Dergiler / Textile and Apparel / 2019 / Cilt: 29 Sayı: 2

INVESTIGATION OF MECHANICAL PROPERTIES OF FABRICS WOVEN WITH TENCEL/ COTTON BLEND YARNS

Sayfa
162–170
Yayın Tarihi
2019-06-30
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The results of the study show that the effects of the proportion of the Tencel fibres in the Tencel/cotton blended yarns on the tensile properties, tearing strength, abrasion resistance, bending rigidity and drape coefficient of woven fabrics are of statistical significance, and it was found that the tensile properties, tearing strength and drapability properties were observed to be improve with the increase of Tencel fibre proportion in the blend.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:This study aims to investigate mechanical properties of woven fabrics made from 100 % Tencel, combed cotton yarns and Tencel-cotton blended yarns with different blend ratios.
📊
Temel Bulgular & Veri:The analyses of variance were carried out at 5% (0.05) level of significance.
💡
Sonuç & Katkı:The results of the study show that the effects of the proportion of the Tencel fibres in the Tencel/cotton blended yarns on the tensile properties, tearing strength, abrasion resistance, bending rigidity and drape coefficient of woven fabrics are of statistical significance, and it was found that the tensile properties, tearing strength and drapability properties were observed to be improve with the increase of Tencel fibre proportion in the blend.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Tencel · yarn

Abstract

This study aims to investigate mechanical properties of woven fabrics made from 100 % Tencel, combed cotton yarns and Tencel-cotton blended yarns with different blend ratios. For this purpose, the tensile properties, tearing strength, abrasion resistance, bending rigidity, drapability and wrinkle resistant properties of woven fabrics made from different ratios of Tencel and cotton yarns were tested. All the tests were carried out according to the standards, and the results obtained were assessed by means of SPSS statistical analysis program. The analyses of variance were carried out at 5% (0.05) level of significance. The results of the study show that the effects of the proportion of the Tencel fibres in the Tencel/cotton blended yarns on the tensile properties, tearing strength, abrasion resistance, bending rigidity and drape coefficient of woven fabrics are of statistical significance, and it was found that the tensile properties, tearing strength and drapability properties were observed to be improve with the increase of Tencel fibre proportion in the blend.

Anahtar kelimeler
🔖

Bu Makaleye Atıf Yap

ŞARDAĞ, S. (2019). INVESTIGATION OF MECHANICAL PROPERTIES OF FABRICS WOVEN WITH TENCEL/ COTTON BLEND YARNS. Textile and Apparel, Cilt: 29 Sayı: 2, 162–170. https://ajindex.com/articles/943530

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (9)

  1. Alp, E. 2010, Analysing of Seam Puckerings on The Different Parameters of Tencel Fabrics, Master’s Thesis, The University of Marmara, İstanbul, pp. 4-10.
  2. Badr, A.A., El-Nahrawy, A., Hassanin, A. 2014, Comfort and Protection Properties of Tencel/Cotton Blends, Beltwide Cotton Conferences, New Orleans, LA, 6-8 January, pp. 1009 – 1020. Ibbett, R.N., Domvoglou, D., Phillips, D.A.S. 2008, The Hydrolysis and Recrystallisation of Lyocell and Comparative Cellulosic Fibres in solutions of Mineral Acid, Cellulose, 15, pp. 241–254.
  3. Mbe, P.W. 2000, Lyocell: The Production Process and Market Development: Regenerated Cellulosic Fibres, The Textile Institute, Woodhead Publishing Limited, Cambridge, England, pp. 62-87
  4. Onur, N. 2009, The Research on the Handle Properties of Tencel Fabrics in the Formation Point of the Seam Puckers, Master’s Thesis, The University of Marmara, Istanbul, pp. 4-11.
  5. Owen, G. 2012, Innovation in fibres: The Carbon Fibre and Tencel Stories, Innovation in The Man-Made Fibres Industry: Corporate Strategy and National Institutions, Paper Prepared for Seminar at SPRU, October 21st, pp.1-18.
  6. Bilir, T.B., Şardağ, S. 2018, The Investigation of Performance Properties of Tencel Cotton Blended Yarn, Uludağ University Journal of The Faculty of Engineering, vol.1 (22), pp. 13-28.
  7. Yıldırım, H.B. 2005, The Research of The Handle Properties of Tencel Fabrics in Point of The Formation of The Seam Puckers, Master’s Thesis, The University of Marmara, Istanbul, pp.3-19.
  8. Debbie, J. X. Y. 2003, Tensile Drawing Behavior of Rotor Spun Yarn, The Hong Kong Polytechnic University, Institute of Textiles And Clothing, Dissertations, PoU Library Call No.: [THS] LG51.H577P ITC. Kaimouz, A.W., Wardman, R.H., Christie, R.M. 2009, The Inkjet Printing Process for Lyocell and Cotton Fibres. Part 1: The Significance of Pre-Treatment Chemicals and their Relationship with Colour Strength, Absorbed Dye Fixation and Ink Penetration, Dyes and Pigments, 84, pp. 79–87. DOI: 10.1016/j.dyepig.2009.06.015. Leimer, S., Moore, M.A., Goldsmith, E. 1997, Effects of Laundering and Exposure to Light on Environmentally-İmproved Fabrics, Journal of Testing and Evaluation, (JTEVA), 25(5), pp. 497-502.
  9. Lou, C.W., Lin, C.W., Chen, Y.S.,Yao, C.H., Lin, Z.S., Chao, C.Y., Lin, J.H. 2008, Properties Evaluation Of Tencel/Cotton Nonwoven Fabric Coated with Chitosan for Wound Dressing, Textile Research Journal, 78(3): pp. 248-254. https://doi.Org /10.1177 / 0040517507089747. Männer, J., Ivanoff, D., Morley,