KaydedilenlerDerginizi ekleyin

Dergiler / Research on Engineering Structures and Materials / 2021 / Cilt: 7 - Sayı: 4

Characterization of low-cost inkjet printed-photonic cured strain gauges for remote sensing and structural monitoring applications

Alp KARAKOÇ
Juho KERMINEN
Kalle RUTTIK
Riku JANTTI
Hüseyin YİĞİTLER
Jenny WIKLUND
Sayfa
647–660
Yayın Tarihi
2022-10-19
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The measurement results demonstrated an affordable, rapid and tailorable design and repeatable fabrication approach for strain gauges with GFavg~6.6, which has potential applications in remote sensing and structural monitoring applications.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In the present work, cost-effective strain gauges were fabricated by using inkjet printing and photonic curing on flexible and recyclable PET substrates.
📊
Temel Bulgular & Veri:DC resistance) (R0) and complex electrical impedance (Z) as a function of test frequency were characterized, respectively, with the state-of-theart electronic testing equipments.
💡
Sonuç & Katkı:The measurement results demonstrated an affordable, rapid and tailorable design and repeatable fabrication approach for strain gauges with GFavg~6.6, which has potential applications in remote sensing and structural monitoring applications.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Abstract

In the present work, cost-effective strain gauges were fabricated by using inkjet printing and photonic curing on flexible and recyclable PET substrates. Ohmic resistance (a.k.a. DC resistance) (R0) and complex electrical impedance (Z) as a function of test frequency were characterized, respectively, with the state-of-theart electronic testing equipments. For the fabrication process, commercially available silver nanoparticle (AgNP) inks and substrates were used. In order to validate the in-house cantilever beam measurement setup and devices, first, commercially available metallic foil strain gauges (with the provided gauge factor GF=2.0 by the manufacturer) were tested at different locations. Thereafter, the printed strain gauges were investigated with several repetitions at different measurement locations. The measurement results demonstrated an affordable, rapid and tailorable design and repeatable fabrication approach for strain gauges with GFavg~6.6, which has potential applications in remote sensing and structural monitoring applications.

🔖

Bu Makaleye Atıf Yap

KARAKOÇ, A., KERMINEN, J., RUTTIK, K., JANTTI, R., YİĞİTLER, H., WIKLUND, J. (2022). Characterization of low-cost inkjet printed-photonic cured strain gauges for remote sensing and structural monitoring applications. Research on Engineering Structures and Materials, Cilt: 7 - Sayı: 4, 647–660. https://ajindex.com/articles/588847

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (12)

  1. KT, Watkins JK, Phero T, Litteken D, Tsai K, Bingham T, Ranganatha KL, Johnson BC, Deng Z, Jaques B, Estrada D. Aerosol jet printed capacitive strain gauge for soft structural materials. npj Flexible Electronics, 4:2397-4621, 2020.
  2. Mitterlehner T, Beisteiner C, Polixmair M, Steinbichler G. Injection molding parts with integrated all-inkjet printed strain gauge for condition monitoring. In ANTECÂ 2018 - Proceedings of the Technical Conference & Exhibition, Orlando, FL, May 7-10, 2018. Society of Plastics Engineers, 2018
  3. Yi Y, Wang B, Bermak A. A low-cost strain gauge displacement sensor fabricated via shadow mask printing. Sensors, 19(21):4713, 2019.
  4. Kim J, Kim K, Ham SW, Bae NH, Park MY, Min NK. A hydrogen pressure sensor based on bulk-micromachined silicon strain gauges. Procedia Engineering, 168:790-793, 2016.
  5. Shakeel M, Khan WA, Rahman K. Fabrication of cost effective and high sensitivity resistive strain gauge using DIW technique. Sensors and Actuators A: Physical, 258:123-130, 2017.
  6. Thompson B, Yoon HW. Aerosol-printed strain sensor using PEDOT:PSS. IEEE Sensors Journal, 13(11):4256-4263, 2013.
  7. Andò B, Baglio S, La Malfa S, L'Episcopo G. All inkjet printed system for strain measurement. In Sensort, 2011 IEEE, pages 215-217. IEEE, 2011.
  8. Mantysalo M, Pekkanen V, Kaija K, Niittynen J, Koskinen S, Halonen E, Mansikkamaki P, Hameenoja O. Capability of inkjet technology in electronics manufacturing. In 59th Electronic Components and Technology Conference, pages 1330-1336. IEEE, 2009.
  9. Ando B, Baglio S. All-inkjet printed strain sensors. IEEE Sensors Journal, 13(12):4874- 4879, 2013.
  10. Wiklund J, Karakoç A, Palko T, Yiğitler H, Ruttik K, Jäntti R, Paltakari J. A review on printed electronics: Fabrication methods, inks, substrates, applications and environmental impacts. Journal of Manufacturing and Materials Processing, 5(3):89, 2021.
  11. Cummins G, Desmulliez MPY. Inkjet printing of conductive materials: a review. Circuit World, 38(4):193-213, 2012.
  12. Özkan M, Dimic-Misic K, Karakoc A, Hashmi SG, Lund P, Malone