Dergiler / Konya Journal of Engineering Sciences / 2017 / Cilt: 5 Sayı: 4

Güneş Enerjisi Destekli Hidrojen Üretimi: Teorik Bir Vaka Çalışması

SOLAR ENERGY SUPPORTED HYDROGEN PRODUCTION: A THEORETICAL CASE STUDY

Sayfa
536–554
Yayın Tarihi
2017-12-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Yakıt pilinin güç eğrisi, 0.001 saniye cevap süresi ortaya koymuştur.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Hidrojen önemli bir enerji taşıyıcısıdır ve enerji depolanması için güçlü bir adaydır.
📊
Temel Bulgular & Veri:Bu çalışmanın ana amacı bir bilgisayar simulasyonu vasıtası ile kırsal kesimler gibi elektrik şebekesinden uzaktaki küçük ölçekli tüketiciler için güneş enerjisinin elektriksel formda elde edildiği ve saha sonra bir elektrolizer ile hidrojen şeklinde depolandığı bir sistemi değerlendirmektir.
💡
Sonuç & Katkı:Yakıt pilinin güç eğrisi, 0.001 saniye cevap süresi ortaya koymuştur.
🔬Tür:Deneysel Tarla Denemesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Fotovoltaik · Hidrojen yakıt pili · Matematik model

Özet

Hidrojen önemli bir enerji taşıyıcısıdır ve enerji depolanması için güçlü bir adaydır. Güneş gibi kesikli bir enerji kaynağının depolanması için kullanışlı bir araç olacaktır. Bu çalışmanın ana amacı bir bilgisayar simulasyonu vasıtası ile kırsal kesimler gibi elektrik şebekesinden uzaktaki küçük ölçekli tüketiciler için güneş enerjisinin elektriksel formda elde edildiği ve saha sonra bir elektrolizer ile hidrojen şeklinde depolandığı bir sistemi değerlendirmektir. Hidrojen daha sonra tekrar elektrik üretmek için bir yakıt hücresinde tüketilebilir. Önce güneş enerjisinden fotovoltaik paneller aracılığı ile elde edilen enerji ile bir akü şarj edilmiş ve bu enerji suyun elektrolizi işleminde kullanılmak suretiyle hidrojen elde edilmiştir. İkinci aşamada elde edilen hidrojen bir yakıt hücresinde kullanılarak elektrik enerjisi elde edilmiştir. Oluşturulan matematiksel model, geliştirilen bilgisayar programı vasıtası ile çözümlenerek teorik bir inceleme yapılmıştır. Bu modelde Konya iline ait güneş ışınımının yıllara göre aylık ortalama değerlerine ait veriler kullanılmıştır. Giriş parametreleri olarak elektrolizör sıcaklığı, elektroliz basınç değerleri ve fotovoltaik panellerin verimi kullanılmıştır. Genel sistem verim ve etkenliği, üretilen elektrik ve hidrojen miktarları ise çıkış parametreleri olarak belirlenmiştir. Elde edilen sonuçlara göre, gerek üretilen hidrojen miktarı yönünden, gerekse sistemin etkenliği ve verimi yönünden, giriş parametreleri arasında en etkili bileşenin sıcaklık olduğu görülmüştür. Sistemin fotovoltaik kısmından 400 W ile 1800 W arasından geniş bir yelpazede elektrik enerjisi elde edilebilmektedir. Diğer yandan aylık hidrojen üretimi 120-130 g/ay aralığındadır. Yakıt pilinin güç eğrisi, 0.001 saniye cevap süresi ortaya koymuştur. Önerilen sistem Konya’da ve dünyada benzer iklim özelliklerine sahip başka bölgelerde kullanılabilir.

Abstract

Hydrogen is an important energy vector and a strong candidate for energy storage. It will be a useful tool for storing intermittent energy sources such as sun. The main objective of this work is to assess a system harnessing solar energy in electrical form and store it as hydrogen by means of an electrolyzer for small scale consumers away from the grid such as rural areas by computer simulation. Hydrogen then can be consumed in a fuel cell in order to generate electricity. The electrical energy obtained from solar energy via photovoltaic panels was used in order to charge a battery first and then hydrogen was acquired by using aforementioned energy in the electrolysis of water. In the second stage, electricity is generated in a fuel cell by using the generated hydrogen. A theoretical analysis was done via computer software by solving the constituted mathematical model. Data containing monthly average insolation values of Konya City according to years were used in this model. Electrolyzer temperature and pressure values and efficiencies of the photovoltaic panels were used as the input parameters. General system efficiency and effectiveness, generated electricity and hydrogen amounts were obtained as the output parameters. Among all, temperature was found to be the most effective parameter according to the obtained results considering the generated hydrogen amount, system effectiveness and efficiency. A wide range of electrical power between 400 W and 1800 W can be harnessed from the PV part of the system. Hydrogen production in the other hand can be attained in the range of 120-130 g/month. Power curve of the fuel cell at the start up of the system yields a 0.001 seconds reaction time. The proposed system can be utilized in rural parts of Konya and climatically similar regions in the world.

🔖

Bu Makaleye Atıf Yap

ATES, A., SHEKARDASHT, S. Z., CANLI, E. (2017). Güneş Enerjisi Destekli Hidrojen Üretimi: Teorik Bir Vaka Çalışması. Konya Journal of Engineering Sciences, Cilt: 5 Sayı: 4, 536–554. https://ajindex.com/articles/909368

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (11)

  1. Akyildiz, H., Öztürk, T., 2013, “Production of mg-Mased Amorphous/Nanostructured Thin Films from Multi-Elemental Sources for Hydrogen Storage Applications”, J. Fac.Eng.Arch. Selcuk Univ., Vol. 28(1), pp. 1-10.
  2. Ali, D., Gazey, R., Aklil, D., 2016, “Developing a Thermally Compensated Electrolyzer Model Coupled with Pressurized Hydrogen Storage for Modeling the Energy Efficiency of Hydrogen Energy Storage Systems and Identifying Their Operation Performance Issues”, Renewable and Sustainable Energy Reviews, Vol. 66, pp. 27-37.
  3. Allison, J., 2017, “Robust Multi-Objective Control of Hybrid Renewable Microgeneration Systems with Energy Storage”, Applied Thermal Engineering, Vol. 114, pp. 1498-1506.
  4. Amusat, O.O., Shearing, P.R., Fraga, E.S., 2017, “On the Design of Complex Energy Systems: Accounting for Renewable Variability in Systems Sizing”, Computers and Chemical Engineering, Vol. 103, pp. 103-115.
  5. Amphlett, J.C., Baumert, R.M., Mann, R.F., Peppley, B.A., Roberge, P.R., Harris, T.J., 1995, “Performance Modeling of the Ballard-Mark-Iv Solid Polymer Electrolyte Fuel-Cell: 1. Mechanistic Model Development”, Journal of the Electrochemical Society, Vol. 142(1), pp. 1-8.
  6. Bai, M., Song, K., Sun, Y., He, M., Li, Y., Sun, J., 2014, “An Overview of Hydrogen Underground Storage Technology and Prospects in China”, Journal of Petroleum Science and Engineering, Vol. 124, pp. 132-136.
  7. Baricco, M., Bang, M., Fichtner, M., Hauback, B., Linder, M., Luetto, C., Moretto, P., Sgroi, M., 2017, “SSH2S: Hydrogen Storage in Complex Hydrides for an Auxiliary Power Unit Based on High Temperature Proton Exchange Membrane Fuel Cells”, Journal of Power Sources, Vol. 342, pp. 853-860.
  8. Boudries, R., 2013, “Analysis of Solar Hydrogen Production in Algeria: Case of an Electrolyzer-Concentrating Photovoltaic System”, International Journal of Hydrogen Energy, Vol. 38(26), pp. 11507-11518.
  9. Ceraolo, M., Miulli, C., Pozio, A., 2003, “Modelling Static and Dynamic Behaviour of Proton Exchange Membrane Fuel Cells on the Basis of Electro-Chemical Description”, Journal of Power Sources, Vol. 113(1), pp. 131-144.
  10. Chong, L.W., Wong, Y.W., Rajkumar, R.K., Rajkumar, R.K., Isa, D., 2016, “Hybrid Energy Storage Systems and Control Strategies for Stand-Alone Renewable Energy Power Systems”, Renewable and Sustainable Energy Reviews, Vol. 66, pp. 174-189.
  11. Esquivel, J.P., Buser, J.R., Lim, C.W., Domínguez, C., Rojas, S., Yager, P., Sabate, N., 2017, “Single-use Paper-Based Hydrogen Fuel Cells for Point-of-care Dia