Dergiler / Konya Journal of Engineering Sciences / 2021 / Cilt: 9

Pd/TiO2 KATALİZÖRÜNÜN SENTEZİ VE SODYUM BORHİDRÜRDEN HİDROJEN ÜRETİMİNDE AKTİVİTESİNİN BELİRLENMESİ

Synthesis of Pd/TiO2 Catalyst and Determination of Its Activity in Hydrogen Production from Sodium Borohydride

Sayfa
66–78
Yayın Tarihi
2021-12-30
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Arrhenius eşitliği ile aktivasyon enerjisi 33,23 kJ/mol olarak hesaplanmıştır.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Hidrojen, yenilenebilir enerji kaynaklarından üretilen ve artan enerji talebine sürdürülebilir bir çözüm olabilecek çevre dostu bir enerji taşıyıcısıdır.
📊
Temel Bulgular & Veri:Bu çalışmada, sol-jel yöntemi ile Pd/TiO2 katalizörü sentezlenmiş ve X-Işınları difraktometresi (XRD), Brunauer, Emmett-Teller (BET), X-Işınları Floresans (XRF) ve Taramalı Elektron Mikroskobu-Enerji Dağılımlı X-Işınları (SEM-EDX) teknikleri ile karakterize edilmiştir.
💡
Sonuç & Katkı:Arrhenius eşitliği ile aktivasyon enerjisi 33,23 kJ/mol olarak hesaplanmıştır.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Sol-jel · Pd/TiO2 · Sodyum borhidrür

Özet

Hidrojen, yenilenebilir enerji kaynaklarından üretilen ve artan enerji talebine sürdürülebilir bir çözüm olabilecek çevre dostu bir enerji taşıyıcısıdır. Hidrojenin depolanması ve iletimi için metal borhidrürler depolama kapasiteleri ile öne çıkmaktadır. Bu çalışmada, sol-jel yöntemi ile Pd/TiO2 katalizörü sentezlenmiş ve X-Işınları difraktometresi (XRD), Brunauer, Emmett-Teller (BET), X-Işınları Floresans (XRF) ve Taramalı Elektron Mikroskobu-Enerji Dağılımlı X-Işınları (SEM-EDX) teknikleri ile karakterize edilmiştir. Katalizörün aktivite çalışmaları hidrojen üretmek amacıyla NaBH4’ün hidroliz reaksiyonunda gerçekleştirilmiştir. Deneysel çalışma koşulları 100 mg NaBH4, 100 mg katalizör, 5 mL 0,25 M NaOH olarak belirlenmiş ve üç farklı reaksiyon sıcaklığı (20, 40 ve 60 oC) denenmiştir. En yüksek hidrojen verimi (%100) ve hidrojen üretim hızı (102 mL/gkat.dk) 60 oC reaksiyon sıcaklığında elde edilmiştir. Katalizörün tekrar kullanılabilirlik testlerinde ilk 4 kullanımdan sonra aktivitesinde azalma olduğu gözlenmiştir. NaBH4 hidrolizi reaksiyonuna n. derecede reaksiyon kinetiği modeli uygulanarak reaksiyon hız derecesi 0,7 olarak belirlenmiştir. Arrhenius eşitliği ile aktivasyon enerjisi 33,23 kJ/mol olarak hesaplanmıştır.

Abstract

Hydrogen is an environmentally friendly energy carrier that can be a sustainable solution to the increasing energy demand, produced from renewable energy sources. For the storage and transmission of hydrogen, metal borohydrides stand out with their hydrogen storage capacities. In this study, Pd/TiO2 catalyst was synthesized by sol-gel method and characterized by X-Ray Diffractometry (XRD), Brunauer, Emmett-Teller (BET), X-Ray Fluorescence (XRF), Scanning Electron Microscope- Energy Dispersive X‑Ray (SEM-EDX) techniques. The activity studies of the synthesized catalyst were carried out in the hydrolysis reaction of NaBH4 to produce hydrogen. Experimental studying conditions were determined as 100 mg NaBH4, 100 mg catalyst, 5 mL 0.25 M NaOH and three different reaction temperature parameters (20, 40 and 60 oC) were tested. The highest hydrogen yield (100%) and hydrogen production rate (102 mL/gcat.min) were obtained at 60 oC reaction temperature. In the reusability tests of the catalyst, a decrease in activity was observed after the first 4 uses. By applying the nth order reaction kinetics model to the NaBH4 hydrolysis reaction, the reaction rate degree was determined to be 0.7. The activation energy was calculated as 33.23 kJ/mol with the Arrhenius equation.

🔖

Bu Makaleye Atıf Yap

DÖNMEZ, F., AYAS, N. (2021). Pd/TiO2 KATALİZÖRÜNÜN SENTEZİ VE SODYUM BORHİDRÜRDEN HİDROJEN ÜRETİMİNDE AKTİVİTESİNİN BELİRLENMESİ. Konya Journal of Engineering Sciences, Cilt: 9, 66–78. https://ajindex.com/articles/909033

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (11)

  1. Akbayrak, S., Özçifçi, Z., Tabak, A., 2019, "Noble metal nanoparticles supported on activated carbon: Highly recyclable catalysts in hydrogen generation from the hydrolysis of ammonia borane", Journal of Colloid and Interface Science, Cilt 546, ss. 324–332.
  2. Babu, N. S., Lingaiah, N., Pasha, N., Kumar, J. V., Prasad, P. S. S., 2009, "Influence of particle size and nature of Pd species on the hydrodechlorination of chloroaromatics: Studies on Pd/TiO2 catalysts in chlorobenzene conversion", Catalysis Today, Cilt 141 Sayı (1–2), ss. 120–124.
  3. Bozkurt, G., Özer, A., Yurtcan, A. B., 2019, "Development of effective catalysts for hydrogen generation from sodium borohydride: Ru, Pt, Pd nanoparticles supported on Co3O4", Energy, Cilt 180, ss. 702–713.
  4. Ceyhan, A. A., Edebali, S., Fangaj, E., 2020, "A study on hydrogen generation from NaBH4 solution using Co-loaded resin catalysts". International Journal of Hydrogen Energy, Cilt 45, Sayı 60, ss. 34761–34772.
  5. Chen, K., Ouyang, L., Wang, H., Liu, J., Shao, H., Zhu, M., 2020, "A high-performance hydrogen generation system: Hydrolysis of LiBH4-based materials catalyzed by transition metal chlorides", Renewable Energy, Cilt 156, ss. 655–664.
  6. Crisafulli, C., Scir, S., Salanitri, M., Zito, R., Calamia, S., 2011, "Hydrogen production through NaBH4 hydrolysis over supported Ru catalysts: An insight on the effect of the support and the ruthenium precursor", International Journal of Hydrogen Energy, Cilt 36 Sayı 6, ss. 3817–3826.
  7. Colak, T. O., Tuc Altaf, C., Minkina, V. G., Shabunya, S. I., Sankir, M., Demirci Sankir, N., Kalinin, V. I., 2021, "Efficient Hydrogen Generation with Co3O4@ TiO2-g-C3N4 Composite Catalyst via Catalytic NaBH4 Hydrolysis", Catalysis Letters, ss. 1-10.
  8. Dai, P., Zhao, X., Xu, D., Wang, C., Tao, X., Liu, X., Gao, J., 2019, "Preparation, characterization, and properties of Pt/Al2O3/cordierite monolith catalyst for hydrogen generation from hydrolysis of sodium borohydride in a flow reactor", International Journal of Hydrogen Energy, Cilt 44, Sayı 53, ss. 28463–28470.
  9. Dönmez, F., Ayas, N., 2018, "Effect of Ru/C and Ni/TiO2 on the Hydrogen Generation from Metal Hydrides", Journal of Clean Energy Technologies, Cilt 6, Sayı 5, ss. 361–365.
  10. Dönmez, F., Ayas, N., 2021, "Synthesis of Ni/TiO2 catalyst by sol-gel method for hydrogen production from sodium borohydride", International Journal of Hydrogen Energy, Cilt 46, Sayı 57, ss. 29314–29322.
  11. Dou, S., Zhou, S., Huang, H., Yan, P., Shoko, E., Isimjan, T. T., Yang, X.