KaydedilenlerDerginizi ekleyin

Dergiler / Hittite Journal of Science and Engineering / 2022 / Cilt: 9 - Sayı: 2

Bending Response of Lattice Structure Filled Tubes under Transverse Loading

Erhan CETİN
Cengiz BAYKASOGLU
Sayfa
151–158
Yayın Tarihi
2022-06-30
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

These primary outcomes reveal that the proposed lattice structures can be considered as a potential alternative to traditional filler materials for enhancing the bending response of thin-walled tubes under transverse loading.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Thin-walled tubes are widely used as passive energy-absorbing structures in a variety of industries.
📊
Temel Bulgular & Veri:At this point, additive manufacturing technology offers a great chance researchers for the production of novel filler structures to increase the crashworthiness performance of thin-walled tubes.
💡
Sonuç & Katkı:These primary outcomes reveal that the proposed lattice structures can be considered as a potential alternative to traditional filler materials for enhancing the bending response of thin-walled tubes under transverse loading.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Lattice structures · Thin-Walled Tubes · Energy Absorption Performance

Abstract

Thin-walled tubes are widely used as passive energy-absorbing structures in a variety of industries. These structures are typically filled with lightweight materials to improve their energy absorption capabilities. At this point, additive manufacturing technology offers a great chance researchers for the production of novel filler structures to increase the crashworthiness performance of thin-walled tubes. In the current work, additive manufacturable body-centered cubic (BCC) lattice structures are suggested as filling materials for thin-walled tubes, and the bending response of these structures is investigated under transverse loads via a finite element modeling approach. The aspect ratio and strut diameter are considered as design parameters, and three-point bending simulations are conducted to understand the transverse load bearing behaviors of the structures. Different loading offsets are also taken into account for three-point bending simulations. The numerical results revealed that the BCC lattice structures used as filler materials significantly increase the energy absorption performance of thin-walled tubes due to synergetic interactions. In particular, the simulation results revealed that the hybrid tubes can absorb up to 84% more energy than the empty tubes, while the crush force efficiency of these structures is up to 42% higher compared to the empty tubes. The present study also showed that the transverse crushing characteristics of tubes can be considerably improved by suitable selection of the design parameters. These primary outcomes reveal that the proposed lattice structures can be considered as a potential alternative to traditional filler materials for enhancing the bending response of thin-walled tubes under transverse loading.

🔖

Bu Makaleye Atıf Yap

CETİN, E., BAYKASOGLU, C. (2022). Bending Response of Lattice Structure Filled Tubes under Transverse Loading. Hittite Journal of Science and Engineering, Cilt: 9 - Sayı: 2, 151–158. https://ajindex.com/articles/671600

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (13)

  1. Meran AP, Baykasoglu C, Mugan A. Development of a design for a crash energy management system for use in a railway passenger car. Proc Inst Mech Eng Part F J Rail Rapid Transit 2016;230:206–19.
  2. Bhutada S, Goel MD. Crashworthiness parameters and their improvement using tubes as an energy absorbing structure: an overview. Int J Crashworthiness 2021;0:1–32. https://doi.org/10.10 80/13588265.2021.1969845
  3. Abramowicz W. Thin-walled structures as impact energy absorbers. Thin-Walled Struct 2003;41:91–107.
  4. Alghamdi AAA. Collapsible impact energy absorbers: An overview. Thin-Walled Struct 2001;39:189–213.
  5. Baroutaji A, Sajjia M, Olabi AG. On the crashworthiness performance of thin-walled energy absorbers: Recent advances and future developments. Thin-Walled Struct 2017;118:137–63.
  6. Mat F, Ismail KA, Yaacob S, Inayatullah O. Impact Response of Thin-Walled Tubes: A Prospective Review. Appl Mech Mater 2012;165:130–4.
  7. Olabi AG, Morris E, Hashmi MSJ. Metallic tube type energy absorbers: A synopsis. Thin-Walled Struct 2007;45:706–26.
  8. Yuen SCK, Nurick GN. The Energy-Absorbing Characteristics of Tubular Structures With Geometric and Material Modifications: An Overview. Appl Mech Rev 2008;61:020802. https://doi. org/10.1115/1.2885138
  9. Karagiozova D, Alves M. Transition from progressive buckling to global bending of circular shells under axial impact - Part I: Experimental and numerical observations. Int J Solids Struct 2004;41:1565–80.
  10. Karagiozova D, Jones N. Dynamic effects on buckling and energy absorption of cylindrical shells under axial impact. Thin-Walled Struct 2001;39:583–610.
  11. Baykasoglu C, Cetin MT. Energy absorption of circular aluminium tubes with functionally graded thickness under axial impact loading. Int J Crashworthiness 2015;20:95–106. https://doi.org/10. 1080/13588265.2014.982269
  12. Emin M, Baykasoglu C, Tunay M. Quasi-static Axial Crushing Behavior of Thin-walled Circular Aluminum Tubes with Functionally Graded Thickness. Procedia Eng 2016;149:559–65.
  13. Baykasoglu A, Baykasoglu C. Crashworthine