SavedAdd your journal

Journals / Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi / 2017 / Cilt: 23 - Sayı: 1

Manufacturing and characterization of aluminium-magnesium macrocomposite by co-extrusion

Eş kalıp ekstrüzyon yöntemi ile alüminyum-magnezyum makrokompozit imalatı ve karakterizasyonu

Harun Mindivan
Pages
12–14
Publication Date
2017-03-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

This work demonstrated that not only the structural integrity between aluminum alloy and magnesium chips but also the possibility of the solid state recycling of magnesium chips can be provided.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, aluminum-magnesium macrocomposite containing millimetre scale pure magnesium chips reinforcement was fabricated.
📊
Key Findings & Data:The composite was extruded at 400 °C with an extrusion ratio of 9:1.
💡
Conclusion & Impact:This work demonstrated that not only the structural integrity between aluminum alloy and magnesium chips but also the possibility of the solid state recycling of magnesium chips can be provided.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Magnezyum talaşı · Makrokompozit · Eş kalıp ekstrüzyon

Abstract

In this study, aluminum-magnesium macrocomposite containing millimetre scale pure magnesium chips reinforcement was fabricated. The composite was extruded at 400 °C with an extrusion ratio of 9:1. Characterization of the macrocomposites was carried out by microscopic examinations, density and hardness measurements. This work demonstrated that not only the structural integrity between aluminum alloy and magnesium chips but also the possibility of the solid state recycling of magnesium chips can be provided.

Özet

Bu çalışmada, eş kalıp ekstrüzyon yöntemi ile boyutu milimetre aralığında değişen ticari kalitede saf magnezyum talaşını takviye elemanı olarak kullanarak alüminyum/magnezyum makrokompozit üretilmiştir. Kompozit karışımı 400 °C’de 9:1 ekstrüzyon oranında ektrüzyon işlemine tabi tutulmuştur. Makrokompozitin karakterizasyonu mikroyapısal inceleme, yoğunluk ve sertlik ölçümleri ile gerçekleştirilmiştir. Karakterizasyon sonucunda alüminyum alaşımı ve magnezyum talaşı arasında yapısal bütünlüğün sağlandığı ve magnezyum talaşının katı halde geri kazanılabileceği tespit edilmiştir.

🔖

Cite This Article

Mindivan, H. (2017). Manufacturing and characterization of aluminium-magnesium macrocomposite by co-extrusion. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, Cilt: 23 - Sayı: 1, 12–14. https://ajindex.com/articles/42556

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. Mordike BL, Ebert T. “Magnesium: Properties-applications-potential”. Materials Science Engineering: A, 302(1), 37-45, 2001.
  2. Kulekci MK. “Magnesium and its alloys applications in automotive industry”. International Journal of Advanced Manufacturing Technology, 39(9), 851-865, 2008.
  3. Paramsothy M, Srikanth N. Gupta M. “Solidification processed Mg/Al bimetal macrocomposite: microstructure and mechanical properties”. Journal of Alloys and Compounds, 461(1-2), 200-208, 2008.
  4. Paramsothy M, Gupta M, Srikanth N. “Processing, microstructure and properties of a Mg/Al bimetal macrocomposite”. Journal of Composite Materials, 42(24), 2567-2584, 2008.
  5. Paramsothy M, Hassan SF, Srikanth N, Gupta M. “Simultaneously enhanced tensile and compressive response of AZ31-Nano Al2O3-AA5052 macrocomposite”. Journal of Materials Science, 44, 4860-4873, 2009.
  6. Thirumurugan M, Anka Rao S, Kumaran S, Srinivasa Rao T. “Improved ductility in ZM21 magnesium-aluminium macrocomposite produced by co-extrusion”. Journal of Materials Processing Technology, 211(10), 1637-1642, 2011.
  7. Wu Y, Feng B, Xin Y, Hong R, Yu H, Liu Q. “Microstructure and mechanical behavior of a Mg AZ31/Al 7050 laminate composite fabricated by extrusion”. Materials Science and Engineering: A, 640, 454-459, 2015.
  8. Roy S, Kannan G, Suwas S, Surappa MK. “Effect of extrusion ratio on the microstructure, texture and mechanical properties of (Mg/AZ91)M-Sicp composite”. Materials Science and Engineering: A, 624, 279-290, 2015.
  9. Förstera W, Binotsch C, Awiszus B, Dietrich D, Nickel D. “Interface engineering of aluminum-magnesium compounds”. Materials Today: Proceedings, 2(1), 3-8, 2015.