Journals / Wood Industry and Engineering / 2020 / Cilt: 2 Sayı: 2

THE EFFECT OF ACCELERATED WEATHERING ON COLOR AND SURFACE ROUGHENESS IN THERMOWOOD WILD CHERRY WOOD

Pages
70–79
Publication Date
2020-12-25
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

On the other hand, it has been determined that the samples darkening with heat treatment have started to gray on the surfaces with aging, and the degree of graying increases due to the prolongation of the weathering period.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, changes in some physical properties after accelerated weathering of Thermowood Wild Cherry (Cerasus avium (L.) Monench) wood were investigated.
📊
Key Findings & Data:Afterwards, the trial samples prepared were periodically accelerated with 144, 248, 576 and 864 hours of UVB lamps, and color values (L, a, b and ∆E) and average surface roughness (Ra) values were determined at the end of each period.
💡
Conclusion & Impact:On the other hand, it has been determined that the samples darkening with heat treatment have started to gray on the surfaces with aging, and the degree of graying increases due to the prolongation of the weathering period.
🔬Design:Konferans Bildirisi
📍Scope:Comprehensive Sample
⚙️Variables:Wild Cherry · Thermowood · Accelerated Weathering

Abstract

In this study, changes in some physical properties after accelerated weathering of Thermowood Wild Cherry (Cerasus avium (L.) Monench) wood were investigated. Firstly, Wild Cherry (Cerasus avium (L.) Monench) planks were heat treated by Thermowood method and Thermowood Wild Cherry was obtained. Afterwards, the trial samples prepared were periodically accelerated with 144, 248, 576 and 864 hours of UVB lamps, and color values (L, a, b and ∆E) and average surface roughness (Ra) values were determined at the end of each period. The results were analyzed by multiple comparison techniques with SPSS and Duncan test was applied to see if there were p <0.05 statistical differences. The results of the study showed that the average surface roughness values were better in Thermowood samples than the control samples. On the other hand, it has been determined that the samples darkening with heat treatment have started to gray on the surfaces with aging, and the degree of graying increases due to the prolongation of the weathering period.

🔖

Cite This Article

Aytin, A., Korkut, S., Çakıcıer, N., *, A. A. (2020). THE EFFECT OF ACCELERATED WEATHERING ON COLOR AND SURFACE ROUGHENESS IN THERMOWOOD WILD CHERRY WOOD. Wood Industry and Engineering, Cilt: 2 Sayı: 2, 70–79. https://ajindex.com/articles/1237246

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Johansson D., Strenght and colour response of solid wood to heat treatment, Licentiate Thesis, Luleå Technology University, Department of Skellefteå Campus, Sweden, (2005). TS CEN/TS 15679, Heat treated timber-terms and characteristics, Turkish Standards Institute, Ankara, (2010).