Dergiler / Journal of Scientific Reports-A / 2010 / Sayı: 022

MERMER FABRİKASI ATIK SUYUNUN CAM YAPILI MEMBRANE FİLTRELER İLE DOĞRUDAN SÜZÜLMESİNİN ARAŞTIRILMASI

DIRECT FILTRATION OF MARBLE WASTEWATER BY GLASSY CERAMIC MEMBRANE FILTERS

Sayfa
87–98
Yayın Tarihi
2010-08-15
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Bu çalışma atık suyun cam esaslı seramik membran filtreler ile doğrudan süzülerek kazanılmasının mümkün olduğunu göstermektedir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Mermer fabrikaları kesme, yıkama ve parlatma gibi süreçlerde büyük miktarda su kullanmaktadırlar.
📊
Temel Bulgular & Veri:Afyon bölgesinden temin edilen atık suyun katı içeriği %5, buradaki katı 100 mm ile mikron altı boyutlara kadar değişen partiküllerden oluşmaktadır.
💡
Sonuç & Katkı:Bu çalışma atık suyun cam esaslı seramik membran filtreler ile doğrudan süzülerek kazanılmasının mümkün olduğunu göstermektedir.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Seramik filtre · filtrasyon · atıksu

Özet

Mermer fabrikaları kesme, yıkama ve parlatma gibi süreçlerde büyük miktarda su kullanmaktadırlar. Genel uygulama atık suyun ön hazırlama teknikleri, örneğin koagulasyon ve flokülasyon ile çöktürülmesi ve çöken kısmın filtre presler yardımıyla susuzlaştırılması şeklindedir. Bu çalışma atık suyun cam esaslı seramik membran filtreler ile doğrudan süzülerek kazanılmasının mümkün olduğunu göstermektedir. Afyon bölgesinden temin edilen atık suyun katı içeriği %5, buradaki katı 100 mm ile mikron altı boyutlara kadar değişen partiküllerden oluşmaktadır. Ortalama gözenek boyutu 1.15 ve 0.4 mm olan iki farklı cam yapılı membran filtre hazırlanmış olup, atık su periyodik geri yıkamalı filtrasyon sistemi ile süzülmüştür. İri gözenekli filtre süzme işlemi süresince tıkanmış ve filtrenin tam olarak temizlenebilmesi için ultrasonik yıkamaya ihtiyaç duyulmuştur. Buna karşılık ince gözenekli filtre tıkanmayıp yüksek filtrasyon performansı sağlamıştır. Filtrenin süzme kapasitesi her bir metrekare yüzey alanından bir saat süre içersinde 9 ton temiz su sağlanması şeklinde olmuştur. Filtrenin yüksek süzme kapasitesi yanı sıra sağladığı suyun berraklığı da yüksektir (0.2 NTU bulanıklılık).

Abstract

Marble factories use plenty of liquid in the processes of cutting, washing and polishing. Conventionally, pretreatment techniques such as coagulation and flocculation have been applied and the sediment has been dewatered by pressing. This study indicated the possibility of direct filtration of the wastewater by glassy ceramic membrane filters. The marble wastewater obtained from Afyon region has varied in sizes of particles in which 5% solids wt. are sub-micron in size and the maximum size of the particles is about 100 mm. Two different pore sizes of filters (the mean pore sizes being 1.15 mm and 0.4 mm) were tested for the filterability of marble wastewater stream through the periodic filtrate back-flushing process. The coarse pore size filter indicated filtration with seriously pore clogging phenomena, thus the filter recovery required ultrasonic application. The performance of the finer pore size filter is superior in which non-clogging phenomena could be obtained. The filtration capacity of the fine pore size filter was of 9 tons of filtrate per m2 of the filter area through filtration conducted for one hour operation. Besides the high filterability, the filter proved highly clear filtrate (0.2 NTU turbidity).

🔖

Bu Makaleye Atıf Yap

Şan, O., Özgür, C. (2010). MERMER FABRİKASI ATIK SUYUNUN CAM YAPILI MEMBRANE FİLTRELER İLE DOĞRUDAN SÜZÜLMESİNİN ARAŞTIRILMASI. Journal of Scientific Reports-A, Sayı: 022, 87–98. https://ajindex.com/articles/779199

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (13)

  1. Şan, O and Hoşten, Ç., “Filtration testing of a ceramic capillary filter produced from a high-silica glaze”, Miner. Eng,, 15, 553–556 (2002)
  2. Şan, O., “Microstructural characterization of capillary filter produced from a high silica-containing glaze”, Mater. Lett., 57, 21892192 (2003)
  3. Şan, O and Yener, S., “Capillary filters produced from a quartz-natural zeolite-lead borosilicate frit”, Ind. Ceram., 25, 183–186 (2005)
  4. Şan, O and Özgür, C., “Fabrication of glassy ceramic membrane filters for filtration of spring water with clogging phenomena”, J. Membrane Sci., 305, 169–175 (2007)
  5. Hosten, C and San, O., “Role of clogging phenomena in erroneous implications of conventional data analysis for constant pressure cake filtration”, Sep. Sci. Technol., 34. 1759–1772 (1999)
  6. Tiller, F. M. and Crump, J. R., “Solidliquid separation: An overview”, Chem. Eng. Prog., 65-75 (1977)
  7. Lee, D. J., “Filter medium clogging during cake filtration”, Am. Ins. of Chem. Eng. Journal, 41, 273–276 (1997)
  8. Şan, O., “Some filtration parameters of diluted TiO2/water suspensions and the cake microstructure after sintering”, Ceram. Int, 32, 779784 (2006)
  9. Willis M. S. and Tosun, I., “A rigorous cake filtration theory”, Chem. Eng. Sci., 35, 2427–2438 (1980)
  10. Willis, M. S., “The interpretation of nonparabolic filtration data, in Encyclopedia of Fluid Mechanics”, (N. P. Cheremisinoff, Ed.), Gulf Publishing Co., Houston, TX, 839864 (1986)
  11. Caroine, S. and Fitzpatrick, B., “Instrumentation for investigating and optimising filter backwashing”, Filtr. & Sep., 6972 (1998)
  12. Özgür, C. and Şan, O., “Slip cast forming of multilayer ceramic filter by fine particles migration”, Ceram. Int., 34 1935–1939 (2008)
  13. C. Özgür, C., Şan, O. and Karagüzel, C., “Preparation of high performance capillary ceramic filter using frit glass powder”, J.G. Heinrich and C. Aneziric, Proc. 10 th ECerS Conf., Goller Verlag, Baden-Baden, 2116-2121, ISBN: 3-87264-022-4 (2007).