Dergiler / Research on Engineering Structures and Materials / 2021 / Cilt: 7 - Sayı: 3

The effect of various mineral fillers on thermal, mechanical, and rheological properties of polypropylene

Sayfa
361–373
Yayın Tarihi
2022-10-19
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The rheological properties of samples were more affected by the talc than calcium carbonate.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Polypropylene is one of the commodity thermoplastics that is widely used in many different applications such as automotive, building, electric-electronics, textile, and packaging industries due to its properties and favorable cost-benefit ratio.
📊
Temel Bulgular & Veri:The filler weight ratio, type, size, and dimension have significant effect on mechanical, thermal, physical, and rheological properties of composites.
💡
Sonuç & Katkı:The rheological properties of samples were more affected by the talc than calcium carbonate.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Abstract

Polypropylene is one of the commodity thermoplastics that is widely used in many different applications such as automotive, building, electric-electronics, textile, and packaging industries due to its properties and favorable cost-benefit ratio. The incorporation of mineral fillers such as mica, talc, wollastonite, and calcium carbonate into thermoplastics is a common practice in the plastics industry in order to reduce the production costs of molded products and enhance processibility, mechanical, and thermal properties. Mineral filled polypropylene composites provides high mechanical stiffness, thermal stability, and good dimensional stability over a wide temperature range. The filler weight ratio, type, size, and dimension have significant effect on mechanical, thermal, physical, and rheological properties of composites. Four different mineral fillers (talc, mica, calcite, and feldspar) at weight fractions of 40% were compounded with polypropylene by using a twin-screw extruder. Test specimens were obtained by injection molding process. The effect of various filler types on rheological and mechanical properties of polypropylene was investigated in this study. It was found that talc and mica loadings at 40 wt. % into polypropylene increased the flexural strength of polypropylene. The rheological properties of samples were more affected by the talc than calcium carbonate.

🔖

Bu Makaleye Atıf Yap

ALTAY, L., SARIKANAT, M., SEKİ, Y., SAĞLAM, M., UYSALMAN, T. (2022). The effect of various mineral fillers on thermal, mechanical, and rheological properties of polypropylene. Research on Engineering Structures and Materials, Cilt: 7 - Sayı: 3, 361–373. https://ajindex.com/articles/588846

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (10)

  1. Chung TC, Rhubright D. Synthesis of functionalized polypropylene. Macromolecules, 1991, 24(4):970-972.
  2. Tjong SC, Xu S-A, Li RK-Y, Mai Y-W. Mechanical behavior and fracture toughness evaluation of maleic anhydride compatibilized short glass fiber/SEBS/polypropylene hybrid composites. Composites Science and Technology, 2002, 62(6):831-840.
  3. D'Orazio L, Mancarella C, Martuscelli E, Sticotti G, Massari P. Melt rheology, phase structure and impact properties of injection-moulded samples of isotactic polypropylene/ethylene-propylene copolymer (iPP/EPR) blends: influence of molecular structure of EPR copolymers. Polymer, 1993, 34(17):3671-3681.
  4. Chan C-M, Wu J, Li J-X, Cheung Y-K. Polypropylene/calcium carbonate nanocomposites. Polymer, 2002, 43(10):2981-2992.
  5. Lapcik Jr L, Jindrova P, Lapcikova B, Tamblyn R, Greenwood R, Rowson N. Effect of the talc filler content on the mechanical properties of polypropylene composites. Journal of Applied Polymer Science, 2008, 110(5):2742-2747.
  6. Ray SS, Okamoto M. Polymer/layered silicate nanocomposites: a review from preparation to processing. Progress in polymer science, 2003, 28(11):1539-1641.
  7. Fu SY, Lauke B, Mäder E, Yue CY, Hu X. Tensile properties of short-glass-fiber- and short-carbon-fiber-reinforced polypropylene composites. Composites Part A: Applied Science and Manufacturing, 2000, 31(10):1117-1125.
  8. Xavier S, Sharma Y. Structure‐property relations in polypropylene mica composites. Polymer Composites, 1986, 7(1):42-49.
  9. Mina MF, Seema S, Matin R, Rahaman MJ, Sarker RB, Gafur MA, et al. Improved performance of isotactic polypropylene/titanium dioxide composites: effect of processing conditions and filler content. Polymer Degradation and Stability, 2009, 94(2):183-188.
  10. Premalal HGB, Ismail H, Baharin A. Comparison of the mechanical properties of rice husk powder filled polypropylene composites with talc filled polypropylene composites. Polymer Testing, 2002, 21(7):833-839. https://doi.org/10.1016/S0142- 9418(02)00018-1 [11] Kellar JJ. Functional fillers and nanoscale minerals: new markets/new hor