue: 2

Effect of ZrO2 on Radiation Permeability Properties of Polypropylene

Zübeyde Özkan(GAZİ ÜNİVERSİTESİ)0000-0003-2901-7749
Berkay Çakır(GAZİ ÜNİVERSİTESİ)0009-0001-5500-9438
Seda Gürgen Avşar(GAZİ)0009-0008-9991-7236
Emir Olçay(GAZİ ÜNİVERSİTESİ)0009-0009-5257-6929
Uğur Gökmen(GAZİ ÜNİVERSİTESİ)0000-0002-6903-0297
Pages
—
Publication Date
2024-06-29
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The most suitable material for gamma and neutron shielding was found to be 15% ZrO2 reinforced material.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The study investigates the radiation permeability properties including mass attenuation coefficient (MAC), linear attenuation coefficient (LAC), tenth value layer (TVL), half value layer (HVL), fast neutron cross section (FNRC), and mean free path (MFP) of polypropylene (PP) polymer, as well as the produced polymer matrix composites (PP+5% ZrO2, PP+10% ZrO2, PP+15% ZrO2).
📊
Key Findings & Data:According to the radiation permeability results of the studied four materials, PP + 15% ZrO2 was found to have the highest LAC values, while PP was found to have the lowest LAC values.
💡
Conclusion & Impact:The most suitable material for gamma and neutron shielding was found to be 15% ZrO2 reinforced material.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Polypropylene (PP) · ZrO2 · Gamma Shielding

Abstract

The study investigates the radiation permeability properties including mass attenuation coefficient (MAC), linear attenuation coefficient (LAC), tenth value layer (TVL), half value layer (HVL), fast neutron cross section (FNRC), and mean free path (MFP) of polypropylene (PP) polymer, as well as the produced polymer matrix composites (PP+5% ZrO2, PP+10% ZrO2, PP+15% ZrO2). The studied materials were examined by considering their effect on radiation permeability against gamma and neutron radiation. Additionally, powder size, Archimedes principle (density), XRD, DSC, ATR, and DTA-TG analyses were performed. According to the radiation permeability results of the studied four materials, PP + 15% ZrO2 was found to have the highest LAC values, while PP was found to have the lowest LAC values. The FNRC values of the PP, PP+5% ZrO2, PP+10% ZrO2, and PP+15% ZrO2 materials were found to be 10.038 cm-1, 12.651 cm-1, 15.002 cm-1, and 17.091 cm-1, respectively. The most suitable material for gamma and neutron shielding was found to be 15% ZrO2 reinforced material.

🔖

Cite This Article

Özkan, Z., Çakır, B., Avşar, S. G., Olçay, E., Gökmen, U. (2024). Effect of ZrO2 on Radiation Permeability Properties of Polypropylene. Gazi University Journal of Science Part A: Engineering and Innovation, Volume: 11 Issue: 2. https://doi.org/10.54287/gujsa.1475116

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (17)

  1. Akinci, A. & Akbulut, H. & Yilmaz, F. (2007). The Effect of the Red Mud on Polymer Crystallization and the Interaction between the Polymer-Filler. Polymer-Plastics Technology and Engineering, 46(1), 31-36. https://doi.org/10.1080/03602550600916258
  2. Akman, F., Ogul, H., Ozkan, I., Kaçal, M. R., Agar, O., Polat, H., & Dilsiz, K. (2022). Study on gamma radiation attenuation and non-ionizing shielding effectiveness of niobium-reinforced novel polymer composite. Nuclear Engineering and Technology, 54(1), 283-292. https://doi.org/10.1016/j.net.2021.07.006
  3. Aldawood, S., Asemi, N. N., Kassim, H., Aziz, A. A., Saeed, W. S., Al-Odayni, A.-B. (2024). Gamma radiation shielding by titanium alloy reinforced by polymeric composite materials. Journal of Radiation Research and Applied Sciences, 17(1), 100793. https://doi.org/10.1016/j.jrras.2023.100793
  4. Alzahrani, J. S., Lebedev, A. V., Avanesov, S. A., Hammoud, A., Alrowaili, Z. A., Mahmoud, Z. M. M., Olarinoye, I. O., & Al-Buriahi, M. S. (2022). Synthesis and properties of tellurite based glasses containing Na2O, BaO, and TiO2: Raman, UV and neutron/charged particle shielding assessments. Ceramics International, 48(13), 18330-18337. https://doi.org/10.1016/j.ceramint.2022.03.092
  5. Ardiansyah, A., Heryanto, H., Armynah, B., Salah, H., Sulieman, A., Bradley, D. A., & Tahir, D. (2023). Physical, mechanical, optical, and gamma radiation shielding properties of the BaO-based glass system prepared by the melt-quench technique: A review. Radiation Physics and Chemistry, 210, 111059. https://doi.org/10.1016/j.radphyschem.2023.111059
  6. Cho, K., Li, F., & Choi, J. (1999) Crystallization and melting behavior of polypropylene and maleated polypropylene blends. Polymer, 40(7), 1719-1729. https://doi.org/10.1016/S0032-3861(98)00404-2
  7. Kamislioglu, M. (2021). Research on the effects of bismuth borate glass system on nuclear radiation shielding parameters. Results in Physics, 22, 103844. https://doi.org/10.1016/j.rinp.2021.103844
  8. Kavun, Y., Kerli, S., Eskalen, H., & Kavgacı, M. (2022). Characterization and nuclear shielding performance of Sm doped In₂O₃ thin films. Radiation Physics and Chemistry, 194, 110014. https://doi.org/10.1016/j.radphyschem.2022.110014
  9. Kılıçoğlu, O., & Tekin, H. O. (2020). Bioactive glasses with TiO2 additive: Behavior characterization against nuclear radiation and determination of buildup factors. Ceramics International, 46(8-Part A), 10779-10787. https://doi.org/10.1016/j.ceramint.2020.01.088
  10. Krylova, V. & Dukštienė, N. (2013). Synthesis and Characterization of Ag2S Layers Formed on Polypropylene. Journal of Chemistry, 2013(1), 987879. https://doi.org/10.1155/2013/987879
  11. Labour, T., Gauthier, C., Séguéla, R., Vigier, G., Bomal, Y., & Orange, G. (2001) Influence of the β crystalline phase on the mechanical properties of unfilled and CaCO3-filled polypropylene. I. Structural and mechanical characterization. Polymer, 42(16), 7127-7135. https://doi.org/10.1016/S0032-3861(01)00089-1
  12. Malidarre, R. B., Akkurt, İ., & Kavas, T. (2021). Monte Carlo simulation on shielding properties of neutron-gamma from 252Cf source for Alumino-Boro-Silicate glasses. Radiation Physics and Chemistry, 186, 109540. https://doi.org/10.1016/j.radphyschem.2021.109540
  13. Mingliang, G., Demin, J., & Weibing, X. (2007). Study on the Crystallization Properties of Polypropylene/Montmorillonite Composites. Polymer-Plastics Technology and Engineering, 46(10), 985-990. https://doi.org/10.1080/03602550701519449
  14. Papageorgiou, D. G., Bikiaris, D. N., & Chrissafis, K. (2012). Effect of crystalline structure of polypropylene random copolymers on mechanical properties and thermal degradation kinetics. Thermochimica Acta, 543, 288-294. https://doi.org/10.1016/j.tca.2012.06.007
  15. Szondy, B., Bodnár, B., Grossetête, A., Gain, T., & Aszódi, A. (2024). Review of solutions developed for improving maneuvering flexibility in German, French and Russian PWRs targeting to explore future possibilities for the new VVER-1200 nuclear power plant units in Hungary. Nuclear Engineering and Design, 419, 112965. https://doi.org/10.1016/j.nucengdes.2024.112965
  16. Şakar, E., Özpolat, Ö. F., Alım, B., Sayyed, M. I., & Kurudirek, M. (2020). Phy- X / PSD: Development of a user friendly online software for calculation of parameters relevant to radiation shielding and dosimetry. Radiation Physics and Chemistry, 166, 108496. https://doi.org/10.1016/j.radphyschem.2019.108496
  17. Tyagi, G., Singhal, A., Routroy, S., Bhunia, D., & Lahoti, M. (2021). Radiation Shielding Concrete with alternate constituents: An approach to address multiple hazards. Journal of Hazardous Materials, 404(Part B), 124201. https://doi.org/10.1016/j.jhazmat.2020.124201