Dergiler / Textile and Apparel / 2012 / Cilt: 22 Sayı: 2

INFLUENCE OF INK LAYERS ON THE QUALITY OF INK JET PRINTED TEXTILE MATERIALS

Sayfa
115–124
Yayın Tarihi
2012-06-29
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

This research offers insight in the influence of one parameter in textile materials printing process on longevity of flag products, which can also be applied to any other product printed on polyester material.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:This paper will discuss research concerning the influence of the number of ink layers deposited by ink jet for textile printing.
📊
Temel Bulgular & Veri:It can be concluded that increase of printed ink layers will lead to a better quality of final product in terms of resistance to various environment influences.
💡
Sonuç & Katkı:This research offers insight in the influence of one parameter in textile materials printing process on longevity of flag products, which can also be applied to any other product printed on polyester material.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Polyester · Ink jet printing · Colourfastness

Abstract

This paper will discuss research concerning the influence of the number of ink layers deposited by ink jet for textile printing. With the aim to establish the optimal number of layers as to achieve good quality prints, it discusses the good colourfastness during longer time period and exposure to different environmental factors including temperature, light etc. Three typical materials with the same raw material compositions, but different fabric weight and thread count were chosen and printed with digital ink jet technology. Materials were printed with variations in the ink layers number and the correlation between K/S factor and number of applied ink layers was determined after the printing process. Upon finished printing process, the samples were treated with heat, light and other simulated environmental influences in line with the appropriate international standards. The changes were detected by common visual ranking methods (gray scale and blue wool reference scale) as well the spectrophotometric measurements for obtaining spectral data of the colourfastness and staining, what was followed by additional testing of the heating element with thermo vision camera. Microscopic view of the changes on the printed surfaces upon exposing them to different simulated factors was obtained by SEM microscope. It can be concluded that increase of printed ink layers will lead to a better quality of final product in terms of resistance to various environment influences. This research offers insight in the influence of one parameter in textile materials printing process on longevity of flag products, which can also be applied to any other product printed on polyester material.

🔖

Bu Makaleye Atıf Yap

KAŠIKOVIĆ, N., NOVAKOVIĆ, D., KARLOVIĆ, İ., VLADIĆ, G. (2012). INFLUENCE OF INK LAYERS ON THE QUALITY OF INK JET PRINTED TEXTILE MATERIALS. Textile and Apparel, Cilt: 22 Sayı: 2, 115–124. https://ajindex.com/articles/943803

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (13)

  1. Novaković D, Kašiković N, Vladić G, 2010, “Integrating Internet application in to the workflow for customization of textile products”, International Joint Conference on Environment and Light Industry Technologies, Budapest, Hungary, pp.: 471 – 476
  2. Owen P, 2003, “Digital printing: A world of opportunity from design to production”, AATCC Review, 3 (9), pp.: 10-12
  3. Xue C.H, Shi M.M, Chen H.Z, 2006, “Preparation and application of nanoscale micro emulsion as binder for fabric inkjet printing”, Colloids and Surfaces A: Physicochemical. Eng. Aspects, 287, pp.:147–152
  4. Barashkov N. N, Liu R, 2001, “Fluorescent Nanocolorants Based on Dye-Packaging Technology for Ink Jet Application”, NIP17: International Conference on Digital Printing Technologies, Fort Lauderdale, Florida; September 2001, pp.: 878-880
  5. Leelajariyakul S, Noguchi H, Kiatkamjornwong S, 2008, “Surface-modified and micro-encapsulated pigmented inks for ink jet printing on textile fabrics”, Progress in Organic Coatings, 62, pp.: 145–161
  6. Hu Z, Xue M, Zhang Q, Sheng Q, Liu Y, 2008, “Nanocolorants: A novel class of colorants, the preparation and performance characterization”, Dyes and Pigments, 76, pp.: 173-178
  7. Novaković D, Kašiković N, Zeljković Ž, Agić D, Gojo M, 2010, “Thermo graphic analysis of thermal effects on the change of colour differences on the digitally printed textile materials”, Tekstil, Vol. 59 (7), pp.: 297-306
  8. Bankvall C, 1973, “Heat Transfer in Fibrous Material”, Journal of Testing and Evaluation, 1(3), pp.: 235–243
  9. Bomberg M, Klarsfeld S, 1983, “Semi-Empirical Model of Heat Transfer in Dry Mineral Fiber Insulations”, Journal of Thermal Insulation, 6 (1), pp.: 157–173
  10. Mao N, Russell S.J, 2007, “The Thermal Insulation Properties of Spacer Fabrics with a Mechanically Integrated Wool Fiber Surface”, Textile Research Journal, 77 (12), pp.: 914-922
  11. Michalak M, Felczak M, Więcek B, 2009, “Evaluation of the Thermal Parameters of Textile Materials Using the Thermographic Methods”, Fibres & Textiles In Eastern Europe, 17 (3), pp.: 84-89
  12. Herascu N, Simileanu M, Radvan R, 2008, “Color changes in the artwork materials aged by UV radiation”, Romanian Reports in Physics, 60 (1), pp.: 95– 103. TEKSTİL ve KONFEKSİYON 2/2012 123 13. Morent R, De Geyter N, Verschuren J, De Clerck K, Kiekens P, Leys C, 2008, “Non-thermal plasma treatment of textiles”, Surface and Coatings Technology, 202 (14), pp.: 3427-3449
  13. Zhang C, Fang K, 2009, “Surface modification o