Dergiler / Kafkas Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2018 / Cilt: 11 - Sayı: 2

Investigation of Solar Cell Efficiencies and Stabilization Using Polymer-Based Photovoltaic Cells

Polimer Tabanlı Fotovoltaik Hücrelerin Kullanımı ile Solar Hücre Verimlerinin Artışı ve Stabilizasyonun İncelenmesi

Sayfa
48–57
Yayın Tarihi
2018-12-30
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Finally, the latest study demonstrates that, in accordance with experimental observations, the reduction of load-carrier losses is more important than reducing excitation and photon losses to optimize the performance of solar-cell devices.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The use of polymer electronics has the power to revolutionize the field of solar cells by reducing the production costs of large-scale nano-electronic applications.
📊
Temel Bulgular & Veri:At the same time, the performance and stability of polymer-based devices are still low compared to their inorganic counterparts.
💡
Sonuç & Katkı:Finally, the latest study demonstrates that, in accordance with experimental observations, the reduction of load-carrier losses is more important than reducing excitation and photon losses to optimize the performance of solar-cell devices.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Polimer solar hücre verimi · eksiton- hol ayırımı · eksiton taşıma

Özet

The use of polymer electronics has the power to revolutionize the field of solar cells by reducing the production costs of large-scale nano-electronic applications. At the same time, the performance and stability of polymer-based devices are still low compared to their inorganic counterparts. New and comprehensive experimental and theoretical research is needed to reduce energy losses and increase efficiency in these devices. For this purpose, we present the knowledge, development, efficiency levels of polymer based solar cells, the performance of polymer membranes in solar cell. We will examine the relationship between the parameters of the eccentricity and hol carrier parameters, load bearing losses and solar cell variables in the polymer based solar cell with technological importance. Finally, the latest study demonstrates that, in accordance with experimental observations, the reduction of load-carrier losses is more important than reducing excitation and photon losses to optimize the performance of solar-cell devices.

Abstract

Polimer elektroniğinin kullanımı, geniş ölçekli nano elektronik uygulamaların üretim maliyetlerini düşürerek solar hücre alanında devrim yaratma gücüne sahiptir. Aynı zamanda inorganik muadilleriyle karşılaştırıldığında polimer tabanlı cihazların performansı ve kararlılığı, halen düşüktür. Bu cihazlardaki enerji kayıplarının azaltması ve verimliliğinin artırılması konusunda yeni ve kapsamlı deneysel ve teorik araştırmaların yapılması gereklidir. Bu amaçla, bu makalede, polimer esaslı güneş hücrelerinin tanımı, gelişimi, verimlilik düzeyleri, polimer membranların solar hücrede kullanım performansları hakkında bilgi sunuyoruz. Teknolojik önemi olan polimer esaslı güneş-hücresinde fotondaki eksiton ve hol taşıyıcı parametrelerinin, yük taşıma kayıplarının ve solar hücre değişkenlerinin verimlik parametreleriyle ilişkisinin inceleyeceğiz. Son olarak, son çalışmada, deneysel gözlemlerle uyumlu olarak, yük-taşıyıcı kayıplarının azaltılmasının, güneş-hücre aygıtlarının performansını optimize etmek için eksiton ve foton kayıplarını azaltmaktan daha önemli olduğunu ortaya koymaktadır.

🔖

Bu Makaleye Atıf Yap

YILDIKO, Ü., ÇAKMAK, İ. (2018). Investigation of Solar Cell Efficiencies and Stabilization Using Polymer-Based Photovoltaic Cells. Kafkas Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 11 - Sayı: 2, 48–57. https://ajindex.com/articles/836739

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (11)

  1. Antohe, S., S. Iftimie, L. Hrostea, V. A. Antohe and M. Girtan (2017). "A critical review of photovoltaic cells based on organic monomeric and polymeric thin film heterojunctions." Thin Solid Films 642: 219-231.
  2. Chen, B.-C., Y.-S. Cheng, C. Gau and Y.-C. Lee (2014). "Enhanced performance of polymer solar cells with imprinted nanostructures on the active layer." Thin Solid Films 564: 384-389.
  3. Cho, H. J., Y. J. Kim, S. Chen, J. Lee, T. J. Shin, C. E. Park and C. Yang (2017). "Over 10% efficiency in single-junction polymer solar cells developed from easily accessible random terpolymers." Nano Energy 39: 229-237.
  4. Dang, D., P. Zhou, J. Zhong, J. Fan, Z. Wang, Y. Wang, Y. Pei, X. Bao, R. Yang, W. Hu and W. Zhu (2014). "Novel wide band-gap polymer utilizing fused hetero-aromatic unit for efficient polymer solar cells and field-effect transistors." Polymer 55(26): 6708-6716. de la Mora, M. B., O. Amelines-Sarria, B. M. Monroy, C. D. Hernández-Pérez and J. E. Lugo (2017). "Materials for downconversion in solar cells: Perspectives and challenges." Solar Energy Materials and Solar Cells 165: 59-71.
  5. Deng, P., J. Yu, X. Yin, Y. Geng, B. Zhou, F. Zhang and W. Tang (2017). "Effect of bisalkylthio side chains on benzo[1,2-b:4,5-b′]dithiophene-based polymers for organic solar cells." Dyes and Pigments 138: 47-55.
  6. Fan, P., Y. Zheng, D. Zheng and J. Yu (2017). "Improved efficiency of bulk heterojunction polymer solar cells by doping with iridium complex." Materials Letters 186: 161-164.
  7. Fan, Q., Q. Zhu, Z. Xu, W. Su, J. Chen, J. Wu, X. Guo, W. Ma, M. Zhang and Y. Li (2018). "Chlorine substituted 2D-conjugated polymer for high-performance polymer solar cells with 13.1% efficiency via toluene processing." Nano Energy 48: 413-420.
  8. Gao, X., Y. Li, L. Yu, F. Hou, T. Zhu, X. Bao, F. Li, M. Sun and R. Yang (2019). "The regulation of π-bridge of indacenodithiophene-based donor-π-acceptor conjugated polymers toward efficient polymer solar cells." Dyes and Pigments 162: 43-51.
  9. Goetzberger, A., C. Hebling and H.-W. Schock (2003). "Photovoltaic materials, history, status and outlook." Materials Science and Engineering: R: Reports 40(1): 1-46.
  10. Han, G., S. Zhang, P. P. Boix, L. H. Wong, L. Sun and S.-Y. Lien (2017). "Towards high efficiency thin film solar cells." Progress in Materials Science 87: 246-291.
  11. Holliday, S., Y. Li and C. K. Luscombe (2017). "Recent advances in high performance donor-acceptor polymers for organic photovoltaics." Progress in Polymer Science 70: 34-51. Kumar Molu