Dergiler / Journal of the Turkish Chemical Society Section A: Chemistry / 2018 / Cilt: 5 - Sayı: 1

Examination of the Effects of Activated Carbon Produced from Coal Using Single-Step H3PO4/N2+H2O Vapor Activation on the Adsorption of Bovine Serum Albumin at Different Temperatures and pH Values

Sayfa
219–236
Yayın Tarihi
2017-09-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

As a result, it was found out that AC obtained by single step H3PO4/N2+H2O vapor activation is an effective adsorbent for the adsorption of BSA from aqueous solution.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:This study examined protein adsorption equilibrium and kinetics on activated carbon (AC) that we obtained from coal by single-step H3PO4 activation under N2+H2O vapor at 800 °C.
📊
Temel Bulgular & Veri:Surface properties, pore size distribution, and volumes of AC were determined using volumetric method with N2 adsorption at 77 K.
💡
Sonuç & Katkı:As a result, it was found out that AC obtained by single step H3PO4/N2+H2O vapor activation is an effective adsorbent for the adsorption of BSA from aqueous solution.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Coal · Activated Carbon · BSA

Abstract

This study examined protein adsorption equilibrium and kinetics on activated carbon (AC) that we obtained from coal by single-step H3PO4 activation under N2+H2O vapor at 800 °C. Surface properties, pore size distribution, and volumes of AC were determined using volumetric method with N2 adsorption at 77 K. Also, the textural properties were characterized by SEM-EDAX and XRD. The zeta potential values were measured to elucidate the electrostatic interactions between the protein and AC. The obtained AC discrete system was also used as an adsorbent for adsorbing bovine serum albumin (BSA) from aqueous solution. The effects of pH (4.0, 5.0, and 7.4) and temperatures (20, 30 and 40 °C) on the adsorption of BSA on AC were examined. The surface area, micropore, mesopore and total pore volumes of AC were found to be 1175 m2/g, 0.477 cm3/g, 0.061 cm3/g and 0.538 cm3/g, respectively. The optimum temperature for AC in BSA adsorption was found to be 40 °C and the pH was found to be 4.0. The highest BSA adsorption was found to be 159 mg/g and pH to be 4.0. The experimental equilibrium data were compared with the Langmuir and Freundlich models and found to be compatible with both models. The adsorption process is best described by the pseudo-first-order kinetic model. As a result, it was found out that AC obtained by single step H3PO4/N2+H2O vapor activation is an effective adsorbent for the adsorption of BSA from aqueous solution.

🔖

Bu Makaleye Atıf Yap

Toprak, A., BOZGEYİK, K. (2017). Examination of the Effects of Activated Carbon Produced from Coal Using Single-Step H3PO4/N2+H2O Vapor Activation on the Adsorption of Bovine Serum Albumin at Different Temperatures and pH Values. Journal of the Turkish Chemical Society Section A: Chemistry, Cilt: 5 - Sayı: 1, 219–236. https://ajindex.com/articles/781480

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (15)

  1. Lu JR, Zhao X, Yaseen M. Protein adsorption studied by neutron reflection. Current Opinion in Colloid & Interface Science. 2007;12(1):9-16
  2. Hinderliter A, Almeida PF, Creutz CE, Biltonen RL. Domain formation in a fluid mixed lipid bilayer modulated through binding of the C2 protein motif. Biochemistry. 2001;40(13):4181-91
  3. Rabe M, Verdes D, Seeger S. Understanding protein adsorption phenomena at solid surfaces. Advances in colloid and interface science. 2011;162(1):87-106
  4. Kalasin S, Santore MM. Non-specific adhesion on biomaterial surfaces driven by small amounts of protein adsorption. Colloids and Surfaces B: Biointerfaces. 2009;73(2):229-36
  5. Liu J, Lee ML. Permanent surface modification of polymeric capillary electrophoresis microchips for protein and peptide analysis. Electrophoresis. 2006;27(18):3533-46
  6. Roach P, Eglin D, Rohde K, Perry CC. Modern biomaterials: a review—bulk properties and implications of surface modifications. Journal of Materials Science: Materials in Medicine. 2007;18(7):1263-77
  7. Chen H, Yuan L, Song W, Wu Z, Li D. Biocompatible polymer materials: role of protein–surface interactions. Progress in Polymer Science. 2008;33(11):1059-87
  8. Cole MA, Voelcker NH, Thissen H, Griesser HJ. Stimuli-responsive interfaces and systems for the control of protein–surface and cell–surface interactions. Biomaterials. 2009;30(9):1827-50
  9. Huang N-P, Michel R, Voros J, Textor M, Hofer R, Rossi A, et al. Poly (L-lysine)-g-poly (ethylene glycol) layers on metal oxide surfaces: surface-analytical characterization and resistance to serum and fibrinogen adsorption. Langmuir. 2001;17(2):489-98
  10. Heuberger R, Sukhorukov G, Vörös J, Textor M, Möhwald H. Biofunctional polyelectrolyte multilayers and microcapsules: Control of non‐specific and bio‐specific protein adsorption. Advanced Functional Materials. 2005;15(3):357-66
  11. Zürcher S, Wäckerlin D, Bethuel Y, Malisova B, Textor M, Tosatti S, et al. Biomimetic surface modifications based on the cyanobacterial iron chelator anachelin. Journal of the American Chemical Society. 2006;128(4):1064-5
  12. Hlady V, Buijs J, Jennissen HP
  13. Methods for studying protein adsorption. Methods in enzymology. 1999;309:402-29
  14. Liou T-H. Development of mesoporous structure and high adsorption capacity of biomass-based activated carbon by phosphoric acid and zinc chloride activation. Chemical Engineering Journal. 2010;158(2):129-42
  15. Tsai W, Chang C, Wang S, Chang C, Chien S, Sun H. Prepar