Dergiler / Bilge International Journal of Science and Technology Research / 2018 / Özel Sayı - International Conference on Science and Technology (ICONST 2018)

Preparation and Performance of Electroless Nickel on HVOF (High-Velocity Oxygen Fuel) Sprayed Inconel 625 Nickel Coating for Corrosion Protection Applications

Sayfa
19–24
Yayın Tarihi
2018-12-31
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Electroless Ni-P also caused the remarkable increasing in the corrossion resistance as compared to the as-HVOF sprayed state.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:High Velocity Oxy-Fuel (HVOF) spraying is one of the preferred surface engineering technologies that can offer advantages such as user-friendliness and cost-efficiency in mass production of coatings for various applications.
📊
Temel Bulgular & Veri:Low carbon steel substrates were High-Velocity Oxygen Fuel (HVOF) sprayed with Inconel 625 and then coated with a thin film of electroless nickel (electroless nickel plating).
💡
Sonuç & Katkı:Electroless Ni-P also caused the remarkable increasing in the corrossion resistance as compared to the as-HVOF sprayed state.
🔬Tür:Uygulamalı Anket & Alan Araştırması
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Corrosion · HVOF Spraying · Inconel 625

Abstract

High Velocity Oxy-Fuel (HVOF) spraying is one of the preferred surface engineering technologies that can offer advantages such as user-friendliness and cost-efficiency in mass production of coatings for various applications. While the main applications of the HVOF process are related to wear, corrosion resistance can be one of the important desired features of the surface engineering process. However, the porosity of HVOF sprayed coatings is usually a problem when coatings are used in corrosion applications. Low carbon steel substrates were High-Velocity Oxygen Fuel (HVOF) sprayed with Inconel 625 and then coated with a thin film of electroless nickel (electroless nickel plating). Reference sample without electroless nickel was sprayed at the same time. Characterization of the coatings was made by X-Ray diffraction analyses, microstructural surveys, cross-section and corrosion tests. Results showed that sequential application of HVOF spraying and electroless coating processes provided the multi-layered coating consisting of an inner inconel 625 based layer and an outer Ni-P layer. Electroless Ni-P also caused the remarkable increasing in the corrossion resistance as compared to the as-HVOF sprayed state.

🔖

Bu Makaleye Atıf Yap

MİNDİVAN, H., TOPÇU, R. H. (2018). Preparation and Performance of Electroless Nickel on HVOF (High-Velocity Oxygen Fuel) Sprayed Inconel 625 Nickel Coating for Corrosion Protection Applications. Bilge International Journal of Science and Technology Research, Özel Sayı - International Conference on Science and Technology (ICONST 2018), 19–24. https://ajindex.com/articles/742695

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (7)

  1. Abioye, T.E., McCartney, D.G., Clare, A.T. (2015). Laser cladding of Inconel 625 wire for corrosion protection. Journal of Materials Processing Technology, 217, 232-240.
  2. Hjornhede, A., Nylund, A. (2004). Adhesion testing of thermally sprayed and laser deposited coatings. Surface and Coatings Technology 184, 208–218.
  3. Johnson, L., Niaz, A., Boatwright, A., Voisey, K.T., Walsh, D.A. (2011). Scanning electrochemical microscopy at thermal sprayed anti-corrosion coatings: Effect of thermal spraying on heterogeneous electron transfer kinetics. Journal of Electroanalytical Chemistry, 657, 46–53.
  4. Nemecek, S., Fidler, L., Fišerova, P. (2014). Corrosion resistance of laser clads of Inconel 625 and Metco 41C. Physics Procedia, 56, 294 – 300. Poza, P., Múnez, C.J., Garrido-Maneiro, M.A., Vezzù, S., Rech, S., Trentin, A. (2014). Mechanical properties of Inconel 625 cold-sprayed coatings after laser remelting. Depth sensing indentation analysis. Surface & Coatings Technology, 243, 51–57.
  5. Rakhes, M., Koroleva, E., and Liu, Z. (2011). Improvement of corrosion performance of HVOF MMC coatings by laser surface treatment. Surface Engineering, 27 (10), 729-733.
  6. Sidhu, T. S., Prakash, S., and Agrawal, R. D. (2005). Studies on the properties of high-velocity oxy–fuel thermal spray coatings for higher temperature applications. Materials Science, 41(6), 805-823.
  7. Yan, D., G. Yu, B. Hu, J. Zhang, Z. Song, X. Zhang. (2015). An innovative procedure of electroless nickel plating in fluoride-free bath used for AZ91D magnesium alloy. Journal of Alloys and Compounds 653, 271-278.