KaydedilenlerDerginizi ekleyin

Dergiler / Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi / 2008 / Cilt: 10 - Sayı: 2

AKIM ÇARPMA TEKNİĞİ KULLANILARAK 7-SEVİYELİ AKIM-MODLU ANALOG/SAYISAL DÖNÜŞTÜRÜCÜ TASARIMI

7-BIT CURRENT-MODE ANALOG/DIGITAL CONVERTER DESIGN BASED ON CURRENT MULTIPLICATION TECHNIQUE

Yavuz İNCE
Özge ŞAHİN
Sayfa
13–22
Yayın Tarihi
2008-05-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

In development of these analog-to-digital (AD) converters current mode signal processing is chosen

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:voltage and low power applications because of not requiring high precision resistors or capacitors.
📊
Temel Bulgular & Veri:And one reason to be chosen current mode signal processing is many signal sources are current-type, such as temperature sensors, photo sensors and many others in biomedical.
💡
Sonuç & Katkı:In development of these analog-to-digital (AD) converters current mode signal processing is chosen
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Analog sayısal çevirici · Akım modlu yaklaşım · Akım aynaları

Özet

voltage and low power applications because of not requiring high precision resistors or capacitors. And one reason to be chosen current mode signal processing is many signal sources are current-type, such as temperature sensors, photo sensors and many others in biomedical. This study reports development and simulation of two types of Analog/Digital Converters (ADCs)for low-power and small area applications, such as implantable telemetric biomedical recording applications. In development of these analog-to-digital (AD) converters current mode signal processing is chosen

Abstract

Current mode signal processing has some advantages over voltage mode signal processing in low voltage and low power applications because of not requiring high precision resistors or capacitors. And one reason to be chosen current mode signal processing is many signal sources are current-type, such as temperature sensors, photo sensors and many others in biomedical. This study reports development and simulation of two types of Analog/Digital Converters (ADCs)for low-power and small area applications, such as implantable telemetric biomedical recording applications. In development of these analog-to-digital (AD) converters current mode signal processing is chosen.

🔖

Bu Makaleye Atıf Yap

İNCE, Y., ŞAHİN, Ö. (2008). AKIM ÇARPMA TEKNİĞİ KULLANILARAK 7-SEVİYELİ AKIM-MODLU ANALOG/SAYISAL DÖNÜŞTÜRÜCÜ TASARIMI. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, Cilt: 10 - Sayı: 2, 13–22. https://ajindex.com/articles/659355

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (4)

  1. Gray P. R., Meyer R. G. (2001): “Analysis and Design of Analog Integrated Circuits”, John Wiley and Sons, Inc. Helble H. (2004): “Development of a CMOS A/D Converter for an Artificial Synapsis”, Diploma Degree thesis, Fachhochschule Konstanz. Johns D., Martin K. (1997): “Analog Integrated Circuit Design”, John Wiley and Sons, Inc. Maloberti F. (2001): “Analog Design for CMOS VLSI Systems”, Kluwer Academic Publishers,
  2. Netherlands. Nairn D. G., Salama C. A. T. (1988): “Current-Mode Algorithmic Analog-to-Digital Converter”, International Symposium on Circuits and Systems, s. 2573-2576.
  3. Nairn D. G., Salama C. A. T. (1990): “Algorithmic Analogue-to-Digital Converters Using Current-Mode Techniques”, IEE Proceedings, Cilt. 137, s. 163-168.
  4. Tezel A. (1999): “VLSI Implementation of Low Power Current Mode CMOS Algorithmic Analog to Digital Converters”, MSc., Thesis. Middle East Technical University. Toumazou C., Lidgey F., Haigh D. G. (1990): “Analogue IC Design: the Current-Mode Approach” Peter Peregrinus Ltd., London.