Dergiler / Research on Engineering Structures and Materials / 2022 / Cilt: 8 - Sayı: 1

Effect of position of steel bracing in L-shape reinforced concrete buildings under lateral loading

Sayfa
155–177
Yayın Tarihi
2022-10-19
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

While designing irregular buildings with steel bracings, the torsional effect should be checked.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The level of damage in irregular structures is more compared to regular structures.
📊
Temel Bulgular & Veri:It is also noticed that adding the steel bracing decreases the inter-story drift, displacements of the structure effectively.
💡
Sonuç & Katkı:While designing irregular buildings with steel bracings, the torsional effect should be checked.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Abstract

The level of damage in irregular structures is more compared to regular structures. In this study, L shaped RC buildings are investigated with and without steel bracings in different positions in frames. The response spectrum analysis has been done by using ETABs software. The two cases considered, case I and case II for understanding the effect in inverted V bracing in L shape building. Case II shows the suitable seismic parameters when bracing is used properly. Interstory drift, displacements, base shear, fundamental time period, torsional irregularity ratio and the capacity ratio of the columns are evaluated. It is also noticed that adding the steel bracing decreases the inter-story drift, displacements of the structure effectively. The torsional irregularity ratio of each 12 models are studied carefully. The capacity ratio of the selected columns is studied to understand the performance of the columns while using the steel bracing in the buildings. The steel bracings are effectively used as retrofitting in L shaped buildings if the position of bracings are considered in the frames appropriately. While designing irregular buildings with steel bracings, the torsional effect should be checked.

🔖

Bu Makaleye Atıf Yap

BOHARA, B. K., GANAIE, K. H., SAHA, P. (2022). Effect of position of steel bracing in L-shape reinforced concrete buildings under lateral loading. Research on Engineering Structures and Materials, Cilt: 8 - Sayı: 1, 155–177. https://ajindex.com/articles/588832

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (12)

  1. Dutta SC, Mukhopadhyay PS, Saha R, Sanket N. 2011 Sikkim Earthquake at Eastern Himalayas: Lessons learnt from performance of structures. Soil Dynamics and Earthquake Engineering, 2015; 75: 121-129.
  2. Mohammad Z, Baqi A, Arif M. Seismic Response of RC Framed Buildings Resting on Hill Slopes. Procedia Engineering, 2017; 173:1792-1799.
  3. Surana M, Meslem A, Singh Y, Lang DH, Analytical evaluation of damage probability matrices for hill-side RC buildings using different seismic intensity measures. Engineering Structures, 2020; 207: 110254.
  4. Siva Naveen E, Abraham NM, Anitha Kumar SD. Analysis of Irregular Structure under Earthquake Loads. Procedia Structural Integrity, 2019; 14: 806-819.
  5. Haque M, Ray S, Chakraborty A, Elias M, Alam I. Seismic performance analysis of RC multi-storied buildings with Plan irregularity. Am J of Civil Eng. 2016; 4(3):68-73.
  6. Chopra AK, Goel RK. A modal pushover analysis procedure to estimate seismic demands for unsymmetric‐plan buildings. Earthquake engineering & structural dynamics, 2004; 33(8): 903-927.
  7. Moghadam AS, Tso WK. Pushover analysis for asymmetric and set-back multi-story buildings. In Proceedings of the 12th world conference on earthquake engineering, 2000; Vol. 1093
  8. Sachin Maske G, Pajgade PS. Torsional behaviour of asymmetrical buildings. Int J Modern Eng Res. 2013; 3(2): 1146-9
  9. Dya AFC,Oretaa AWC. Seismic vulnerability assessment of soft story irregular buildings using pushover analysis. Procedia Engineering, 2015; 125: 925-932.
  10. Valente M. Seismic upgrading strategies for non-ductile plan-wise irregular R/C structures. Procedia Engineering, 2013; 54: 539-553.
  11. Mazza F. Displacement-based seismic design of hysteretic damped braces for retrofitting in-plan irregular rc framed structures. Soil Dynamics and Earthquake Engineering, 2014;66:231-240.
  12. Mazza F, Mazza M, Vulcano A. Displacement-based seismic design of hysteretic damped braces for retrofitting in-elevation irregular rc framed structures. Soil Dynamics and Earthquake Engineering, 2015; 69: 115-124. https://doi.org/10.1016/j.soil