KaydedilenlerDerginizi ekleyin

Dergiler / Textile and Apparel / 2026 / Volume: 36 Issue: 3

Investigation of Mechanical Properties of Dyed and Printed Fabrics Containing Recycled Fibers

Leman Atiker(EGE UNIVERSITY, FACULTY OF ENGINEERING, DEPARTMENT OF TEXTILE ENGINEERING, TEXTILE ENGINEERING PR.)0000-0002-8091-3269
Nilgün Özdil(EGE UNIVERSITY, FACULTY OF ENGINEERING, DEPARTMENT OF TEXTILE ENGINEERING, TEXTILE ENGINEERING PR.)0000-0001-9488-5337
Arif Özgüney(EGE UNIVERSITY, FACULTY OF ENGINEERING, DEPARTMENT OF TEXTILE ENGINEERING, TEXTILE ENGINEERING PR.)0000-0003-3936-615X
Sayfa
—
Yayın Tarihi
2026-10-15
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Furthermore, it has been shown that fabrics containing recycled cotton adequately retain their mechanical properties and that it is possible to increase the use of recycled fibers.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Textile recycling is becoming an increasingly important sustainable approach to minimizing environmental load in production processes, reducing chemical, energy, and water consumption.
📊
Temel Bulgular & Veri:The results showed that using 15% recycled cotton fiber in the fabrics and recycled fabrics produced from weaving unit waste performed better in terms of mechanical properties.
💡
Sonuç & Katkı:Furthermore, it has been shown that fabrics containing recycled cotton adequately retain their mechanical properties and that it is possible to increase the use of recycled fibers.
🔬Tür:Research Article
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Textile waste · recycled cotton · reactive dyeing-printing

Abstract

Textile recycling is becoming an increasingly important sustainable approach to minimizing environmental load in production processes, reducing chemical, energy, and water consumption. In this study, the effects of recycled fiber from different sources, different recycled fiber ratios, and the use of recycled fibers in blended fibers on the mechanical properties of woven fabrics were examined. In addition, reactive dyeing and different printing processes (reactive - pigment) were applied to the fabrics, and the effects of these processes were also examined. Tensile and tear strength, abrasion, and pilling resistance and strength properties after multi-cycle washing were performed. The results showed that using 15% recycled cotton fiber in the fabrics and recycled fabrics produced from weaving unit waste performed better in terms of mechanical properties. Furthermore, it has been shown that fabrics containing recycled cotton adequately retain their mechanical properties and that it is possible to increase the use of recycled fibers.

🔖

Bu Makaleye Atıf Yap

Atiker, L., Özdil, N., Özgüney, A. (2026). Investigation of Mechanical Properties of Dyed and Printed Fabrics Containing Recycled Fibers. Textile and Apparel, Volume: 36 Issue: 3. https://doi.org/10.32710/tekstilvekonfeksiyon.1898186

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (43)

  1. Macit H. 2020. Bazı dokuma üretim parametrelerinin geri dönüşüm ipliklerle elde edilen battaniyelerin mekanik özelliklerine etkileri (Master’s Thesis). Retrieved from Ulusal Tez Merkezi. (613913).
  2. Uddin A. J, Rahman M. 2024. Sustainable and cleaner production of elastic core-spun yarns for stretch denim with maximal utilization of recycled cotton extracted from pre-consumer fabric waste. Heliyon, 10(4).
  3. Telli A, Özdil N, Babaarslan O. 2012. Pet şişe atıklarının tekstil endüstrisinde değerlendirilmesi ve sürdürülebilirliğe katkısı. Tekstil ve Mühendis, 19(86), 49-55.
  4. Textile Exchange. 2025. Materials Market Report (pdf), Retrieved from https://textileexchange.org/knowledge-center/reports/materials-market-report-2025/
  5. Eser B, Çelik P, Çay A, Akgümüş D. 2016. Tekstil ve konfeksiyon sektöründe sürdürülebilirlik ve geri dönüşüm olanakları. Tekstil ve Mühendis, 23(101), 43-60.
  6. Vadicherla T, Saravanan D. 2014. Textiles and apparel development using recycled and reclaimed fibers. Roadmap to sustainable textiles and clothing: Eco-friendly raw materials, technologies, and processing methods. Singapore: Springer.
  7. Vitale G. S, Iacuzzi N, Zingale S, Lombardo S, Tuttolomondo T, Guarnaccia P. 2025. Environmental sustainability of cotton: a systematic literature review of life cycle assessments. Journal of Agriculture and Food Research. DOI: https://doi.org/10.1016/ j.jafr.2025.102069.
  8. Amicarelli V, Bux C, Spinelli M.P, Lagioia G. 2022. Life cycle assessment to tackle the take-make-waste paradigm in the textiles production. Waste Management, 151, 10–27. DOI: https://doi.org/ 10.1016/j.wasman.2022.07.032.
  9. Telli A. 2016. Geri dönüşüm pamuk, r-pet ve karışımlarının denim kumaş üretiminde kullanılması (Doctoral dissertation). Retrieved from Ulusal Tez Merkezi. (424218).
  10. Altun Ş. 2014. Tekstil geri kazanım sektörü raporu, Uşak: Ticaret ve Sanayi Odası Raporu.
  11. Wang C, Su J, Liu T, Ge S, Liew RK, Zhang H, Naushad M, Lam SS, Ng HS, Sonne C, Fan W. 2023. A sustainable strategy to transform cotton waste into renewable cellulose fiber self-reinforcing composite paper. Journal of Cleaner Production, 429.
  12. Uddin MB, Uddin AJ. 2023. A sustainable approach to manufacture m´elange yarn from waste jute fiber and pre-consumer cotton fabric waste using I-optimal mixture design. Journal of Cleaner Production, 421, 138376, DOI: https://doi.org/10.1016/j.jclepro.2023.138376.
  13. Arafat Y, Uddin AJ. 2022. Recycled fibers from pre- and post-consumer textile waste as blend constituents in manufacturing 100% cotton yarns in ring spinning: a sustainable and eco-friendly approach. Heliyon, 8 (11). DOI: https://doi.org/10.1016/j.heliyon.2022.e11275.
  14. Pınarlık G, Şenol MF. 2012. İkinci kullanım tekstil liflerinden yapılan open-end rotor ipliklerinin özellikleri, I. Ulusal Geri Kazanım Kongre ve Sergisi. Uşak, Türkiye.
  15. Telli A, Özdil N. 2013. Properties of the yarns produced from r-pet fibers and their blends. Tekstil ve Konfeksiyon, 23(1), 3-10.
  16. Wanassi B, Azzouz B, Ben Hassen M. 2015. Recycling of post-industrial cotton wastes: Quality and rotor spinning of reclaimed fibers. International Journal of Advanced Research, 3(6), 94-103.
  17. Khan RK, Rahman H. 2015. Study of effect of rotor speed, combing-roll speed and type of recycled waste on rotor yarn quality using response surface methodology, IOSR Journal of Polymer and Textile Engineering, 2(1), 47-55.
  18. Yelkovan S. 2015. Pamuk ve geri dönüşüm pamuk liflerinden eğrilen ipliklerin özelliklerinin incelenmesi (Master’s Thesis). Retrieved from Ulusal Tez Merkezi. (483836).
  19. Repon MR, Al Mamun R, Reza S, Das MK, Islam T. 2016. Effect of spinning parameters on thick, thin places and neps of rotor spun yarn. Journal of Textile Science and Technology, 2(3), 47-55.
  20. Vadicherla T, Saravanan D. 2017. Effect of blend ratio on the quality characteristics of recycled polyester/cotton blended ring spun yarn. Fibres&Textiles in Eastern Europe, 25, 48-52.
  21. Goswami L, Basu A. 2024. Spinning of cotton yarn with recycled cotton as a component. Proceedings of the 62nd Joint Technological Conference, Ghaziabad, India.
  22. Kurtoğlu N.Ö, Seventekin N, Pamuk M. 2013. A study on recycling the fabric scraps in apparel manufacturing industry. Tekstil ve Konfeksiyon, 23(3), 286-289.
  23. Gün AD, Alan G, Macit AS. 2016. Thermal properties of socks made from reclaimed fibre. The Journal of The Textile Institute, 107(9), 1112-1121.
  24. Yilmaz E, Özgen Keleş B. 2025. Farklı geri dönüşüm pamuk lifi içeren ipliklerin ve pamuk/polyester karışımlı örme kumaşların fiziksel özelliklerinin araştırılması. Çukurova Üniversitesi Mühendislik Fakültesi Dergisi, 40(2), 387-401.
  25. Borman T, Sun D. 2016. Recycled jean: Property comparison to standard jean. Journal of Fashion Technology and Textile Engineering, 4(2), 4.
  26. Alp G, Yıldırım N, Kertmen M, Türksoy HG. 2023. Geri Dönüşüm Pamuk Karışımlı İpliklerden Üretilen Denim Kumaşların Performans Özelliklerinin İncelenmesi. DEUFMD, 25(74), 275-285.
  27. Sari B, Uzumcu MB, Ozsahin K. 2024. Analysing the effect of mechanically recycled cotton fibres from pre-consumer wastes on mechanical and fastness properties of knitted fabrics. International Journal of Clothing Science and Technology, 1-16.
  28. Özdil N, Dalbaşı ES, Özgüney AT, Atiker L. 2023. Multifunctional modification with TiO2, SiO2, and flame retardant agent on upholstery fabrics produced from recycled cotton fibers. AATCC Journal of Research, 10(4), 223-231.
  29. Raiskio S, Periyasamy A, Hummel M, Heikkilä P. 2025. Transforming mechanically recycled cotton and linen from post-consumer textiles into quality ring yarns and knitted fabrics. Waste Management Bulletin, 3(1), 76-86.
  30. Yurtaslan Ö. 2018. Bir tekstil işletmesinde üretilen tekstil teleflerinin çevreci bir yaklaşımla geri kazanımı (Master’s Thesis). Retrieved from Ulusal Tez Merkezi. (524329).
  31. Doba Kadem F, Ozan R. 2024. Life cycle assessment (lca) of single jersey knitted fabrics containing recycled cotton fiber and fabric performance. Cukurova University Journal of the Faculty of Engineering, 39(3), 821-830.
  32. Telli A, Özdil N. 2015. Effect of recycled PET fibers on the performance properties of knitted Fabrics. Journal of Engineered Fibers and Fabrics, 10(2), 47-60.
  33. Telli A, Babaarslan O. 2017. The effect of recycled fibers on the washing performance of denim fabrics. Journal Of The Textile Institute, 108, 812-820.
  34. Sarıoğlu E. 2019. An investigation on performance optimization of r-PET/cotton and v-PET/cotton knitted fabric. International Journal of Clothing Science and Technology, 31(3), 439-452.
  35. Muthukumara N, Thilagavathi G. 2024. Properties of knit fabrics made from recycled cotton/r-PET blended yarns. Indian Journal of Fibre & Textile Research, 49, 252-256.
  36. Berkalp ÖB, Bakkal M, Yılmaz Ş, Sadıkoğlu TG. 2010. Tekstil atıklarının değerlendirilmesi amacıyla otomotiv uygulamaları için darbe emici özelliğe sahip polimer matrisli kompozit ürün geliştirilmesi, tasarımı ve karakterizasyonu (107M354). Türkiye Bilimsel ve Teknolojik Araştırma Kurumu.
  37. İlik Z. 2018. Bioliflerden üretilmiş atık tekstil kumaşların, kompozit malzemelerde takviye elamanı olarak kullanılabilirliğinin araştırılması (Master’s Thesis). Retrieved from Ulusal Tez Merkezi. (506380).
  38. Atiker L. 2021. Geri dönüşüm yoluyla elde edilen pamuk ve karışım liflerinden üretilen boyalı ve baskılı kumaşların performans ve tutum özelliklerinin araştırılması (Master’s Thesis), Ege University Graduate School of Natural and Applied Science. Retrieved from Ulusal Tez Merkezi. (722783).
  39. Kumpikaitė E, Tautkutė-Stankuvienė I, Milašienė D, Petraitienė S. 2022. Analysis of color fastness and shrinkage of dyed and printed linen/silk fabrics. Coatings, 12(3), 408. https://doi.org/10.3390/ coatings12030408
  40. Gorjanc M, Gerl A, Kert M. 2022. Screen printing of ph-responsive dye to textile. Polymers, 14(3), 447. https://doi.org/ 10.3390/ polym14030447
  41. Kalkancı M. 2024. Study on strength properties of woven fabrics including recycled cotton yarns. Bitlis Eren Üniversitesi Fen Bilimleri Dergisi, 13(3), 779-787.
  42. Ibrahim W, Sarwar Z, Khan A, Hassan A, Azeem A, Nazir A, Hussain U. 2019. A novel study of comparison properties of pigment and reactive dye-printed cotton fabric. Journal of Natural Fibers, 16(6), 825–835. https://doi.org/10.1080/15440478.2018.1440364
  43. Tavčer PF, Košir S, Csiszar E. 2011. Properties of differently printed and easy-care finished linen fabrics. Coloration Technology, 127(3), 194–199. https://doi.org/10.1111/j.1478-4408.2011.00298.x