Dergiler / Environmental Research and Technology / 2020 / Cilt: 3 - Sayı: 4

Treatment of dye-producing chemical industry wastewater by persulfate advanced oxidation

Sayfa
149–156
Yayın Tarihi
2020-12-31
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Moreover, COD removal efficiency was approximately 55-60% in both methods.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:A dye-producing chemical industry wastewater in Çorlu (Tekirdağ) is treated by the coagulation-flocculation process of the wastewater.
📊
Temel Bulgular & Veri:However, the wastewater discharged after coagulation-flocculation still has a very high COD (4402 mg L-1) with very high proportion of dissolved COD (4316 mg L-1).
💡
Sonuç & Katkı:Moreover, COD removal efficiency was approximately 55-60% in both methods.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Activation · kinetics · oxidation

Abstract

A dye-producing chemical industry wastewater in Çorlu (Tekirdağ) is treated by the coagulation-flocculation process of the wastewater. However, the wastewater discharged after coagulation-flocculation still has a very high COD (4402 mg L-1) with very high proportion of dissolved COD (4316 mg L-1). Therefore, the aim of this study is to achieve higher COD and color removal in wastewater using Fe2+/S2O8 or UV/S2O8 oxidation process after coagulation-flocculation. The processes in the oxidation of this industrial wastewater using Fe2+/S2O8 and UV/S2O8 were examined and the effect of COD/Fe2+/S2O8 ratio (in Fe2+/S2O8) or COD/S2O8 ratio (in UV/S2O8), pH and oxidation time were evaluated in the study. While high organic matter and color removal was observed in acidic conditions for both processes, optimum pH were 3 and 6 in Fe2+/S2O8 and UV/S2O8 oxidation processes, respectively. In Fe2+/S2O8 oxidation, 61.1% of COD removal and above 97% of color (UV436, UV525 and UV620) removal was obtained at 1/8/8 of COD/Fe2+/S2O8 ratio and pH 3 after 1 h oxidation. In UV/S2O8 oxidation (COD/S2O8 ratio 1/8, pH 6), 54.4% of COD and 98% of color (UV436, UV525 and UV620) removals were achieved after 4 h oxidation. As a result, both Fe2+/S2O8 and UV/S2O8 oxidation processes were applied to ensure discharge standards for color removal from this chemical industry wastewater are effective methods as they provide over 97% color removal. Moreover, COD removal efficiency was approximately 55-60% in both methods.

🔖

Bu Makaleye Atıf Yap

CİFCİ, D. İ., GÜNEŞ, E., GÜNEŞ, Y. (2020). Treatment of dye-producing chemical industry wastewater by persulfate advanced oxidation. Environmental Research and Technology, Cilt: 3 - Sayı: 4, 149–156. https://ajindex.com/articles/754243

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (1)

  1. . V. García, E. Pongrácz and R. Keiski, “Waste minimization in the chemical industry: From theory to practice”, Proceedings of the Waste Minimization and Resources Use Optimization Conference, pp. 93-106, 2004. [2]. M. Kornaros and G. Lyberatos, “Biological treatment of wastewaters from a dye manufacturing company using a trickling filter”, Journal of Hazardous Materials, Vol. 136, pp. 95-102, 2006. [3]. H.-Y. Shu and W.-P. Hsieh, “Treatment of dye manufacturing plant effluent using an annular UV/H2O2 reactor with multi-UV lamps”, Separation and Purification Technology, Vol. 51, pp. 379-386, 2006. [4]. F. Sun, B. Sun, J. Hu, Y. He and W. Wu, “Organics and nitrogen removal from textile auxiliaries wastewater with A2O-MBR in a pilot-scale”, Journal of Hazardous Materials, Vol. 286, pp. 416-424, 2015. [5]. E. Kattel, N. Dulova, M. Viisimaa, T. Tenno and M. Trapido, “Treatment of high-strength wastewater by Fe2+-activated persulphate and hydrogen peroxide”, Environmental Technology, Vol. 37 (3), pp. 352-359, 2016. [6]. I.A. Ike, K.G. Linden, J.D. and M. Orbell Duke, “Critical review of the science and sustainability of persulphate advanced oxidation processes”, Chemical Engineering Journal, Vol. 338, pp. 651-669, 2018. [7]. P. Devi, U. Das and A.K. Dalai, “In-situ chemical oxidation: Principle and applications of peroxide and persulfate treatments in wastewater systems”, Science of the Total Environment, Vol. 571, pp. 643-657, 2016. [8]. R. Guo, Q. Meng, H. Zhang, X. Zhang, B. Li, Q. Cheng and X. Cheng, “Construction of Fe2O3/Co3O4/exfoliated graphite composite and its high efficient treatment of landfill leachate by activation of potassium persulfate”, Chemical Engineering Journal, Vol. 355, pp. 952-962, 2019. [9]. L.W. Matzek and K.E. Carter, “Activated persulfate for organic chemical degradation: A review”, Chemosphere, Vol. 151, pp. 178-188, 2016. [10]. S. Wacławek, H.V. Lutze, K. Grübel, V.V.T. Padil, M. Černík and D.D. Dionysiou, “Chemistry of persulfates in water and wastewater treatment: A review”, Chemical Engineering Journal, Vol. 330, pp. 44-62, 2017. [11]. S.Y. Guvenc, “Optimization of COD removal from leachate nanofiltrationconcentrate using H2O2/Fe+2/heat - Activated persulfate oxidation processes”, Process Safety and Environmental Protection, Vol. 126, pp. 7-17, 2019. [12]. T.T. Asha, R. Gandhimathi, S.T. Ramesh and P.V. Nidheesh, “Treatment of stabi-lized leachate by ferrous-activated persulfate oxidative system”, Journal of Hazardous, Toxic