Dergiler / Politeknik Dergisi / 2022 / Cilt: 25 - Sayı: 4

Yapay Sinir Ağlarıyla Asenkron Motor Çoklu Arızalarının Tespiti ve Sınıflandırılması

Detection and Classification of Multiple Faults of Induction Motors by Using Artificial Neural Networks

Sayfa
1687–1699
Yayın Tarihi
2022-12-16
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Elde edilen sonuçlarla sunulan yöntemin uygulanabilirliği gösterilmiştir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Asenkron motor arızalarının tespiti asenkron motorların bakımı için kritik bir konudur.
📊
Temel Bulgular & Veri:Bu çalışmada, 3 kW bilezikli bir asenkron motorun stator kısa-devre arızaları, kırık rotor çubuğu ile iç bilezik ve dış bilezik rulman arızalarının tespiti ve sınıflandırılması çok katmanlı geri yayılım algoritmasına sahip yapay sinir ağı (YSA) modelleri ile gerçekleştirilmektedir.
💡
Sonuç & Katkı:Elde edilen sonuçlarla sunulan yöntemin uygulanabilirliği gösterilmiştir.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Asenkron motorlar · arıza tipleri · çoklu arıza

Özet

Asenkron motor arızalarının tespiti asenkron motorların bakımı için kritik bir konudur. Stator akımı analizi motor arızalarını tespit etmek için yaygın olarak kullanılan bir yöntemdir. Asenkron motor arızalarının tespitine yönelik çok sayıda çalışma bulunmaktadır. Ancak çoklu arıza tespiti ve sınıflandırılmasına yönelik sınırlı sayıda çalışma yapılmıştır. Bu çalışmada, 3 kW bilezikli bir asenkron motorun stator kısa-devre arızaları, kırık rotor çubuğu ile iç bilezik ve dış bilezik rulman arızalarının tespiti ve sınıflandırılması çok katmanlı geri yayılım algoritmasına sahip yapay sinir ağı (YSA) modelleri ile gerçekleştirilmektedir. Çalışma üç aşamada gerçekleştirildi. Birinci aşamada asenkron motor tekil arızalarla birlikte test edildi. Asenkron motor stator sargısı %1, %2, %3, %4 ve %5 oranında kısa-devre edilerek, rotorda üç çubuk kırılarak ve motorun yük tarafı rulmanının iç bileziğinde ve dış bileziğinde arızalar oluşturularak ayrı ayrı test edildi. İkinci aşamada motor, %3 ve %5 stator sargısı kısa-devre arızalarıyla birlikte üç çubuğu kırık rotor ile test edildi. Üçüncü aşamada ise asenkron motor %3 ve %5 stator sargısı kısa-devre arızası, üç çubuğu kırık rotor, iç bileziği ve dış bileziği arızalı rulman ile birlikte test edildi. Bütün testlerde motor tam yük altında çalıştırılmıştır. Sunulan yöntem ile çoklu arızaların tespiti ve sınıflandırılması gerçekleştirilmiştir. Yapılan çalışmada, çoklu arıza tespitinde en yüksek başarım oranı %87 olarak elde edildi. Elde edilen sonuçlarla sunulan yöntemin uygulanabilirliği gösterilmiştir.

Abstract

Detection of induction motor faults is a critical issue for the maintenance of induction motors. Analysis of the stator current is a widely used method to detect the faults of induction motors. There are many of studies on the detection of faults of induction motors but few studies on the detection of multiple faults are reported. In this study, the detection and classification of short-circuit faults of stator winding, broken rotor bars and inner/outer race bearing faults of a 3 kW squarel-cage induction motor are implemented by ANN. The study was carried out in three stages. In the first stage, the induction motor was tested with single faults including 1%, 2%, 3%, 4% and 5% short-circuited stator windings, three broken rotor bars, and inner/outer race bearing faults. In the second stage, induction motor was tested with 3% and 5% short-circuit stator windings and with three broken rotor bars. In the third stage, induction motor was tested with 3% and 5% short-circuit stator windings, rotor with three broken bars and inner/outer race bearing faults. The induction motor has been tested under full load. The detection and classification of multiple faults were realized by the proposed method. The highest performance rate in the detection of multiple faults was achieved with 87% accuracy rate. The resuts shows the applicability of the proposed method.

🔖

Bu Makaleye Atıf Yap

KAYA, K., ÜNSAL, A. (2022). Yapay Sinir Ağlarıyla Asenkron Motor Çoklu Arızalarının Tespiti ve Sınıflandırılması. Politeknik Dergisi, Cilt: 25 - Sayı: 4, 1687–1699. https://ajindex.com/articles/880123

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (14)

  1. Yeh C., Sayed-Ahmed A., Povinelli R., “A Reconfigurable motor for experimental emulation of stator winding inter-turn and broken bar faults in polyphase induction machines”, IEEE Trans. Energy Convers, 23(4), 1005-1014, (2008)
  2. Bonnet A.H., “Cause and analysis of stator and rotor failures in threephase squirrel-cage induction motors”, IEEE Transactıon on Industry Applıcatıons, 28(4), 921–437, (1992)
  3. Eftekhari M., Moallem M., Sadri S., Shojaei A., “Review of induction motor testing and monitoring methods for inter turn stator winding faults”, Iranian Conference on Electrical Engineering,13–18, (2013)
  4. Nandi S., Toliyat H.A., Li X.,” Condition monitoring and fault diagnosis of electrical motors—A Review”, IEEE Trans. Energy Convers., 20(4), 719-729, (2005)
  5. Siddique A., Yadava G.S., and Singh B., “A Review of Stator Fault Monitoring Techniques of Induction Motors”. IEEE Transactions on Energy Conversion, 20(1), 106-114, (2005)
  6. IEEE, IEEE Guide for Testing Turn Insulation of Form-Wound Stator Coils for Alternating-Current Electric Machines, (2004)
  7. Bonnett A, Yung C.,” Increased efficiency versus increased reliability”, IEEE Ind. Appl. Mag., 14(1), 29-36, (2008)
  8. Immovilli F., et al., “Diagnosis of bearing faults in induction machines by vibration or current signals: A critical comparison”, IEEE Trans. Ind. Appl., 46(4), 1350-1359, (2010)
  9. Ukil A., Chen S., Andenna A., “Detection of stator short circuit faults in three-phase induction motors using motor current zero crossing instants”, Electric Power Systems Research, 81(4),1036-1044, (2011)
  10. Leite V., Borges da Silva J.G., “Detection of localized bearing faults in induction machines by spectral kurtosis and envelope analysis of stator current”, IEEE Trans. Ind. Electron., 62(3), 1855-1865, (2015)
  11. Frosini L, Bassi E., “Stator current and motor efficiency as indicators for different types of bearing faults in induction motors”, IEEE Trans. Ind. Electron., 57(1), 244-251, (2010)
  12. Siddiqui K.M., Sahay K., Giri V.K., “Health-monitoring-and-fault-diagnosis-ininduction-motor-a-review”, International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, 3(1),6549-6564, (2014)
  13. Henao H., et al., “Trends in fault diagnosis for electrical machines: A review of diagnostic techniques”, IEEE ind. Electron. Mag.,8(2), 31-42, (2014)
  14. Kang, M., Kim j., Kim J.M., “High-performance and energy-efficient fault diagnosis using effec