Yapay Zeka Hızlı Bakış & Çıkarımlar
AI InsightMoreover, COD removal efficiency was approximately 55-60% in both methods.
📌 3 Maddede Bu Makale
Abstract
A dye-producing chemical industry wastewater in Çorlu (Tekirdağ) is treated by the coagulation-flocculation process of the wastewater. However, the wastewater discharged after coagulation-flocculation still has a very high COD (4402 mg L -1 ) with very high proportion of dissolved COD (4316 mg L -1 ). Therefore, the aim of this study is to achieve higher COD and color removal in wastewater using Fe 2+ /S 2 O 8 or UV/S 2 O 8 oxidation process after coagulation-flocculation. The processes in the oxidation of this industrial wastewater using Fe 2+ /S 2 O 8 and UV/S 2 O 8 were examined and the effect of COD/Fe 2+ /S 2 O 8 ratio (in Fe 2+ /S 2 O 8 ) or COD/S 2 O 8 ratio (in UV/S 2 O 8 ), pH and oxidation time were evaluated in the study. While high organic matter and color removal was observed in acidic conditions for both processes, optimum pH were 3 and 6 in Fe 2+ /S 2 O 8 and UV/S 2 O 8 oxidation processes, respectively. In Fe 2+ /S 2 O 8 oxidation, 61.1% of COD removal and above 97% of color (UV 436 , UV 525 and UV 620 ) removal was obtained at 1/8/8 of COD/Fe 2+ /S 2 O 8 ratio and pH 3 after 1 h oxidation. In UV/S 2 O 8 oxidation (COD/S 2 O 8 ratio 1/8, pH 6), 54.4% of COD and 98% of color (UV 436 , UV 525 and UV 620 ) removals were achieved after 4 h oxidation. As a result, both Fe 2+ /S 2 O 8 and UV/S 2 O 8 oxidation processes were applied to ensure discharge standards for color removal from this chemical industry wastewater are effective methods as they provide over 97% color removal. Moreover, COD removal efficiency was approximately 55-60% in both methods.