KaydedilenlerDerginizi ekleyin

Dergiler / İmalat Teknolojileri ve Uygulamaları / 2022 / Cilt: 3 - Sayı: 1

A Review on Machinability of Shape Memory Alloys Through Traditional and Non-Traditional Machining Processes: A Review

Farıj BEN SAOUD
Mehmet Erdi KORKMAZ
Sayfa
14–32
Yayın Tarihi
2022-04-29
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

After all, the article has been concluded by suggesting a variety of key points seen throughout the review process.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:This review article offers consolidated knowledge on the subject of several traditional and non-traditional procedures that are taking place throughout the years to form shape memory alloys (SMAs).
📊
Temel Bulgular & Veri:As well, Numerous of outcomes reactions that may occur during the operation procedures have been emphasized such as material removal rate (MRR), rate of tool wear, surface roughness (SR), the surface integrity.
💡
Sonuç & Katkı:After all, the article has been concluded by suggesting a variety of key points seen throughout the review process.
🔬Tür:Literatür & Derleme Çalışması
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Traditional machining. · Non-Traditional machining. · Shape memory alloys.

Özet

This review article offers consolidated knowledge on the subject of several traditional and non-traditional procedures that are taking place throughout the years to form shape memory alloys (SMAs). At the primary part of the review, the usage of several shape memory alloys was shown. The dialogue then continued towards numerous traditional techniques of operating followed by the obstacles in the running of SMAs utilizing traditional techniques of operating. Moreover, numerous non-traditional processes of operations such WJM (Water jet Machining), cryogenic, WEDM (Wire Electro Discharge Machining), EDM (Electro Discharge Machining), and electrochemical machining explored. As well, Numerous of outcomes reactions that may occur during the operation procedures have been emphasized such as material removal rate (MRR), rate of tool wear, surface roughness (SR), the surface integrity. A consolidated records of various academics and their findings on this issue has been evaluated. After all, the article has been concluded by suggesting a variety of key points seen throughout the review process.

Abstract

This review article offers consolidated knowledge on the subject of several traditional and non-traditional procedures that are taking place throughout the years to form shape memory alloys (SMAs). At the primary part of the review, the usage of several shape memory alloys was shown. The dialogue then continued towards numerous traditional techniques of operating followed by the obstacles in the running of SMAs utilizing traditional techniques of operating. Moreover, numerous non-traditional processes of operations such WJM (Water jet Machining), cryogenic, WEDM (Wire Electro Discharge Machining), EDM (Electro Discharge Machining), and electrochemical machining explored. As well, Numerous of outcomes reactions that may occur during the operation procedures have been emphasized such as material removal rate (MRR), rate of tool wear, surface roughness (SR), the surface integrity. A consolidated records of various academics and their findings on this issue has been evaluated. After all, the article has been concluded by suggesting a variety of key points seen throughout the review process.

🔖

Bu Makaleye Atıf Yap

SAOUD, F. B., KORKMAZ, M. E. (2022). A Review on Machinability of Shape Memory Alloys Through Traditional and Non-Traditional Machining Processes: A Review. İmalat Teknolojileri ve Uygulamaları, Cilt: 3 - Sayı: 1, 14–32. https://ajindex.com/articles/770284

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (13)

  1. D. S. T W Duerig, K N Melton, “Engineering Aspects of Shape Memory Alloys,” in Butterworth-Heinemann, 1990, pp. 5–35
  2. C. M. Wayman, “SOME APPLICATIONS OF SHAPE-MEMORY ALLOYS.,” J. Met., vol. 32, no. 6, pp. 129–137, Dec. 1980, doi: 10.1007/bf03354492
  3. L. Kulinsky and M. J. Madou, “9 - BioMEMs for drug delivery applications A2 - Bhansali, Shekhar,” Woodhead Publ. Ser. Biomater., pp. 218–268, 2012
  4. D. J. Hartl and D. C. Lagoudas, “Aerospace applications of shape memory alloys,” Proc. Inst. Mech. Eng. Part G J. Aerosp. Eng., vol. 221, no. 4, pp. 535–552, 2007, doi: 10.1243/09544100JAERO211. [5] “File:Nitinol Austenite and martensite small.jpg - Wikipedia.” [Online]. Available: https://en.wikipedia.org/wiki/File:Nitinol_Austenite_and_martensite_small.jpg. [Accessed: 26-Nov-2021]
  5. I. N. QADER, M. KOK, F. Dağdelen, and Y. AYDOĞDU, “‘A review of smart materials: researches and applications,’” El-Cezeri Fen ve Mühendislik Derg., Sep. 2019, doi: 10.31202/ecjse.562177
  6. P. S. Lobo, J. Almeida, and L. Guerreiro, “Shape Memory Alloys Behaviour: A Review,” Procedia Eng., vol. 114, pp. 776–783, Jan. 2015, doi: 10.1016/J.PROENG.2015.08.025
  7. E. O. Ezugwu, J. Bonney, and Y. Yamane, “An overview of the machinability of aeroengine alloys,” J. Mater. Process. Technol., vol. 134, no. 2, pp. 233–253, Mar. 2003, doi: 10.1016/S0924-0136(02)01042-7
  8. T. KIVAK, K. HABALI, and U. ŞEKER, “The Effect of Cutting Paramaters on The Hole Quality and Tool Wear During The Drilling of Inconel 718,” Gazi Univ. J. Sci., vol. 25, no. 2, pp. 533–540, Apr. 2012
  9. D. Manolakos and A. P. Markopoulos, “A review on the machining of Nickel-Titanium shape memory alloys,” Rev. Adv. Mater. Sci. 42(1), pp. 28-35, Jul. 2015
  10. K. Weinert, V. Petzoldt, and D. Kötter, “Turning and Drilling of NiTi Shape Memory Alloys,” CIRP Ann., vol. 53, no. 1, pp. 65–68, Jan. 2004, doi: 10.1016/S0007-8506(07)60646-5
  11. K. Weinert and V. Petzoldt, “Machining of NiTi based shape memory alloys,” Mater. Sci. Eng. A, vol. 378, no. 1-2 SPEC. ISS., pp. 180–184, Jul. 2004, doi: 10.1016/J.MSEA.2003.10.344
  12. E. Ezugwu, Á. R. Machado, I. Pashby, and J. Wallbank, “The effect of high-pressure coolant supply when machining a heat-resistant nickel-based superalloy,” undefined, 1991
  13. F. Pusavec, H. Hamdi, J. Kopac, and I. S. Jawahir, “Surface integrity in cryogenic machining of nickel based alloy—Inconel 718,” J. Mater. Process. Technol., vol. 211, no. 4, pp. 773–783, Apr. 2011, doi: 10.1016