Journals / Fırat Üniversitesi Mühendislik Bilimleri Dergisi / 2026 / Cilt: 38 Sayı: 2

Investigation of Flux Barrier Optimization and Linear Sliding Door Applicability in Outer-Rotor Synchronous Reluctance Motors

Dıştan Rotorlu Senkron Relüktans Motorlarda Akı Bariyeri Optimizasyonu ve Lineer Kapı Uygunluğunun İncelenmesi

Şükrü Özdemir(ARTVİN ÇORUH ÜNİVERSİTESİ, BORÇKA ACARLAR MESLEK YÜKSEKOKULU, ELEKTRİK VE ENERJİ BÖLÜMÜ)0000-0002-4771-3783
Mustafa Eker(TOKAT GAZIOSMANPASA UNIVERSITY)0000-0003-1085-0968
Pages
527–540
Publication Date
2026-09-30
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The analyses indicate that the OR-SynRM topology may be a viable candidate for low-power linear sliding door systems and linear doors.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the design of an Outer-Rotor Synchronous Reluctance Motor (OR-SynRM) was carried out for low-power and low-speed applications.
📊
Key Findings & Data:Within the scope of the study, four different rotor flux barrier geometries with two and three barriers (elliptical, triangular, U1, and U2) were considered and optimized.
💡
Conclusion & Impact:The analyses indicate that the OR-SynRM topology may be a viable candidate for low-power linear sliding door systems and linear doors.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:DR-SynRM · MOGA · lineer kapı tahrik

Abstract

In this study, the design of an Outer-Rotor Synchronous Reluctance Motor (OR-SynRM) was carried out for low-power and low-speed applications. Within the scope of the study, four different rotor flux barrier geometries with two and three barriers (elliptical, triangular, U1, and U2) were considered and optimized. The OR-SynRM design was targeted for use in linear sliding door systems; the design criteria were determined based on the power and speed values commonly used in such systems. In the barrier optimization process, average torque and torque ripple criteria were taken into account, and a Multi-Objective Genetic Algorithm (MOGA)-based optimization method was preferred. U-type barrier geometries improve flux distribution and reduce local saturation, leading to a significant reduction in torque ripple. The analyses indicate that the OR-SynRM topology may be a viable candidate for low-power linear sliding door systems and linear doors.

Özet

Bu çalışmada, düşük güç ve düşük hız uygulamaları için bir Dıştan Rotorlu Senkron Relüktans Motoru (OR-SynRM) tasarımı gerçekleştirilmiştir. Çalışma kapsamında, iki ve üç bariyerli olmak üzere dört farklı rotor akı bariyeri geometrisi (eliptik, üçgen, U1 ve U2) ele alınmış ve optimize edilmiştir. OR-SynRM tasarımı, lineer kayar kapı sistemlerinde kullanılmak üzere hedeflenmiş olup, tasarım kriterleri bu tür sistemlerde yaygın olarak kullanılan güç ve hız değerlerine göre belirlenmiştir. Bariyer optimizasyon sürecinde ortalama tork ve tork dalgalanması kriterleri dikkate alınmış ve Çok Amaçlı Genetik Algoritma (MOGA) tabanlı bir optimizasyon yöntemi tercih edilmiştir. Yapılan analizler, U tipi bariyer geometrilerinin akı dağılımını iyileştirdiğini, yerel doyumu azalttığını ve bu sayede tork dalgalanmasını önemli ölçüde düşürdüğünü göstermiştir. Elde edilen sonuçlar, OR-SynRM topolojisinin düşük güçlü lineer kayar kapı sistemleri için uygun ve uygulanabilir bir alternatif olabileceğini ortaya koymaktadır.

🔖

Cite This Article

Özdemir, Ş., Eker, M. (2026). Investigation of Flux Barrier Optimization and Linear Sliding Door Applicability in Outer-Rotor Synchronous Reluctance Motors. Fırat Üniversitesi Mühendislik Bilimleri Dergisi, Cilt: 38 Sayı: 2, 527–540. https://doi.org/10.35234/fumbd.1865759

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (39)

  1. Jurca NF, Inte RA, Popa DC, Vărăţiceanu B, Minciunescu P, Martiş C. Electromagnetic and Mechanical Analysis of a Modular Outer Rotor Synchronous Reluctance Machine for Light Propulsion Vehicles. IEEE Trans Transp Electrific 2021; 7(4): 2795-2808.
  2. Raj MA, Kavitha A. Effect of Rotor Geometry on Peak and Average Torque of External-Rotor Synchronous Reluctance Motor in Comparison With Switched Reluctance Motor for Low-Speed Direct-Drive Domestic Application. IEEE Trans Magn 2017; 53(11): 1-8.
  3. Salehinia SR, Afjei SE, Hekmati A, Aghazadeh H. Design Procedure of an Outer Rotor Synchronous Reluctance Machine for Scooter Application. Int J Eng Trans C Asp 2021; 34(3): 656-666.
  4. Jurca FN, Inte RA, Martis C. Optimal Rotor Design of Novel Outer Rotor Reluctance Synchronous Machine. Electr Eng 2020; 102(4): 2345-2355.
  5. Bonthu SSR, Tarek MTB, Choi S. Optimal Torque Ripple Reduction Technique for Outer Rotor Permanent Magnet Synchronous Reluctance Motors. IEEE Trans Energy Convers 2018; 33(3): 1177-1187.
  6. Hefaz H, Afjei E, Ardestani M. Sensitivity Analysis of Rotor Geometry for External-Rotor Synchronous Reluctance Motor Using Finite Element Method. In: 10th International Power Electronics, Drive Systems and Technologies Conference (PEDSTC); 2019; Shiraz, Iran. pp. 17-22.
  7. Inte RA, Jurca FN. Torque Ripple Reduction of Outer Rotor Synchronous Reluctance Machine with Concentrated Winding. In: International Conference on Electrical Machines (ICEM); 2018; Alexandroupoli, Greece. pp. 247-253.
  8. Inte RA, Jurca FN, Martis C. Performance Analysis of Outer Rotor Synchronous Reluctance Machine With or Without Permanent Magnets for Small Electric Propulsion Applications. In: International Conference and Exposition on Electrical and Power Engineering (EPE); 2019; Iași, Romania. pp. 132-139.
  9. Bonthu SSR, Arafat A, Choi S. Comparisons of Rare-Earth and Rare-Earth-Free External Rotor Permanent Magnet Assisted Synchronous Reluctance Machines. IEEE Trans Ind Electron 2017; 64(12): 9729-9738.
  10. Bonthu SSR, Choi S, Gorgani A, Jang K. Design of Permanent Magnet Assisted Synchronous Reluctance Motor With External Rotor Architecture. In: IEEE International Electric Machines and Drives Conference (IEMDC); 2015; Coeur d’Alene, ID, USA. pp. 220-226.
  11. Inte RA, Jurca FN. A Novel Synchronous Reluctance Motor With Outer Rotor for an Electric Bike. In: International Conference and Exposition on Electrical and Power Engineering (EPE); 2016; Iași, Romania. pp. 213-218.
  12. Inte RA, Jurca FN, Martis C. Performance Analysis of Outer Rotor Synchronous Reluctance Machine With Different Number and Form of Flux Barriers per Pole. In: IEEE International Electric Vehicles Conference (IEVC); 2019. pp. 1-6.
  13. Inte RA, Jurca FN, Martis C. A Study of the Rotor Design Influence on the Power Factor of OR-SynRM. In: International Conference ELEKTRO; 2018; Mikulov, Czech Republic. pp. 225-230.
  14. Raj MA, Kavitha A. Analysis of Outer Rotor Synchronous Reluctance Motor for Low-Speed Applications. IEEE Trans Magn 2017; 53(11): 1-8.
  15. Roohi Sankestani MM, Siadatan A. Design of Outer Rotor Synchronous Reluctance Motor for Scooter Application. In: 10th International Power Electronics, Drive Systems and Technologies Conference (PEDSTC); 2019; Shiraz, Iran. pp. 132-137.
  16. Miller TJE. Brushless Permanent-Magnet and Reluctance Motor Drives. Oxford, UK: Oxford University Press, 1989.
  17. Kamper MJ, van der Merwe FS. Saliency Ratio and Power Factor of Reluctance Synchronous Machines. IEEE Trans Ind Appl 1994; 30(3): 743-751.
  18. Moghaddam RR, Magnussen F, Sadarangani C. Rotor Design Optimization of Synchronous Reluctance Machine for Low Torque Ripple. In: IEEE International Conference on Electrical Machines (ICEM); 2012; Marseille, France. pp. 720-724.
  19. Yammine S, Henaux C, Fadel M, Desharnais S, Callegari L. Flux-Barrier Design of Synchronous Reluctance Machines Based on Flux Line Patterns. In: IEEE International Conference on Electrical Machines (ICEM); 2014; Berlin, Germany. pp. 297-302.
  20. Bianchi N, Bolognani S. Design Techniques for Reducing the Torque Ripple in Synchronous Reluctance Motors. IEEE Trans Ind Appl 2002; 38(5): 1259-1265.
  21. Bianchi N, Bolognani S, Bon D, Dai Prè M. Rotor Flux-Barrier Design for Torque Ripple Reduction in Synchronous Reluctance and PM-Assisted Synchronous Reluctance Motors. IEEE Trans Ind Appl 2009; 45(3): 921-928.
  22. Kamper MJ, Volschenk AF. Effect of Rotor Dimensions and Cross-Magnetization on Ld and Lq Inductances of Reluctance Synchronous Machines. IEE Proc Electr Power Appl 1994; 141(4): 213-220.
  23. Moghaddam RR, Magnussen F, Sadarangani C. Novel Rotor Design Optimization of Synchronous Reluctance Machine for High Torque Density. In: 6th IET International Conference on Power Electronics, Machines and Drives (PEMD); 2012; Bristol, UK. pp. 1-4.
  24. Bozkurt A, Baba AF, Oner Y. Design of Outer-Rotor Permanent-Magnet-Assisted Synchronous Reluctance Motor for Electric Vehicles. Energies 2021; 14(13): 3739.
  25. Lachheb A, Khedhiri J, El Amraoui Ouni L. Control of Linear Switched Reluctance Motor for Sliding Door Application. In: International Conference on Advanced Systems and Electric Technologies (IC_ASET); 2017. pp. 123-128.
  26. Lachheb A, Khedhiri J, El Amraoui Ouni L. Modeling and Performance Analysis of Switched Reluctance Linear Motor for Sliding Door Application. In: 15th International Multi-Conference on Systems, Signals & Devices (SSD); 2018; Hammamet, Tunisia. pp. 1336-1341.
  27. Gaur S. Automatic Door Sliding Control System. JETIR [Internet]. Available: https://www.jetir.org/papers/JETIREY06114.pdf. Accessed: 12 January 2026.
  28. Isik Elektronik. Kormas/Has Motor Automatic Sliding Door Motor (24 V DC, 100 W, Encoder). [Internet]. Available: https://www.isikelektronik.com.tr. Accessed: 12 January 2026.
  29. FAAC. A1400 AIR Sliding Door Automation – Technical Specifications. [Internet]. Available: https://www.faac.biz/products/a1400-air-sliding-door-automation. Accessed: 12 January 2026.
  30. record. record STA 20 Standard Sliding Door – Technical Specifications. [Internet]. Available: https://www.recorddoors.com. Accessed: 12 January 2026.
  31. YIWAN. Automatic Sliding Door Operator System YW-155 – Technical Data. [Internet]. Available: https://www.autoslidingdoors.com. Accessed: 12 January 2026.
  32. TOPP. Automation for Interior Sliding Doors V1 – Technical Features. [Internet]. Available: https://www.topp.it/en/automation-interior-doors-V1/. Accessed: 12 January 2026.
  33. Bozkurt A, Baba AF, Öner Y. Design and Optimization of Outer-Rotor Permanent Magnet Assisted Synchronous Reluctance Motor for Electric Vehicles. Energies 2021; 14(13).
  34. Roohi Sankestani MM, Siadatan A. Design and Performance Analysis of Outer Rotor Synchronous Reluctance Motor for Low-Speed Applications. IEEE Access 2022; 10: 42145-42156.
  35. Afjei SE, Torkaman H, Feyzi MR. Advanced Flux Barrier Design Optimization for Synchronous Reluctance Machines Using Multi-Objective Algorithms. IEEE Trans Magn 2022; 58(2).
  36. Jurca FN, Inte RA, Martis C. Recent Advances in Outer Rotor Reluctance Machines for Direct Drive Applications. IEEE Trans Ind Appl 2023; 59(1): 1152-1161.
  37. Hefaz H, Afjei E, Ardestani M. Multi-Objective Optimization of Rotor Geometry for Torque Ripple Reduction in Synchronous Reluctance Motors. IEEE Access 2023; 11: 104532-104544.
  38. Zhang Y, Zhao J, Wang X. Design Optimization of Synchronous Reluctance Motors Considering Low-Speed High-Torque Applications. IEEE Trans Energy Convers 2024; 39(1): 122-131.
  39. Farshadnia M, Kiyoumarsi A, Uddin MN. Comparative Analysis of Flux Barrier Designs in Synchronous Reluctance Machines for Torque Ripple Minimization. IEEE Trans Ind Electron 2024; 71(2): 1880-1890.