Dergiler / European Mechanical Science / 2022 / Cilt: 6 - Sayı: 4

Role of sintering conditions on structural and mechanical properties of carbon fiber fabric reinforced ZrB2-Sic composites

Sayfa
278–284
Yayın Tarihi
2022-12-20
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The densities, phase developments, microstructure analyses and mechanical properties of the composites were determined by the Archimedes principle, X-Ray Diffraction, Scanning Electron Microscopy, and three-point bending test, respectively.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In this study, the effects of sintering conditions on the structural and mechanical properties of spark plasma sintered ZrB2-based composites were investigated in detail.
📊
Temel Bulgular & Veri:In addition, to observe the impact of the binder, the binder was used in some materials.
💡
Sonuç & Katkı:The densities, phase developments, microstructure analyses and mechanical properties of the composites were determined by the Archimedes principle, X-Ray Diffraction, Scanning Electron Microscopy, and three-point bending test, respectively.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Ceramic matrix composites · Carbon fiber · Spark plasma sintering

Abstract

In this study, the effects of sintering conditions on the structural and mechanical properties of spark plasma sintered ZrB2-based composites were investigated in detail. In addition, to observe the impact of the binder, the binder was used in some materials. Thus, the effects of binder on the properties of composites while preparing ceramic slurry were tested. The effects of the sintering conditions of the materials prepared at different temperatures and stages on the composites were examined in detail. The densities, phase developments, microstructure analyses and mechanical properties of the composites were determined by the Archimedes principle, X-Ray Diffraction, Scanning Electron Microscopy, and three-point bending test, respectively.

🔖

Bu Makaleye Atıf Yap

AĞIL, A. A., AYAS, E. (2022). Role of sintering conditions on structural and mechanical properties of carbon fiber fabric reinforced ZrB2-Sic composites. European Mechanical Science, Cilt: 6 - Sayı: 4, 278–284. https://ajindex.com/articles/859321

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (11)

  1. Ding, Y., Dong, S., Huang, Z., Jiang, D. (2007). Fabrication of short C fiber-reinforced SiC composites by spark plasma sintering. Ceramics International, 33, 1, 101–105, DOI: 10.1016/j.ceramint.2005.08.004
  2. Tang, S., Deng, J., Wang, S., Liu, W. (2007). Fabrication and characterization of an ultrahigh-temperature carbon fiber-reinforced ZrB2-SiC matrix composite. Journal of American Ceramic Society, 90, 10, 3320–3322, DOI: 10.1111/j.1551-2916.2007.01876.x
  3. Akin, I., Hotta, M., Sahin, F.C., Yucel, O., Goller, G., Goto, T. (2009). Microstructure and densification of ZrB2-SiC composites prepared by spark plasma sintering. Journal European Ceramic Society, 29, 11, 2379–2385, DOI: 10.1016/j.jeurceramsoc.2009.01.011
  4. Hu, H., Wang, Q., Chen, Z., Zhang, C., Zhang, Y., Wang, J. (2010). Preparation and characterization of C/SiC-ZrB2 composites by precursor infiltration and pyrolysis process. Ceramics International, 36, 1011–1016, DOI: 10.1016/j.ceramint.2009.11.015
  5. Shahedi Asl, M. (2017). Microstructure, hardness and fracture toughness of spark plasma sintered ZrB2–SiC–Cf composites. Ceramics International, 43, 17, 15047–15052, DOI: 10.1016/j.ceramint.2017.08.030
  6. Balak, Z., Zakeri, M. (2016). Application of Taguchi L32 orthogonal design to optimize flexural strength of ZrB2-based composites prepared by spark plasma sintering. International Journal of Refractory Metals and Hard Materials, 55, 58-67, DOI: 10.1016/j.ijrmhm.2015.11.009
  7. Karimirad, S., Balak, Z. (2019). Characteristics of spark plasma sintered ZrB2-SiC-SCFs composites. Ceramics International, 45, 5, 6275-6281, DOI: 10.1016/j.ceramint.2018.12.109
  8. ASTM C 373-88: Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products, 2006
  9. Zoli, L., Vinci, A., Silvestroni, L., Sciti, D., Reece, M., Grasso, S. (2017). Rapid spark plasma sintering to produce dense UHTCs reinforced with undamaged carbon fibres. Materials & Design, 130, 1–7, DOI:10.1016/j.matdes.2017.05.029
  10. Monteverde, F., Guicciardi, S., Bellosi, A. (2003). Advances in microstructure and mechanical properties of zirconium diboride based ceramics, Materials Science and Engineering: A, 346, 310–319, DOI: 10.1016/S0921-5093(02)00520-8
  11. Silvestroni, L., Dalle Fabbriche, D., Melandri, C., Sciti, D. (2016). Relationships between carbon fiber type and interfacial domain in ZrB2-based ceramics, Journal of the European Ceramic Society, 36, 1