SavedAdd your journal

Journals / Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi / 2026 / Cilt: 18 Sayı: 1

RECRYSTALLIZATION KINETIC OF Fe-5.23%V AND Fe-15%V ALLOYS

Fe-%5,23v Ve Fe-%15v Alaşımlarının Yeniden Kristalleşme Kinetiği

Bülent Bostan
A.tamer Özdemir
Pages
101–108
Publication Date
2013-03-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was found that the rate of recrystallization obeyed an Avrami type equation in which time exponent was temperature independent.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this work, binary alloys of Fe-5,23%V and Fe-15%V were first cold rolled by 50% and then annealed in an oxygen-free set-up at 560, 570, 580 and 590°C, respectively.
📊
Key Findings & Data:It was found that the rate of recrystallization obeyed an Avrami type equation in which time exponent was temperature independent.
💡
Conclusion & Impact:It was concluded that increase in vanadium content accelerated the rate of transformation where on the contrary did not influenced the general trend of the hardness variation.
🔬Design:Araştırma Makalesi
📍Scope:Comprehensive Sample
⚙️Variables:Yeniden kristalleşme · kinetik · Fe-V alaşımı

Abstract

In this work, binary alloys of Fe-5,23%V and Fe-15%V were first cold rolled by 50% and then annealed in an oxygen-free set-up at 560, 570, 580 and 590°C, respectively. It was found that the rate of recrystallization obeyed an Avrami type equation in which time exponent was temperature independent. It was concluded that increase in vanadium content accelerated the rate of transformation where on the contrary did not influenced the general trend of the hardness variation.

Özet

Bu çalışmada, %50 soğuk deforme edilmiş Fe-%5,23 V ve Fe-%15 V alaşımları oksijensiz ortamda 560, 570, 580 ve 590°C’lerde tavlanmış ve alaşımların yeniden kristalleşme kinetiği araştırılmıştır. Kinetiğin Avrami denklemine uyduğu ve zaman üstü katsayının sabit değerler aldığı tespit edilmiştir. Vanadyum miktarındaki artışın yeniden kristalleşme hızını artırdığı, buna karşın sertlik değişiminde fazla etkin olmadığı gözlenmiştir.

🔖

Cite This Article

Bostan, B., Özdemir, A. (2013). RECRYSTALLIZATION KINETIC OF Fe-5.23%V AND Fe-15%V ALLOYS. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, Cilt: 18 Sayı: 1, 101–108. https://ajindex.com/articles/1079190

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (24)

  1. Gladman., T., Mcivor., I.D. and Dulieu., D., in Proceedings of the
  2. International Conference on Microalloying 75, Washington, USA, 32,
  3. October 1975.
  4. Aronsson., D., in “Climax Molybdenum Symposium on Steel str.
  5. Mechanisms”, Zurich, Switzerland, 77, 1969.
  6. C. Garcia-Mateo, J.L. Romero, J.M. Rodriguez-Ibabe, Warm Forging of a
  7. Vanadium Microalloyed Steel Proceedings of the 41st Mechanical Working
  8. and Steel Processing Conference, vol. 37, Warrendale, PA, USA, 1999, pp.
  9. Vanadium Microalloyed Steel Materials Science Forum 284–286 (1998) 435–
  10. Christian, J.W., The Theory of the Transformations in Metals. Pergaman
  11. Press, New York, 1970.
  12. Verhoeven., J.D., Fundamentals of Physical Metallurgy, John Wiley U.S.A,
  13. Chan., R.W., Physical Metallurgy, North Holland, Amsterdam.
  14. Özdemir., A. T. High Temperature Annealing of Cold Worked and Nitrided
  15. %V-Fe Alloy M.E.T.Ü. Master Thesis, 1984.
  16. Özdemir., A.T., Atasoy., Ö.E., Microstructural Changes on High
  17. Temperature Treatment of a Cold-Worked and Nitrided Fe-1%V Alloy
  18. Journal of Materials Science, 33, 2683-2690, 1998.
  19. Recrystallization, Grain Growth and Texture, ASM, City., 1966.
  20. Bostan B. Fe-%5,23V Alaşımında Yeniden Kristalleşme Kinetiği G.Ü. Fen
  21. Bilimleri Enstitüsü Yüksek Lisans Tezi 1999 Ankara.
  22. Bostan B., Özdemir, A.T., Farklı Deformasyon Oranlarında Fe-%5,23V
  23. Alaşımının Yeniden Kristalleşme Kinetiği Politeknik Dergisi Özel sayı 15-19
  24. Ankara.