Dergiler / Textile and Apparel / 2021 / Cilt: 31 Sayı: 2

Comparison of Cantilever, Heart Loop and Circular Bending Test Methods in Determining the Bending Behaviours of Sewn Woven Polyester Fabrics

Sayfa
82–90
Yayın Tarihi
2021-06-30
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

In contrast, results of cantilever and heart loop methods showed low to moderate positive correlations for the bending lentghs and bending rigidities of samples.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Fabrics are cut and sewn to form 3-dimensional end-products.
📊
Temel Bulgular & Veri:In this study, 3 simple and standard test methods were used to compare the bending behaviours of fabrics with plied edge seams.
💡
Sonuç & Katkı:In contrast, results of cantilever and heart loop methods showed low to moderate positive correlations for the bending lentghs and bending rigidities of samples.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Sewn fabric · bending behaviour · cantilever method

Abstract

Fabrics are cut and sewn to form 3-dimensional end-products. Bending rigidity is one of the properties that should be interpreted for sewn fabrics as it can affect drape, appearance and sensorial comfort of a garment. In the literature, there are several methods to measure the bending behaviours of fabrics. Parallelly, a variety of tests were employed for bending rigidity of sewn samples but their comparability for sewn samples are not known. In this study, 3 simple and standard test methods were used to compare the bending behaviours of fabrics with plied edge seams. Statistical analysis showed that, circular bend method had no or low correlation with cantilever and heart loop methods. Also any difference between the different types of sewn samples could not be detected by this method. In contrast, results of cantilever and heart loop methods showed low to moderate positive correlations for the bending lentghs and bending rigidities of samples.

🔖

Bu Makaleye Atıf Yap

KARA, Ş. (2021). Comparison of Cantilever, Heart Loop and Circular Bending Test Methods in Determining the Bending Behaviours of Sewn Woven Polyester Fabrics. Textile and Apparel, Cilt: 31 Sayı: 2, 82–90. https://ajindex.com/articles/943462

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (16)

  1. Kurumer G. 2012. Konfeksiyon uretimi ve teknolojisi (2nd Press). Izmir: Printer Ofset Matbaacılık
  2. Jones I, Stylios GK. 2013. Joining textiles: Principles and applications. Cambridge: Woodhead Publishing Limited
  3. Fan J, Hunter L. 2009. Engineering apparel fabrics and garments. Cambridge: Woodhead Publishing Limited
  4. Namiranian R, Shaikhzadeh Najar S, Etrati SM, Manich AM. 2014. Seam slippage and seam strength behavior of elastic woven fabrics under static loading. Indian Journal of Fibre & Textile Research 39(3), 221-229
  5. Choudhary AK, Goel A. 2013. Effect of some fabric and sewing conditions on apparel seam characteristics. Journal of Textiles 2013, 1-7
  6. Gurarda A. 2008. Investigation of the seam performance of PET/nylon-elastane woven fabrics. Textile Research Journal 78(1), 21-27
  7. Bharani M, Shiyamaladevi PSS, Mahendra Gowda RV. 2012. Characterization of seam strength and seam slippage on cotton fabric with woven structures and finish. Research Journal of Engineering Sciences 1(2), 41-50
  8. Sular V, Mesegul C, Kefsiz H, Seki Y. 2015. A comparative study on seam performance of cotton and polyester woven fabrics. The Journal of the Textile Institute 106(1), 19-30
  9. Citoglu F, Kaya G. 2011. Dikis iplik ozelliklerinin ve dikis sıkliklarinin farklı dikis acilarında dikis mukavemeti uzerine etkileri. Tekstil ve Konfeksiyon 21(2), 182-188
  10. Xin LU. 2010. Effect of sewing form and parameters on seam strength of silk fabric. Shanghai Textile Science & Technology 5, 17
  11. Ozdemir H, Yavuzkasap D. 2012. The effects of yarn and fabric structural parameters on the seam slippage, abrasion and pilling properties of double woven upholstery fabrics. Industria Textila 63(6), 307-314
  12. Yeşilpınar S, Bahar S. 2007. The effect of sewing and washing processes on the seam strength of denim trousers. AATCC review 7(10), 27-31
  13. Yeşilpınar S. 2006. Analysis of the performance of sewing threads manufactured from conventional and compact ring-spun yarns. Fibres & Textiles in Eastern Europe 14(2), 20-23
  14. Gribaa S, Ben Amar S, Dogui A. 2006. Influence of sewing parameters upon the tensile behavior of textile assembly. International Journal of Clothing Science and Technology, 18 (4), 235-246
  15. Chowdhary U, Poynor D. 2006. Impact of stitch density on seam strength, seam elongation, and seam efficiency. International Journal of Consumer Studies 30(6), 561-568
  16. Tarafder N, Karmakar R, Mondal M. 2007. The effect of stitch density on seam per