Dergiler / Politeknik Dergisi / 2022 / Cilt: 25 - Sayı: 4

Farklı Sarılı Beton Modelleri için Betonarme Kolonların Doğrusal Olmayan Davranışlarının İncelenmesi

Investigation of Nonlinear Behavior of the Reinforced Concrete Columns for Different Confined Concrete Models

Sayfa
1447–1462
Yayın Tarihi
2022-12-16
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Mander modelinden ve TBDY (2018) ile elde edilen sonuçlar birbirine yakındır.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Betonarme kare kolonların farklı sargılı beton modellerine göre gerilme-şekil değiştirme ve moment-eğrilik davranışı analitik olarak incelenmiştir.
📊
Temel Bulgular & Veri:Enine donatı oranı ve beton sınıfının betonarme kolon modellerinin davranışına etkisi incelenmiştir.
💡
Sonuç & Katkı:Mander modelinden ve TBDY (2018) ile elde edilen sonuçlar birbirine yakındır.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:2018 Verileri
⚙️Değişkenler:Gerilme-şekil değiştirme · moment-eğrilik · doğrusal olmayan davranış

Özet

Betonarme kare kolonların farklı sargılı beton modellerine göre gerilme-şekil değiştirme ve moment-eğrilik davranışı analitik olarak incelenmiştir. Enine donatı oranı ve beton sınıfının betonarme kolon modellerinin davranışına etkisi incelenmiştir. Farklı sargılı beton modelleri için sargı etkinlik katsayısı, etkili yanal basınç gerilmesi, sargılı beton basınç dayanımı, maksimum beton gerilmesinde birim kısalma ve sargılı betondaki maksimum basınç birim şekil değiştirme değerleri hesaplanmıştır. İkinci bölümde, farklı tasarım parametrelerinin moment-eğrilik ilişkileri üzerindeki etkilerinin incelenmesi için parametrik bir araştırma yapılmıştır. TBDY (2018), Mander modeli (1988), Saatcioğlu ve Ravzi (1992) sargılı beton modelleri kullanılarak betonarme kesitlerde analitik moment-eğrilik ilişkileri elde edilmiştir. Parametrelerin betonarme kare kolon davranışı üzerindeki etkileri, enine kesitin eğrilik ve moment kapasitesi açısından değerlendirilmiştir. Betonarme kolon modellerinde, gerilme-şekil değiştirme ve moment-eğrilik ilişkileri elde edilmiş ve farklı parametrelere göre karşılaştırılmıştır. Mander modelinden elde edilen sargılı beton basınç dayanımı ve nihai moment değerleri, enine donatı minimum aralık değerlerine yakın olduğunda Saatçioğlu ve Ravzi modeline göre daha yüksektir. Mander modelinden ve TBDY (2018) ile elde edilen sonuçlar birbirine yakındır.

Abstract

Stress-strain and moment-curvature behavior of the reinforced concrete (RC) square columns have been analytically investigated according to different confined concrete models. The effect of transverse reinforcement diameter, transverse reinforcement spacing and concrete grade on the behavior of RC column models were investigated. For different confined concrete models, the confinement effectiveness coefficient, effective lateral confining stress, confined concrete compressive strength, strain at maximum concrete stress and ultimate concrete compressive strain values were calculated. In the second part, a parametric investigation was carried out for examining the effects of different design parameters on the moment-curvature relationships. Analytical moment-curvature relationships were obtained for RC cross-sections by using the TBEC (2018), Mander model (1988), Saatcioglu and Ravzi (1992) confined concrete models. The effects of the design parameters on the RC square column behavior were evaluated in terms of moment capacity and the curvature of the cross-section. In RC column models, stress-strain and moment-curvature relationships are obtained and compared according to different parameters. Confined concrete strength and the ultimate moment values obtained from the Mander model were higher than the Saatcioglu and Ravzi model when the transverse reinforcement close to the minimum spacing values. The results obtained from the Mander model and TBEC (2018) are close to each other.

🔖

Bu Makaleye Atıf Yap

FOROUGHİ, S., YÜKSEL, B. (2022). Farklı Sarılı Beton Modelleri için Betonarme Kolonların Doğrusal Olmayan Davranışlarının İncelenmesi. Politeknik Dergisi, Cilt: 25 - Sayı: 4, 1447–1462. https://ajindex.com/articles/880100

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (12)

  1. Ucar T., Merter O. and Duzgun M., “Determination of lateral strength and ductility characteristics of existing mid-rise RC buildings in Turkey”, Computers and Concrete, 16(3), 467-485, (2015)
  2. Yuksel S.B. and Foroughi S., “Analytical Investigation of Confined and Unconfined Concrete Strength of RC Columns”, Konya Journal of Engineering Sciences, 7(3), 612-631, (2019)
  3. Foroughi S. and Yuksel S.B., “Investigation of the Moment-Curvature Relationship for RC Square Columns”, Turkish Journal of Engineering (TUJE), 4(1), 36-46, (2020)
  4. Foroughi S., Jamal R. and Yüksel S.B., “Effect of Confining Reinforcement and Axial Load Level on Curvature Ductility and Effective Stiffness of Reinforced Concrete Columns”, El-Cezerî Journal of Science and Engineering, 7(3), 1309-1319, (2020)
  5. Foroughi S. and Yüksel S.B., “Analytical investigation of curvature ductility of reinforced concrete columns”, Uludağ University Journal of The Faculty of Engineering, 25(1), 27-38, (2020)
  6. Yüksel S.B. and Foroughi S., “Analysis of Bending Moment-Curvature and the Damage Limits of Reinforced Concrete Circular Columns”, Avrupa Bilim ve Teknoloji Dergisi, (19), 891-903, (2020)
  7. Olivia M. and Mandal P., “Curvature Ductility Factor of Rectangular Sections RC Beams”, Journal of Civil Engineering, 16(1), 1-13, (2005). [8] Ćurić I., Radić J. and Franetović M., “Determination of the Bending Moment-Curvature Relationship for RC Hollow Section Bridge Columns”, Tehnicki Vjesnik - Technical Gazette, 23(3), 907-915, (2016)
  8. Dok G., Ozturk H. and Demir A., “Determining Moment-Curvature Relationship of RC Columns”, The Eurasia Proceedings of Science, Technology, Engineering and Mathematics, 1, 52-58, (2017)
  9. Bedirhanoglu I. and Ilki A., “Theoretical Moment-Curvature Relationships for RC Members and Comparison with Experimental Data”, Sixth International Congress on Advances in Civil Engineering, 6-8 October Bogazici University, Istanbul, Turkey, pp. 231-240, (2004)
  10. Jun J. and Hui W., “The Relationship between Moment and Curvature and the Elastic-Plastic Seismic Response Analysis of High Pier Section”, the Open Mechanical Engineering Journal, 9, 892-899, (2015)
  11. Milašinovic´ D.D., Goleš D. and Ceh A., “Rheological-Dynamical Continuum Damage Model Applied to Research of the Rotational Capacity of a Reinforced Concrete Beams”, Periodica Polytechnica Civil Engineering, 60(4), 661-667, (2016)
  12. Milasinovic D.D. and Goles D., “Geometric Nonlinear Analysis of