Dergiler / Konya Journal of Engineering Sciences / 2023 / Cilt: 11 Sayı: 3

IMPROVEMENT OF HEAT AFFECTED ZONE OF GTAWed 5754 ALUMINUM ALLOY WITH FSP

Sayfa
758–769
Yayın Tarihi
2023-09-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

In addition, the high hardness values of HAZ of the GTAWed samples were reduced to the base material hardness values in all FSPed samples, resulting in a more homogeneous hardness distribution.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In this study, post-weld friction stir processing (FSP) was applied to eliminate the grain coarsening disadvantages encountered in the heat-affected zone when joining AA5754 aluminum alloy with Gas Tungsten Arc Welding (GTAW).
📊
Temel Bulgular & Veri:Significant amounts of grain refinement were detected as a result of the FSP applied to the regions with grain coarsening.
💡
Sonuç & Katkı:In addition, the high hardness values of HAZ of the GTAWed samples were reduced to the base material hardness values in all FSPed samples, resulting in a more homogeneous hardness distribution.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:AA5754 · Gas Tungsten Arc Welding · Friction Stir Processing

Abstract

In this study, post-weld friction stir processing (FSP) was applied to eliminate the grain coarsening disadvantages encountered in the heat-affected zone when joining AA5754 aluminum alloy with Gas Tungsten Arc Welding (GTAW). As a result of welding in two passes and with the low heat input by selecting the appropriate welding parameters, all welding seams were produced without macro defects. Despite all these precautions, grain coarsening has occurred in the Heat Affected Zone (HAZ), as expected. Significant amounts of grain refinement were detected as a result of the FSP applied to the regions with grain coarsening. Consequently, the grain refinement in the HAZ, the tensile strength increased slightly, in contrast with ductility has significantly increased (around from 6% to 19%). In the tensile tests, the rupture occurred in the HAZ in the GTAWed specimens, while the rupture occurred in the base material close to the HAZ in all FSPed specimens. In addition, the high hardness values of HAZ of the GTAWed samples were reduced to the base material hardness values in all FSPed samples, resulting in a more homogeneous hardness distribution.

🔖

Bu Makaleye Atıf Yap

KAHRAMAN, F., GENÇER, G. M., YOLCU, C. (2023). IMPROVEMENT OF HEAT AFFECTED ZONE OF GTAWed 5754 ALUMINUM ALLOY WITH FSP. Konya Journal of Engineering Sciences, Cilt: 11 Sayı: 3, 758–769. https://ajindex.com/articles/964594

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (11)

  1. M. R. Islam, M. Ishak, L. H. Shah, S. R. A. Idris, C. Meriç, “Dissimilar welding of A7075-T651 and AZ31B alloys by gas metal arc plug welding method,” The International Journal of Advanced Manufacturing Technology, vol. 88, June, pp. 2773-2783, 2017.
  2. H. Okuyucu, A. Kurt, E. Arcaklioglu, “Artificial neural network application to the friction stir welding of aluminum plates,” Materials & Design, vol. 28, no. 1, Aug., pp. 78-84, 2007.
  3. P. Bamberg, G. Gintrowski, Z. Liang, A. Schiebahn, U. Reisgen, N. Precoma, C. Geffers, “Development of a new approach to resistance spot weld AW-7075 aluminum alloys for structural applications: an experimental study–Part 1,” Journal of Materials Research and Technology, vol. 15, Nov. Dec., pp. 5569-5581, 2021.
  4. N. Karunakaran, V. Balasubramanian, “Effect of pulsed current on temperature distribution, weld bead profiles and characteristics of gas tungsten arc welded aluminum alloy joints,” Transactions of Nonferrous Metals Society of China, vol. 21, no. 2, Feb., pp. 278-286, 2011.
  5. P. Praveen, P. K. D. V. Yarlagadda, “Meeting challenges in welding of aluminum alloys through pulse gas metal arc welding,” Journal of Materials Processing Technology, vol. 164-165, May, pp. 1106-1112, 2005.
  6. P. Kah, R. Rajan, J. Martikainen, R. Suoranta, “Investigation of weld defects in friction-stir welding and fusion welding of aluminium alloys,” International Journal of Mechanical and Materials Engineering, vol. 10, no. 1, Dec., pp. 1-10, 2015
  7. C. Zhao, Z. Luo, Y. Li, M. Feng, W. Xuan, “Inverse heat conduction model for the resistance spot welding of aluminum alloy,” Numerical Heat Transfer, Part A: Applications, vol. 70, no. 12, Nov., pp. 1330-1344, 2016.
  8. R. Xiao, X. Zhang, “Problems and issues in laser beam welding of aluminum–lithium alloys,” Journal of Manufacturing Processes, vol. 16, no. 2, April, pp. 166-175, 2014.
  9. R. Xiao, J. Yang, C. Tan, Z. Shen, Z. Yu, “Fabrication of high strength and lightweight dissimilar material joints by laser: a review,” Advanced Laser Processing and Manufacturing III, vol. 11183, Nov., pp. 32-37, 2019.
  10. A. Yazdipour, K. Dehghani, “Modeling the microstructural evolution and effect of cooling rate on the nanograins formed during the friction stir processing of Al5083,” Materials Science and Engineering: A, vol. 527, no. 1-2, Dec., pp. 192-197, 2009.
  11. A. K. Bodukuri, K. Eswaraiah, K. Rajendar, “Comparison of Aluminum Alloy 5083 properties on TIGW and FSW Processes,” Materials Today: Proceedings, vol. 4, no. 9, Oct., pp.