The densities, phase developments, microstructure analyses and mechanical properties of the composites were determined by the Archimedes principle, X-Ray Diffraction, Scanning Electron Microscopy, and three-point bending test, respectively.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:In this study, the effects of sintering conditions on the structural and mechanical properties of spark plasma sintered ZrB2-based composites were investigated in detail.
📊
Key Findings & Data:In addition, to observe the impact of the binder, the binder was used in some materials.
💡
Conclusion & Impact:The densities, phase developments, microstructure analyses and mechanical properties of the composites were determined by the Archimedes principle, X-Ray Diffraction, Scanning Electron Microscopy, and three-point bending test, respectively.
In this study, the effects of sintering conditions on the structural and mechanical properties of spark plasma sintered ZrB2-based composites were investigated in detail. In addition, to observe the impact of the binder, the binder was used in some materials. Thus, the effects of binder on the properties of composites while preparing ceramic slurry were tested. The effects of the sintering conditions of the materials prepared at different temperatures and stages on the composites were examined in detail. The densities, phase developments, microstructure analyses and mechanical properties of the composites were determined by the Archimedes principle, X-Ray Diffraction, Scanning Electron Microscopy, and three-point bending test, respectively.
AĞIL, A. A., AYAS, E. (2022). Role of sintering conditions on structural and mechanical properties of carbon fiber fabric reinforced ZrB2-Sic composites. European Mechanical Science, Cilt: 6 - Sayı: 4, 278–284. https://ajindex.com/articles/859321
Ding, Y., Dong, S., Huang, Z., Jiang, D. (2007). Fabrication of short C fiber-reinforced SiC composites by spark plasma sintering. Ceramics International, 33, 1, 101–105, DOI: 10.1016/j.ceramint.2005.08.004
Tang, S., Deng, J., Wang, S., Liu, W. (2007). Fabrication and characterization of an ultrahigh-temperature carbon fiber-reinforced ZrB2-SiC matrix composite. Journal of American Ceramic Society, 90, 10, 3320–3322, DOI: 10.1111/j.1551-2916.2007.01876.x
Akin, I., Hotta, M., Sahin, F.C., Yucel, O., Goller, G., Goto, T. (2009). Microstructure and densification of ZrB2-SiC composites prepared by spark plasma sintering. Journal European Ceramic Society, 29, 11, 2379–2385, DOI: 10.1016/j.jeurceramsoc.2009.01.011
Hu, H., Wang, Q., Chen, Z., Zhang, C., Zhang, Y., Wang, J. (2010). Preparation and characterization of C/SiC-ZrB2 composites by precursor infiltration and pyrolysis process. Ceramics International, 36, 1011–1016, DOI: 10.1016/j.ceramint.2009.11.015
Shahedi Asl, M. (2017). Microstructure, hardness and fracture toughness of spark plasma sintered ZrB2–SiC–Cf composites. Ceramics International, 43, 17, 15047–15052, DOI: 10.1016/j.ceramint.2017.08.030
Balak, Z., Zakeri, M. (2016). Application of Taguchi L32 orthogonal design to optimize flexural strength of ZrB2-based composites prepared by spark plasma sintering. International Journal of Refractory Metals and Hard Materials, 55, 58-67, DOI: 10.1016/j.ijrmhm.2015.11.009
Karimirad, S., Balak, Z. (2019). Characteristics of spark plasma sintered ZrB2-SiC-SCFs composites. Ceramics International, 45, 5, 6275-6281, DOI: 10.1016/j.ceramint.2018.12.109
ASTM C 373-88: Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products, 2006
Zoli, L., Vinci, A., Silvestroni, L., Sciti, D., Reece, M., Grasso, S. (2017). Rapid spark plasma sintering to produce dense UHTCs reinforced with undamaged carbon fibres. Materials & Design, 130, 1–7, DOI:10.1016/j.matdes.2017.05.029
Monteverde, F., Guicciardi, S., Bellosi, A. (2003). Advances in microstructure and mechanical properties of zirconium diboride based ceramics, Materials Science and Engineering: A, 346, 310–319, DOI: 10.1016/S0921-5093(02)00520-8
Silvestroni, L., Dalle Fabbriche, D., Melandri, C., Sciti, D. (2016). Relationships between carbon fiber type and interfacial domain in ZrB2-based ceramics, Journal of the European Ceramic Society, 36, 1