Journals / Selcuk Journal of Agriculture and Food Sciences / 2024 / Cilt: 38 Sayı: 3

Determination of Physical-Mechanical Properties of Leek Plant (Allium porrum L.)

Deniz Yılmaz(ISPARTA UNIVERSITY OF APPLIED SCIENCES)0000-0003-3326-8890
Mehmet Emin Gökduman(Isparta University of Applied Sciences)0000-0003-0002-8612
Pages
393–402
Publication Date
2024-12-16
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The lowest deformation value has been defined as 25.37±1.18 mm in the experiments performed at 45° knife angle with a serrated knife.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Leek is a vegetable grown towards the end of summer and harvested during fall, found commonly in Asian diet and grown commonly throughout the world.
📊
Key Findings & Data:Conducted with different types of knifes (smooth, serrated) and different shearing angles (30, 45, 60°), shearing force, bio-yield force, rupture force, energy in rupture force, deformation, shearing stress, stress in rupture force, stiffness values have been determined for 3 different sections of leek plant.
💡
Conclusion & Impact:The lowest deformation value has been defined as 25.37±1.18 mm in the experiments performed at 45° knife angle with a serrated knife.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Leek · Mechanization · Physico-mechanical properties

Abstract

Leek is a vegetable grown towards the end of summer and harvested during fall, found commonly in Asian diet and grown commonly throughout the world. Consumed both fresh and dry, mechanical properties of leek plant need to be well-known with regards to the studies related to it’s production, processing, packaging, transport and agricultural mechanization applications. The purpose of this study is to define the physical and mechanical properties of leek plant (Allium porrum L.) used for agricultural purposes in Turkey. Conducted with different types of knifes (smooth, serrated) and different shearing angles (30, 45, 60°), shearing force, bio-yield force, rupture force, energy in rupture force, deformation, shearing stress, stress in rupture force, stiffness values have been determined for 3 different sections of leek plant. Furthermore, colour measurements have been performed for each section of leek plan at 3 different heights. The highest shearing, bioyield force and rupture force values have been defined respectively as 66.27±3.52, 53.02±2.82 and 48.15±33.71 N during the shearing made with a smooth knife. Highest consumed energy value has been defined as 1.10±0.09 J in the studies conducted with smooth knife while the lowest value has been defined as 0.23±0.12 J in the studies carried out with serrated knife. The lowest deformation value has been defined as 25.37±1.18 mm in the experiments performed at 45° knife angle with a serrated knife.

🔖

Cite This Article

Yılmaz, D., Gökduman, M. E. (2024). Determination of Physical-Mechanical Properties of Leek Plant (Allium porrum L.). Selcuk Journal of Agriculture and Food Sciences, Cilt: 38 Sayı: 3, 393–402. https://ajindex.com/articles/1306701

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Abak K, Düzyaman E, Şeniz V, Gülen H, Pekşen A, Kaymak HÇ (2010). Methods and objectives for developing vegetable production. VII. Agriculture Convention, 11-15.
  2. Altunkanat H (2019). The effects of different drying pre-treatments and methods on the physicochemical and sensual properties of leek (Allium porrum L.). PhD Thesis, Tekirdağ Namık Kemal University (unpublished), Türkiye.
  3. Anonym (2013). Leek Cultivation. Horticulture. Ministry of National Education. Ankara
  4. Babayiğit O (2010). Design, production, and testing of an experiment set to determine the drying characteristics of agricultural products. PhD Thesis, Selçuk University (unpublished), Türkiye.
  5. Bernaert N, De Loose M, Van Bockstaele E, Van Droogenbroeck B (2014). Antioxidant changes during domestic food processing of the white shaft and green leaves of leek (Allium ampeloprasum var. porrum). Journal of the Science of Food and Agriculture 94(6): 1168-1174.
  6. Çetin N (2019). The Effects of Drying Conditions on Colour Characteristics in Apple and Orange. European Science and Technology Journal (17): 463-470.
  7. Hsing AW, Chokkalingam AP, Gao YT, Madigan MP, Deng J, Gridley G, Fraumeni Jr. JF (2002). Allium vegetables and risk of prostate cancer: a population-based study. Journal of the National Cancer Institute 94(21): 1648-1651.
  8. Khan MMR, Chen Y, Laguë C, Landry H, Peng Q, Zhong W (2010). Compressive properties of Hemp (Cannabis sativa L.) stalks. Biosystems Engineering 106(3): 315-323.
  9. Kuş ZA. Demir B, Eski I, Gurbuz F, Ercisli S (2017). Estimation of the colour properties of apples varieties using neural network. Erwerbs-Obstbau 59(4): 291-299.
  10. Pekitkan FG, Eliçin AK, Sessiz A (2019). Effects of knives type, cutting angle and loading speed on force and energy requirement of grape cane. Journal of Multidisciplinary Engineering Science and Technology 6(2): 9552-9556.
  11. Shahrajabian MH, Sun W, Cheng Q (2021). A Review of Leek (A. ampeloprasum L.), an important vegetable and food ingredient with remarkable pharmaceutical activities. Pharmacognosy Communications 11(1): 9-12.
  12. Singh V, Das M, Das SK (2016). Effects of knife edge angle and speed on peak force and specific energy when cutting vegetables of diverse texture. International Journal of Food Studies 5(1): 22-38.
  13. TÜİK (2020). Temel İstatistikler. tuik.gov.tr (Accessed on: 17.01.2020)
  14. Yilmaz D, Keskin F, Cihanalp C, Külcü R (2015). Determination of strength properties of leaves of juniper plants at different moisture contents. Small Ruminant Research 64(3): 268-278.
  15. TÜİK (2020). Temel İstatistikler. tuik.gov.tr (Accessed on: 17.01.2020)