Journals / El-Cezeri / 2017 / Cilt: 4 Sayı: 1

A Comparative Study of Thermal Sprayed AISI 316L Stainless Steel Coatings

Journal
El-Cezeri
Pages
0–0
Publication Date
2017-01-31
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was found that the HVOF sprayed coating showed higher hardness and better wear resistance than the WSF coating.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, austenitic stainless steel (316L) coatings were formed using both Wire Flame Spray Forming (WSF) and High Velocity Oxy Fuel (HVOF) deposition processes after a NiCr bond layer was deposited on low carbon steel substrate.
📊
Key Findings & Data:Corrosion resistance of 316L austenitic stainless steel coatings applied onto low carbon steel via WSF and HVOF spray processes was analyzed by using the potentiodynamic polarization scanning (PDS) technique.
💡
Conclusion & Impact:It was found that the HVOF sprayed coating showed higher hardness and better wear resistance than the WSF coating.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Ostenitik paslanmaz çelik · Korozyon · Yüksek hızlı oksijen yakıt

Abstract

In this study, austenitic stainless steel (316L) coatings were formed using both Wire Flame Spray Forming (WSF) and High Velocity Oxy Fuel (HVOF) deposition processes after a NiCr bond layer was deposited on low carbon steel substrate. The coatings were characterized by light optical microscope (LOM) and microhardness measurements. Corrosion resistance of 316L austenitic stainless steel coatings applied onto low carbon steel via WSF and HVOF spray processes was analyzed by using the potentiodynamic polarization scanning (PDS) technique. The wear behaviour of the coatings against Al 2 O 3 ball was investigated with a reciprocating tester under dry friction conditions. It was found that the HVOF sprayed coating showed higher hardness and better wear resistance than the WSF coating. However, the overall corrosion resistance of the HVOF deposited coating was inferior to that of the WSF coating.

Özet

Bu çalışma kapsamında, düşük kabonlu çelik üzerine NiCr bağlayıcı tabaka uygulandıktan sonra alevle tel püskürtme (WSF) ve yüksek hızlı oksijen yakıt (HVOF) gibi iki farklı termal püskürtme işlemi ile östenitik paslanmaz çelik kaplamalar oluşturulduktan sonra optik mikroskop ve mikrosertlik ölçümleri ile yüzey özellikleri ve performansları karşılaştırılmıştır. 316L paslanmaz çelik kaplamaların korozyon direnci potansiyodinamik polarizasyon tarama (PDS) teknik ile belirlenmiştir. Aşınma deneyleri ise salınım hareketli aşınma test cihazında karşı malzeme olarak Al2O3 bilye kullanılarak kuru ortamda gerçekleştirilmiştir. HVOF püskürtme ile elde edilen 316 L paslanmaz çelik kaplama, alevle te püskürtme yöntemi ile elde edilen 316 L paslanmaz çelik kaplamaya göre daha yüksek sertlik ve aşınma direnci sergilemiştir. Ancak, korozyona karşı alevle tel püskürtme yöntemi ile elde edilen 316 L paslanmaz çelik kaplamanın daha koruyucu olabileceği görülmüştür.

🔖

Cite This Article

Mindivan, H., Samur, R. (2017). A Comparative Study of Thermal Sprayed AISI 316L Stainless Steel Coatings. El-Cezeri, Cilt: 4 Sayı: 1, 0–0. https://doi.org/10.31202/ecjse.289645

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (4)

  1. Huang, P-K., Yeh, J-W., Shun, T-T., Chen, S-K.,“Multi-principal-element alloys with improved oxidation and wear resistance for thermal spray coating”, Advanced Engineering Materials, 2004, 6: 74-78.
  2. Sidhu, T. S., Prakash, S., and Agrawal, R. D., “Studies on the properties of high-velocity oxy–fuel thermal spray coatings for higher temperature applications”, Materials Science, 2005, 41 (6): 805-823.
  3. Uyulgan, B., Dokumaci, E., Celik, E., Kayatekin, I., Ak Azem, N.F., Ozdemir, I.,. Toparli, M., “Wear behaviour of thermal flame sprayed FeCr coatings on plain carbon steel substrate”, Journal of Materials Processing Technology, 2007, 190: 204–210.
  4. Dobler, K., Kreye, H., and Schwetzke, R., “Oxidation of stainless steel in the high velocity oxy-fuel process”, Journal of Thermal Spray Technology, 2000, 9(3): 407-413.