Dergiler / Türkiye Ormancılık Dergisi / 2023 / Cilt: 24 Sayı: 2

Sürdürülebilir ahşap koruma için nanoteknoloji potansiyelinin araştırılması

Exploring the potential of nanotechnology for sustainable wood preservation

Sayfa
122–133
Yayın Tarihi
2023-06-28
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Genel olarak, W-SnO2-TEOS numunesi en yüksek su direncini sergilerken, W-ZnO-TEOS numunesi yangın koruması açısından en etkili olduğu belirlenmiştir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Ahşabın korunması, ahşap ürünlerin yapısal ve estetik özelliklerinin muhafaza edilmesinde büyük öneme sahiptir.
📊
Temel Bulgular & Veri:Geleneksel yöntemler arasında kimyasal işlemler, koruyucular ve kaplamalar yer alsa da, çevresel ve sağlık açısından olumsuz etkileri nedeniyle sürdürülebilir alternatiflere ihtiyaç duyulmaktadır.
💡
Sonuç & Katkı:Genel olarak, W-SnO2-TEOS numunesi en yüksek su direncini sergilerken, W-ZnO-TEOS numunesi yangın koruması açısından en etkili olduğu belirlenmiştir.
🔬Tür:Uygulamalı Anket & Alan Araştırması
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Nanopartiküller · Nanoteknoloji · Sürdürülebilirlik

Özet

Ahşabın korunması, ahşap ürünlerin yapısal ve estetik özelliklerinin muhafaza edilmesinde büyük öneme sahiptir. Geleneksel yöntemler arasında kimyasal işlemler, koruyucular ve kaplamalar yer alsa da, çevresel ve sağlık açısından olumsuz etkileri nedeniyle sürdürülebilir alternatiflere ihtiyaç duyulmaktadır. Nanomalzemelerin kullanımı, ahşap koruması için yeni potansiyeller sunmaktadır. Bu çalışmada, lignoselülozik malzemelere emprenye yöntemiyle nanopartiküller uygulanarak masif ahşabın su ve yangın direnci artırılmıştır ve bu işlem için ek enerji gerekmeksizin gerçekleştirilmiştir. Bu çalışmanın amacı, büyük ölçekli üretim için daha maliyet-etkin ve enerji tasarruflu bir yaklaşım belirlemek ve ahşap endüstrisinde yeni ve rekabetçi malzemeler sunmaktır. Yüzey modifikasyonu ve karakterizasyon çalışmaları, SEM-EDX ve Optik Profilometre analizleri, termal mukavemet için TGA-DTA analizi, su direnci için % su alım testi ve renk değişim parametrelerini belirlemek için PCE-CSM 10 spektrofotometre kullanılarak gerçekleştirilmiştir. Çinko oksit (ZnO), Kitosan (Ch) ve kalay dioksit (SnO2) nanopartikülleri ile işlevselleştirilmiş ahşap yüzeyler, sırasıyla %64.0 %71.0 ve %73.0 su alma değerleri sergilemiştir. TEOS ile silanizasyon işlemi sonrasında ise su alma değerleri ilgili yüzeyler için %58.0 %59.0 ve %60.0 olarak belirlenmiştir. TGA ve DTA sonuçlarına göre, W-ZnO-TEOS numunesi en yüksek kütle korumasını göstermiş ve 340-375°C'de %62.1 (5.717 mg), 381-439°C'de ise %14.4 (1.328 mg) ağırlık kaybı yaşanmıştır. Bunu takiben, W-SnO2-TEOS numunesi 301-353°C'de %46.3 (7,050 mg) ve 431-469°C'de %15.4 (2.345 mg) ağırlık kaybı sergilemiştir. W-Ch-TEOS numunesi ise 342-365°C'de %66.4 (8.242 mg) ve 448-476°C'de %18.8 (2.335 mg) ağırlık kaybı göstermiştir. Genel olarak, W-SnO2-TEOS numunesi en yüksek su direncini sergilerken, W-ZnO-TEOS numunesi yangın koruması açısından en etkili olduğu belirlenmiştir.

Abstract

Wood preservation plays a vital role in maintaining wood products' structural and aesthetic properties. Traditional methods, including chemical treatments, preservatives, and coatings, have been utilized for wood protection, but sustainable alternatives are sought due to their negative environmental and health impacts. The utilization of nanomaterials presents a promising avenue for wood protection. In this study, nanoparticles were applied to lignocellulosic materials using the impregnation method to enhance solid wood’s water and fire resistance without needing additional energy. This research aimed to identify a cost-effective and energy-efficient approach for large-scale wood production while introducing innovative and competitive materials in the wood industry. Surface modification and characterization analyses, including SEM-EDX and Optical Profilometer studies, TGA-DTA analysis for thermal strength assessment, % water uptake test for water resistance evaluation, and PCE-CSM 10 spectrophotometer measurements to determine color change parameters, were conducted. Functionalized wood surfaces treated with zinc oxide (ZnO), chitosan (Ch), and tin dioxide (SnO2) nanoparticles exhibited water uptake values of 64%, 71%, and 73%, respectively. Following the salinization process using TEOS, the water uptake values decreased to 58%, 59%, and 60% for the respective surfaces. Based on the TGA and DTA results, the W-ZnO-TEOS sample demonstrated superior mass protection, with a significant weight loss of 62.1% (5.717 mg) at 340-375°C and 14.4% (1.328 mg) at 381-439°C. This was followed by the W-SnO2-TEOS sample, which exhibited a weight loss of 46.3% (7.050 mg) at 301-353°C and 15.4% (2.345 mg) at 431-469°C. The W-Ch-TEOS sample displayed a weight loss of 66.4% (8.242 mg) at 342-365°C and 18.8% (2.335 mg) at 448-476°C. Overall, the W-SnO2-TEOS sample demonstrated the highest water resistance, while the W-ZnO-TEOS sample exhibited the most effective fire protection capabilities.

🔖

Bu Makaleye Atıf Yap

RAMAZANOĞLU, D., ÖZDEMİR, F. (2023). Sürdürülebilir ahşap koruma için nanoteknoloji potansiyelinin araştırılması. Türkiye Ormancılık Dergisi, Cilt: 24 Sayı: 2, 122–133. https://ajindex.com/articles/964825

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (13)

  1. Alfredsen, G., Eikenes, M., Solheim, H., Militz, H., 2004. Screening of chitosan against wood-deteriorating fungi. Scand. J. Forest Res., 19(5): 4-13. ASTM-D2244-21, 2021. Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates. Annual Book of ASTM Standarts, USA. Aversa, M., Van Der Voort, A.J., De Heij, W., Tournois, B., Curcio, S., 2011. An Experimental Analysis of Acoustic Drying of Carrots: Evaluation of Heat Transfer Coefficients in Different Drying Conditions. Drying Technology, 29(2): 239-244.
  2. Bantle, M.; Eikevik, T.M., 2011. Parametric Study of High-Intensity Ultrasound in The Atmospheric Freeze Drying of Peas. Drying Technology, 29(10): 1230-1239.
  3. Bulian, F., Graystone J. A., 2009. Industrial Wood Coatings. Theory and Practice, First Edition,
  4. Elsevier, Amsterdam, pp. 135. Carcel, J. A., Garcia-Perez, J.V., Riera, E., Mulet, A., 2011. Improvement of Convective Drying of Carrot by Applying Power Ultrasound Influence of Mass Load Density. Drying Technology, 29(2): 174-182.
  5. Chirkova, J., Andersone, I., Irbe, I., Spince, B., Andersons, B., 2011. Lignins as agents for bio-protection of wood. Holzforschung 65(4): 497-502.
  6. Clausen, P.A. Helle, M., Kärki, P., 2004. Environmental aspects of wood protection and preservation. Environmental Pollution, 128 (1):57-64.
  7. Croitoru, C., Patachia, S., Lunguleasa, A., 2015. A mild method of wood impregnation with biopolymers and resins using 1-ethyl-3-methylimidazolium chloride as carrier. Chem. Eng. Res. Des., 93, 257-268.
  8. De la Fuente-Blanco, S., De Sarabia, E. R. F., Acosta-Aparicio, V. M., Blanco-Blanco, A., Gallego-Juarez, J.A., 2006. Food Drying Process by Power Ultrasound. Ultrasonics, 4(4): 523-527.
  9. Duan, X., Zhang, M., Li, X., Mujumdar, A.S., 2008. Ultrasonically Enhanced Osmotic Pretreatment of Sea Cucumber Prior to Microwave Freeze Drying. Drying Technology, 26(4): 420-426.
  10. Eikenes, M., Alfredsen, G., Christensen, B., Militz, H., Solheim, H., 2005. Comparison of chitosan with different molecular weights as possible wood preservatives. J. Wood Sci., 51(4): 387-394.
  11. El-Gamal, R., Nikolaivits, E., Zervakis, G.I., Abdel-Maksoud, G., Topakas, E., Christakopoulos, P., 2016. The use of chitosan in protecting wood artifacts from damage by mold fungi. Electron. J. Biotechnol., 24, 70-78.
  12. Fan, L. Hu, Z. Wang., J. Chen., 2014. Enhancement of woo properties by multifunctional coatings, Progress in Organic Coatings, 77(8):1734-1742.
  13. Fan, Y. Hu, L., Chen,